• 한국인터넷방송통신학회논문지
• /
• 제23권2호
• /
• pp.157-162
• /
• 2023

태양광발전 설비의 고장 중 서지에 의한 고장이 전체 고장률의 20% 차지하고 있으며 발전 중 수십에서 수백[A]의 에너지 방출과 인버터, 접속반 등의 전기적 손상은 전기안전사고로 이어지고 있다. 특히 낙뢰의 경우 전기회로에 이상 전압이 유기되어 절연을 파괴할 뿐만 아니라 이때 흐르는 전류는 화재의 원인이 되고 부품의 열화를 촉진하는 요인으로 작용한다. 이러한 작용으로 도심 밖에서 주택, 아파트, 관공서 등의 도심 내부로 확산하고 있는 태양광 발전장치의 전기 안전 문제가 대두되고 있다. 낙뢰는 필드 기반 및 전도성 전기 간섭을 유발하기에 이 효과는 케이블 길이 또는 도체 루프 증가와 관련하여 증가한다. 또한 서지는 태양광 모듈, 인버터 및 모니터링장치뿐만 아니라 건물 설비의 장치도 손상하기에 최종적으로는 태양광발전시스템의 화재로 인한 운영 중단과 이에 따른 재정손실을 유발하게 시킬 수 있다. 따라서 본 논문에서는 태양광발전시스템의 낙뢰발생으로 인한 화재 및 전기안전사고 증가로 인하여 재산피해 및 인명피해를 줄일 수 있는 목적으로 태양광발전장치의 낙뢰보호 시스템을 연구하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2147-2150
• /
• 2003

Recently, many technologies of the P.L.C (Power Line Carrier) are introduced for an efficient communication. P.L.C communication sends information in the carrier signals by conduction over the power wire. An arc detector is proposed in this paper for the effective transmission. The Power Line Carrier has an advantage in low cost because it uses existent power line. It can be easily applied anywhere that a power line socket is available. But the P.L.C. is very noisy, because many electronic devices in generate electronic noise in modulated signals. This problem should be considered carefully in the design of the arc detector system using P.L.C in railway. The proposed system can be applied for monitoring the arc detector system and the arc locator system in railway. Hence the system will be able to exchange the arc information to be T.C.M.S. (Train Control Management System), bogies and even between a station and trains in railway and use to suspicion fire in train.

• 한국재난정보학회 논문집
• /
• 제14권1호
• /
• pp.36-42
• /
• 2018

대부분의 재난 상황 관리 시스템의 목표는 재난안전대책본부 지휘자의 정확한 상황 판단을 목표로 하고 있다. 이를 위하여 센서, CCTV, 기상 등으로부터 정보를 실시간으로 수집하고, 현장 담당자로부터 현장 상황 정보를 받아서 판단하는 형태로 구성되어 있다. 그러나 이러한 모델은 현장 담당자의 세부 임무 관리 및 임무 수행 상황에 대한 관리가 부족하여 현장 대응력 부족으로 나타나고 있다. 그러므로 본 연구는 이러한 현장 임무 수행 능력의 관리와 상황 관리를 통합적으로 진행할 수 있는 모델 개발에 초점을 두었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.901-920
• /
• 2015

Wireless Sensor Networks (WSNs) are widely used in geographically isolated applications like military border area monitoring, battle field surveillance, forest fire detection systems, etc. Uninterrupted power supply is not possible in isolated locations and hence sensor nodes live on their own battery power. Localization of sensor nodes in isolated locations is important to identify the location of event for further actions. Existing localization algorithms consume more energy at sensor nodes for computation and communication thereby reduce the lifetime of entire WSNs. Existing approaches also suffer with less localization coverage and localization accuracy. The objective of the proposed work is to increase the lifetime of WSNs while increasing the localization coverage and localization accuracy. A novel intelligent unmanned aerial vehicle anchor node (IUAN) is proposed to reduce the communication cost at sensor nodes during localization. Further, the localization computation cost is reduced at each sensor node by the proposed intelligent arc selection (IAS) algorithm. IUANs construct the location-distance messages (LDMs) for sensor nodes deployed in isolated locations and reach the Control Station (CS). Further, the CS aggregates the LDMs from different IUANs and computes the position of sensor nodes using IAS algorithm. The life time of WSN is analyzed in this paper to prove the efficiency of the proposed localization approach. The proposed localization approach considerably extends the lifetime of WSNs, localization coverage and localization accuracy in isolated environments.

• BMB Reports
• /
• 제43권2호
• /
• pp.110-114
• /
• 2010

The yeast three-hybrid system (Y3H), a powerful method for identifying RNA-binding proteins, still suffers from many false positives, due mostly to RNA-independent interactions. In this study, we attempted to efficiently identify false positives by introducing a tetracycline operator (tetO) motif into the RPR1 promoter of an RNA hybrid expression vector. We successfully developed a tight tetracycline-regulatable RPR1 promoter variant containing a single tetO motif between the transcription start site and the A-box sequence of the RPR1 promoter. Expression from this tetracycline-regulatable RPR1 promoter in the presence of tetracycline-response transcription activator (tTA) was positively controlled by doxycycline (Dox), a derivative of tetracycline. This on-off control runs opposite to the general knowledge that Dox negatively regulates tTA. This positively controlled RPR1 promoter system can therefore efficiently eliminate RNA-independent false positives commonly observed in the Y3H system by directly monitoring RNA hybrid expression.

• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.20-29
• /
• 2007

The engagement control software embedded in the weapon control computer of the fire control center for air defense missile system is large-scale real-time software. The use of typical software development methodologies is not appropriate to develop such large-scale embedded software in terms of reusability, reliability, and productivity for the reason that it is significantly complicated, and highly dependent on hardware platforms and developers. In this paper, a model-based software architecture using components based on UML 2.0 for the engagement control software is presented in order to solve these problems. This software architecture is verified using the black-box test, the scenario-based test, and the Ethernet packet monitoring test methods. The results demonstrate that the developed software architecture can be employed to enhance reusability, maintainability, and productivity of large-scale embedded software.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1931-1936
• /
• 2016

In this paper, we analyzed causes of accidents that recently increased in the illegal and defective LED lamps. They were analyzed by the electrical characteristics calculation and reappearance experiments. The causes of the accidents were analyzed from the circuit affected by the variation of voltage, current and power by harmonics. We drew a conclusion for electrical safety in illegal or degraded LED lamps from the analysis result. The management factors for electrical safety in LED lamps were harmonics, reactive power and power factor. It is possible to secure the electrical safety through monitoring of power factor in failure products and available in smart meters or smart distribution boards.

• Journal of Electrochemical Science and Technology
• /
• 제11권4호
• /
• pp.346-351
• /
• 2020

The removal characteristics of copper (Cu) from electrochemical surface by voltage-activated reaction were reviewed to assess the applicability of electrochemical-mechanical polishing (ECMP) process in three types of electrolytes, such as HNO₃, KNO₃ and NaNO₃. Electrochemical surface conditions such as active, passive, transient and trans-passive states were monitored from its current-voltage (I-V) characteristic curves obtained by linear sweep voltammetry (LSV) method. In addition, the oxidation and reduction process of the Cu surface by repetitive input of positive and negative voltages were evaluated from the I-V curve obtained using the cyclic voltammetry (CV) method. Finally, the X-ray diffraction (XRD) patterns and energy dispersive spectroscopy (EDS) analyses were used to observe the structural surface states of a Cu electrode. The electrochemical analyses proposed in this study will help to accurately control the material removal rate (MRR) from the actual ECMP process because they are a good methodology for predicting optimal electrochemical process parameters such as current density, operating voltage, and operating time before performing the ECMP process.

• 한국안전학회지
• /
• 제29권2호
• /
• pp.12-17
• /
• 2014

This paper is aimed to analyze the characteristics of simultaneous voltage, current and temperature signals for poor connection on electrical connector. In order to attain this purpose, detected were the current and voltage signals on electric wire with series arc, named arc signals, and also monitored were the changes of RMS, instantaneous value of waveform in time domain and temperature value with video. Two states are made normal state over $5kgf{\cdot}cm$ and poor connections state below $0.5kgf{\cdot}cm$ by screw gage. In the voltage signal case, the voltage drop was increased with which the current was increased. In the current signal case, poor connections at the time interval 1~4A all showed "shoulder", as distinct difference from the normal state shown waveform pattern. In the temperature signal case, poor connections are twice at 1A and five times at 4A in the normal state. The temperature continues insulation of electrical wiring and connector can be carbonized. The results of this study will be effectively used in developing the preventive devices and system for electric fire by poor connections.

• Journal of Computing Science and Engineering
• /
• 제2권4호
• /
• pp.412-427
• /
• 2008

We propose ID-exchange protocol for Connectionless Location-Awareness Service (CLAS) to locate mobile nodes in indoor sensor network. When adapting location-awareness service to sensor network, the target system must be designed in accordance with various metrics which reflect the system requirement. We especially consider sustainability of the existing service which has been provided for its original purpose, such as environmental monitoring. The detailed meaning of sustainability here is that, even if location-awareness service is newly added to the existing service, the system must be assured to retain a stable network condition, and to deal with newly caused traffic properly. The CLAS ID-exchange protocol is especially designed for fixture and mobile nodes communication to achieve these properties. The protocol operates on 802.15.4 MAC layer to make mobile node work independently of the procedure to build routing table of fixture node, so a stable routing condition can be achieved even if there are many mobile nodes. Moreover, the dedicated frequency channel is assigned only for this protocol, so that traffic caused by location-awareness service can be distributed to another channel. A real system adapting the protocol was implemented to monitor fire and authorities' positions. We verified the overhead and elapsed time for location-awareness. The result shows the proposed protocol has a high performance in detecting speed, traffic distribution, and stability of overall network.