• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2021

The objective of this work is to prove a possibility of void f illing through a carbonation f or the purpose of improving the quality of recycled aggregate. Carbonation can permanently immobilize CO2, which is a greenhouse gas, and thus provides additional benefit on environment. In this work, recycled fine aggregate was reacted using gaseous CO2 and supercritical CO2(scCO2) in a closed chamber, and the changes in physical properties of the recycled f ine aggregate bef ore and af ter carbonation were analyzed using the apparent density, skeletal density, pH, and FE-SEM measurements. Thereafter, a mortar specimen was prepared and a compressive strength was measured. According to the experimental results, it was found that the increase in the apparent density and the true density was higher by the reaction with scCO2, which was conducted at high temperature and high pressure compared to the reaction with gaseous CO2. In addition, the pH of the eluted water was found to have a larger initial decrease than that observed with samples from reaction by gaseous CO2. The shape and amount of calcium carbonate crystals were also found to be larger than that from gaseous CO2. The increase in compressive strength was the largest when using recycled fine aggregate reacted with scCO2. It was clear that quality improvement of recycled fine aggregate was higher with scCO2 than with gaseous CO2.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.19-28
• /
• 2022

Purpose: One of the methods for preventing disasters such as fire, explosion, and electric shock caused by electricity is to perform grounding. In case of the grounding current includes a frequency component having a high, it is preferable to measure grounding impedance rather than grounding resistance. This study proposes countermeasures to reduce grounding impedance to suppress an ground potential rise due to a grounding current having a frequency component of several kHz or more. Method: General grounding rods and needles-typed grounding rods were buried in the ground, and grounding resistance and grounding impedance were measured, respectively. The characteristics of grounding impedance according to frequency were identified. Result: There was little difference in the measurement results of the grounding resistance between general grounding rods and needles-typed grounding rods. In a frequency range lower than 62.5kHz, there was little difference in the measurement results of the grounding resistance between general grounding rods and needles-typed grounding rods. In a frequency range higher than 62.5kHz, the grounding impedance of needles-typed grounding rods was reduced by about 15% than the grounding impedance of general grounding rods. Conclusion: In the commercial frequency domain, it is effective to connect several grounding rods (common grounding) to lower the grounding resistance value. In the frequency domain of several kHz or more, it is expected that needles-typed grounding rods can effectively reduce the ground potential rise due to the grounding current.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.135-142
• /
• 2022

In this study, lap spliced ultra-high strength reinforced concrete beams were tested and the code criteria for calculating the lap splice length which was affected by the transverse reinforcement and concrete covering performance were reviewed. The main variables for test were set as fiber volume fraction and transverse reinforcing bar arrangement to improve the confining performance of the concrete cover. The change of the confining performance of concrete cover according to the increase in the fiber mixing amount at 1% and 2% volume ratio was examined, and D10 stirrups with a spacing of 100 mm were placed in the lap spliced region. As a result of the test, the specimens confined by the stirrups showed a sudden drop of load bearing capacity with horizontal cracking at the position of tensile longitudinal reinforcement. However, horizontal cracks were not appeared at the location of longitudinal reinforcement for the specimens with steel fiber. And these specimens showed gradual decrease of load bearing capacity after experiencing peak load. In particular, it was found that the strain at the position of the tensile longitudinal reinforcements of the specimens to which the mixing ratio of 2% was applied exceeds the yield strain. As a result of measuring the strain on the concrete surface, it was found that the fiber was more effective in preventing damage to the concrete surface than the stirrups for short lap spliced region.

• Journal of the Korea Society for Simulation
• /
• v.31 no.3
• /
• pp.55-61
• /
• 2022

Currently police and fire departments use a Network/Wifi/GPS based emergency location positioning system established by mobile carriers to directly link with the device of the people who request the rescue to accurately position the expected location in the call area. However in the case of mountain rescue it is difficult to rescue the victim in golden time because the location of the search area cannot be limited when the victim is located in a radio shadow area of the mountain or the device power is off and this situation become worse if victim fail to report 911 by himself due to the injury. In this paper, we are expected to solve the previous problem by propose the mobile telecommunication forensic simulator consist of time series of cell information, human mobility model which include some general and specific features (age, gender, behavioral characteristics of victim, etc.) and intelligent infer system. The results of analysis appear in heatmap of polygons on the map based on the probability of the expected location information of the victim. With this technology we are expected to contribute to rapid and accurate lifesaving by reducing the search area of rescue team.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.83-93
• /
• 2021

Objectives: 'Confined space' was only defined in the Safety and Health Regulations as a place where oxygen deficiency and hydrogen sulfide must be dealt with at the time of the initial enactment (1982). The danger of fire and explosion were added in 2003. We will compare and review the regulations related to confined space work under the current safety and health rules alongside regulations in other countries and prepare a plan to improve the system through enhanced clarity and execution. Methods: In a comparison of systems for the prevention of suffocation in confined spaces in major countries (Germany, United States, Japan) different concepts of the definition of confined spaces in different countries apparently due to differences in each country's legal implementation system, accident analysis methods, the status of safety and health implementation in workplaces, the precautions against actual confined space work, and the definition of confined spaces were found to be not much different between Korea and the other foreign countries. Results: In the case of Germany and the United States, a confined space is defined as a contextual concept rather than a place, so more careful attention is needed from operators or enclosed space managers as it is often necessary to judge the actual workplace. In the case of Korea and Japan, the interior of the place is mainly defined as a place, especially in the case of Japan, which concentrates on oxygen deficiency and hydrogen sulfide poisoning. Conclusions: For measures to improve regulations on the prevention of suffocation accidents in Korea, I would like to propose three major measures to improve the system in the rules on domestic industrial safety and health standards. It is necessary to prepare and provide a guide to ensure that the 18 types of confined spaces currently defined as confined spaces are clearly understood by field management supervisors or workers.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.69-83
• /
• 2023

Forest fires increase the risk of subsequent soil erosion and mass movement in burned areas, even under rainfall conditions below landslide alert thresholds, by destroying plants and vegetation and causing changes to soil properties. These effects of forest fires can alter runoff in burned areas by altering soil composition, component minerals, soil water repellency, soil mass stability, and soil fabric. Heat from forest fires not only burns shallow organic matter and plants but also spreads below the surface, affecting soil constituents including minerals. This study analyzed X-ray diffraction and physical properties of topsoil and subsoil obtained from both burned and non-burned areas to identify the composition and distribution of clay minerals in the soil. Small amounts of mullite, analcite, and hematite were identified in burned soils. Vermiculite and mixed-layer illite/vermiculite (I/V) were found in topsoil samples from burned areas but not in those from non-burned areas. These findings show changes in soil mineral composition caused by forest fires. Expansive clay minerals increase the volume of soil during rainfall, degrading the structural stability of slopes. Clay minerals generated in soil in burned areas are therefore likely to affect the long-term stability of slopes in mountainous areas.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.104-108
• /
• 2023

Because of recent expansion of the electric car market. it is highly growing that should be supplemented its performance and safely issue. The EMI problem due to the interlocking of electrical components that causes various safety problems such as fire in electric vehicles is emerging every time. We strive to achieve optimal charging efficiency by combining various technologies and reduce radioactive noise among the EMI noise of a weirless charging control module, one of the important parts of an electric vehicle was designed and tested. In order to analyze the EMI problems occurring in the wireless charging control module, the optimized wireless charging control module by applying the optimization design technology by learning the accumulated test data for critical factors by utilizing the Python-based script function in the Ansys simulation tool. It showed an EMI noise improvement effect of 25 dBu V/m compared to the charge control module. These results not only contribute to the development of a more stable and reliable weirless charging function in electric vehicles, but also increase the usability and efficiency of electric vehicles. This allows electric vehicles to be more usable and efficient, making them an environmentally friendly alternative.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.2
• /
• pp.199-209
• /
• 2023

This study is a descriptive research to identify the factors that influence blood donation intentions of the middle-aged firefighters and prison officer based on Ajzen's (1991) planned behavior theory. The subjects of the study were 223 middle-aged firefighters and prison officer at a fire station and prison located in G City and District B. The Data were analyzed by descriptive statistics and t-test, one-way ANOVA, Pearson's correlation coefficient, Turkey, and multiple regression with the SPSS 21.0 program. There were statistically significant differences in blood donation intention according to the blood donation experience, attempted blood donation within a year, participate plan in blood donation within 3 months. The blood donation intention of middle aged showed significant positive correlations with attitude, subjective norms, and perceived behavioral control towards blood donation. Multiple regression analysis for blood donation intention revealed that the significant predictors were participate plan in blood donation within 3 months, perceived behavior control, subjective norms, attitude towards blood donation, and attempted blood donation within a year. These factors explained 69% of the variance. In order to enhance the middle aged's intention to blood donation, we need a program that can improve middle aged's attitude, subjective norms, perceived behavior control.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.2
• /
• pp.1-13
• /
• 2023

As interest in urban safety has increased since COVID-19, various institutions have developed and used indicators that evaluate the safety city model. Yongsan-gu was ranked No. 1 in 2021 by Social Safety Index evaluation and was selected as the safest city in Korea. However, the Itaewon disaster in Yongsan-gu in 2022 caused many casualties. The study of indicators for evaluating cities' safety was necessary. This study aims to examine domestic and foreign safe city models and review the differences between each model and the indicators used to evaluate safe cities. As a result of collecting 11 safe city models and analyzing each evaluation index, safe city models can be classified into program-based safe city models, such as the World Health Organization's International safe community and the UN Office for Disaster Risk Reduction's International Safe city. Considering the diversification of threats to safety, it is reasonable to comprehensively consider digital security, health safety, infrastructure safety, personal safety, environmental safety, traffic safety, fire safety, crime safety, life safety, suicide, and infectious diseases when evaluating safe cities as evaluation parameters.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.410-418
• /
• 2023

Recently, advancements and commercialization in the field of maritime autonomous surface ships (MASS) has rapidly progressed. Concurrently, studies are also underway to develop methods for automatically surveying the condition of various on-board equipment remotely to ensure the navigational safety of MASS. One key issue that has gained prominence is the method to obtain values from analog gauges installed in various equipment through image processing. This approach has the advantage of enabling the non-contact detection of gauge values without modifying or changing already installed or planned equipment, eliminating the need for type approval changes from shipping classifications. The objective of this study was to identify a dynamically changing indicator needle within noisy images of analog gauges. The needle object must be identified because its position significantly affects the accurate reading of gauge values. An analog pressure gauge attached to an emergency fire pump model was used for image capture to identify the needle object. The acquired images were pre-processed through Gaussian filtering, thresholding, and morphological operations. The needle object was then identified through Hough Transform. The experimental results confirmed that the center and object of the indicator needle could be identified in images of noisy analog gauges. The findings suggest that the image processing method applied in this study can be utilized for shape identification in analog gauges installed on ships. This study is expected to be applicable as an image processing method for the automatic remote survey of MASS.