• International Journal of High-Rise Buildings
• /
• v.12 no.3
• /
• pp.225-234
• /
• 2023

Even at this point in the era of digital transformation, we are still facing many problems in the safety sector that cannot prevent the occurrence or spread of human casualties. When you are in an unexpected emergency, it is often difficult to respond only with human physical ability. Human casualties continue to occur at construction sites, manufacturing plants, and multi-use facilities used by many people in everyday life. If you encounter a situation where normal judgment is impossible in the event of an emergency at a life site where there are still many safety blind spots, it is difficult to cope with the existing manual guidance method. New variable guidance technology, which combines artificial intelligence and digital twin, can make it possible to prevent casualties by processing large amounts of data needed to derive appropriate countermeasures in real time beyond identifying what safety accidents occurred in unexpected crisis situations. When a simple control method that divides and monitors several CCTVs is digitally converted and combined with artificial intelligence and 3D digital twin control technology, intelligence augmentation (IA) effect can be achieved that strengthens the safety decision-making ability required in real time. With the enforcement of the Serious Disaster Enterprise Punishment Act, the importance of distributing a smart location guidance system that urgently solves the decision-making delay that occurs in safety accidents at various industrial sites and strengthens the real-time decision-making ability of field workers and managers is highlighted. The smart location guidance system that combines artificial intelligence and digital twin consists of AIoT HW equipment, wireless communication NW equipment, and intelligent SW platform. The intelligent SW platform consists of Builder that supports digital twin modeling, Watch that meets real-time control based on synchronization between real objects and digital twin models, and Simulator that supports the development and verification of various safety management scenarios using intelligent agents. The smart location guidance system provides on-site monitoring using IoT equipment, CCTV-linked intelligent image analysis, intelligent operating procedures that support workflow modeling to immediately reflect the needs of the site, situational location guidance, and digital twin virtual fencing access control technology. This paper examines the limitations of traditional fixed passive guidance methods, analyzes global technology development trends to overcome them, identifies the digital transformation properties required to switch to intelligent variable smart location guidance methods, explains the characteristics and components of AI-based public facility smart fire safety integrated system (ISFS).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.12
• /
• pp.715-732
• /
• 2009

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2008. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends in thermal and fluid engineering have been surveyed in the categories of general fluid flow, fluid machinery and piping, new and renewable energy, and fire. Well-developed CFD technologies were widely applied in developing facilities and their systems. New research topics include fire, fuel cell, and solar energy. Research was mainly focused on flow distribution and optimization in the fields of fluid machinery and piping. Topics related to the development of fans and compressors had been popular, but were no longer investigated widely. Research papers on micro heat exchangers using nanofluids and micro pumps were also not presented during this period. There were some studies on thermal reliability and performance in the fields of new and renewable energy. Numerical simulations of smoke ventilation and the spread of fire were the main topics in the field of fire. (2) Research works on heat transfer presented in 2008 have been reviewed in the categories of heat transfer characteristics, industrial heat exchangers, and ground heat exchangers. Research on heat transfer characteristics included thermal transport in cryogenic vessels, dish solar collectors, radiative thermal reflectors, variable conductance heat pipes, and flow condensation and evaporation of refrigerants. In the area of industrial heat exchangers, examined are research on micro-channel plate heat exchangers, liquid cooled cold plates, fin-tube heat exchangers, and frost behavior of heat exchanger fins. Measurements on ground thermal conductivity and on the thermal diffusion characteristics of ground heat exchangers were reported. (3) In the field of refrigeration, many studies were presented on simultaneous heating and cooling heat pump systems. Switching between various operation modes and optimizing the refrigerant charge were considered in this research. Studies of heat pump systems using unutilized energy sources such as sewage water and river water were reported. Evaporative cooling was studied both theoretically and experimentally as a potential alternative to the conventional methods. (4) Research papers on building facilities have been reviewed and divided into studies on heat and cold sources, air conditioning and air cleaning, ventilation, automatic control of heat sources with piping systems, and sound reduction in hydraulic turbine dynamo rooms. In particular, considered were efficient and effective uses of energy resulting in reduced environmental pollution and operating costs. (5) In the field of building environments, many studies focused on health and comfort. Ventilation. system performance was considered to be important in improving indoor air conditions. Due to high oil prices, various tests were planned to examine building energy consumption and to cut life cycle costs.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.1
• /
• pp.1-4
• /
• 2009

Objective: To report an unsuspected adaptive plasticity of single upper motor neurons and of primary motor cortex found after microsurgical connection of the spinal cord with peripheral nerve via grafts in paraplegics and focussed discussion of the reviewed literature. Methods: The research aimed at making paraplegics walk again, after 20 years of experimental surgery in animals. Amongst other things, animal experiments demonstrated the alteration of the motor endplates receptors from cholinergic to glutamatergic induced by connection with upper motor neurons. The same paradigm was successfully performed in paraplegic humans. The nerve grafts were put into the ventral-lateral spinal tract randomly, with out possibility of choosing the axons coming from different areas of the motor cortex. Results: The patient became able to selectively activate the re-innervated muscles she wanted without concurrent activities of other muscles connected with the same cortical areas. Conclusion: Authors believe that unlike in nerve or tendon transfers, where the whole cortical area corresponding to the transfer changes its function a phenomenon that we call "brain plasticity by areas". in our paradigm due to the direct connection of upper motor neurons with different peripheral nerves and muscles via nerve grafts motor learning occurs based on adaptive neuronal plasticity so that simultaneous contractions of other muscles are prevented. We propose to call it adaptive functional "plasticity by single neurons". We speculate that this phenomenon is due to the simultaneous activation of neurons spread in different cortical areas for a given specific movement, whilst the other neurons of the same areas connected with peripheral nerves of different muscles are not activated at the same time. Why different neurons of the same area fire at different times according to different voluntary demands remains to be discovered. We are committed to solve this enigma hereafter.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.83-89
• /
• 2013

Energy industry facilities can cause fatal damage for internal industry employee as well as external general people because handling various kinds of gas and harmful substance might be spread to large scale severe accident by fire, explosion, and toxic gas leakage. In order to prevent these accidents, quantification by damage effect on structure and human is tried by using quantitative risk assessment, but it is difficult to process instantly exceptional cases and requires knowledge of expert. This paper aims to minimize exceptional cases and knowledge of expert, and present risk with human perceptible. So, we designed and developed zone-base risk analysis system that can compute risk of zone in real time at that point using database and incremental model.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.261-267
• /
• 2020

This study used a real-scale model experiment to reproduce internal fires in residential buildings such as a multi-dwelling unit, in order to prevent damage caused by tens of thousands of fires witnessed each year and to take measures to cope with them. For experimental conditions, different opening sizes were applied to measure and analyze the heating temperature of the exterior wall. Results drawn are as following: when the experiment was conducted with opening sizes(horizontal length) each at 2,000mm, 1,600mm, and 1,400mm, the flashover occurred at 630 seconds, 505 seconds and 510 seconds, respectively. Also, the total heating time, in proportion to this, came to 815 seconds, 713 seconds and 721 seconds. The maximum heating temperature of the exterior wall by the opening size reached 282.4℃ at 2,000mm, 382.9℃ at 1,600mm, and 423.8℃ at 1,400mm. This represented that as the opening size gets smaller, the heating temperature of the exterior wall by fire spread becomes higher.

• The Journal of Korean Medical History
• /
• v.27 no.2
• /
• pp.99-120
• /
• 2014

Purpose : There are two types of sleep disturbance: inability to sleep (不眠) and somnolence (多眠). This study is to examine treatments of the two types of sleep disturbance in the Books of Cold Damage and how those theories were established and formed. Methods : 1. Verses including the words related to inability to sleep and somnolence were extracted from "Treatise on Cold Damage Diseases" (傷寒論). 2. Among the Books on Cold Damages that are classified according to the symptoms, 17 books with contents related to inability to sleep and somnolence were selected to collect and classify data in three perspectives: mechanism of disease (病機), method of treatment (治法) and disease pattern (病證). 3. Data collected through the above methods were compared and diagramed. Results & Conclusions : 1. On Cold Damage, inability to sleep is mostly rooted when human body lacks yin energy while having excessive yang energy (陽盛陰虛) due to fire and heat (火熱). The reason could be misuse of perspiration inducing method (汗法) or purgation (下法) on the doctors' part. 2. On Cold Damage, somnolence is rooted when pathogen (邪氣) is spread to yin meridians (陰經) and the human body lacks yang while having excessive yin energy (陰盛陽虛) or when heat (熱邪) is invaded into interior parts (裏部). 3. Many scholars of Cold Damage in later periods had copied the "Treatise on Cold Damage Diseases" for treatments of sleep disturbance but many others have applied the verses from "Treatise on Cold Damage Diseases" or added new treatments. Do jeol-am (陶節庵) and Wang Geung-dang (王肯堂) particularly had deep understanding on "Treatise on Cold Damage Diseases" and utilized the content freely or suggested new remedies because they had thorough knowledge on relating formula as well.

• Korean Journal of Oriental Medicine
• /
• v.16 no.3
• /
• pp.23-32
• /
• 2010

Background : There has been increased global interest in traditional medicine. Ayurveda and Korean medicines are most world-widely spread as Complementary and Alternative Medicine(CAM). Objectives : This review gives an overview of basic principles and commonalities of Ayurveda, Tibetan and Korean medicine. Method : I have summarized the results of the research into the following categories: basic theoies, history, physiology and pathogenesis. Result : 1. Ayurveda is the medical science that grasps individual constitution through Tridosha, a combination of five primary elements(space, wind, fire, water, and earth), and systematically explains physiological and pathological phenomena which reveal according to the constitution. 2. The theoretical basis forming the Tibetan Medicine is the substance of phlegm, bile, and wind each of which is divided into five kinds. These physiological substances can be transformed into pathological factors when certain environment is formed. 3. Ayurveda, Tibetan and Korean medicine, three main axes of the traditional medicine arouse western medical researchers' interest by their peculiar views of the disease and the system of their medical theories. And they are expected to render services to human health. Conclusions : We can expect the potential of the approaching between Ayurveda, Tibetan and Korean medicine.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.1015-1025
• /
• 2010

In this present study, we experimentally investigated the effects of electric fields on the characteristics of flames spreading over electric-wires with AC fields. The dependence of the rate at which a flame spreads over polyethylene-insulated wires on the frequency and amplitude of the applied AC electric field was examined. The spreading of the flame can be categorized into linear spreading and non-linearly accelerated spreading of flame. This categorization is based on the axial distribution of the field strength of the applied electric field. The rate at which the flame spreads is highly dependent on the inclined direction of the wire fire. It could be possible to explain the spreading of the flame on the basis of thermal balance.

• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.117-121
• /
• 2016

Background: Definition and grouping of initiating events (IEs) are important basics for probabilistic safety assessment (PSA). An IE in a spent fuel reprocessing plant (SFRP) is an event that probably leads to the release of dangerous material to jeopardize workers, public and environment. The main difference between SFRPs and nuclear power plants (NPPs) is that hazard materials spread diffusely in a SFRP and radioactive material is just one kind of hazard material. Materials and Methods: Since the research on IEs for NPPs is in-depth around the world, there are several general methods to identify IEs: reference of lists in existence, review of experience feedback, qualitative analysis method, and deductive analysis method. While failure mode and effect analysis (FMEA) is an important qualitative analysis method, master logic diagram (MLD) method is the deductive analysis method. IE identification in SFRPs should be consulted with the experience of NPPs, however the differences between SFRPs and NPPs should be considered seriously. Results and Discussion: The plutonium uranium reduction extraction (Purex) process is adopted by the technics in a model reprocessing plant. The first extraction cycle (FEC) is the pivotal process in the Purex process. Whether the FEC can function safely and steadily would directly influence the production process of the whole plant-production quality. Important facilities of the FEC are installed in the equipment cells (ECs). In this work, IEs in the FEC process were identified and categorized by FMEA and MLD two methods, based on the fact that ECs are containments in the plant. Conclusion: The results show that only two ECs in the FEC do not need to be concerned particularly with safety problems, and criticality, fire and red oil explosion are IEs which should be emphatically analyzed. The results are accordant with the references.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.166-175
• /
• 2017

Hazardous volcanic activity will continue to occur in the ring of fire, a major area in the basin of the Pacific Ocean where a large number of earthquakes and volcanic eruptions occur. and, because of rising populations, development pressures, and expanding national and international air traffic over volcanic regions, risks to life and property through exposure to volcano hazards continue to increase. During an eruption, volcanic contamination can reach and exceed the cruising altitudes of turbine-powered aircraft, among others, within minutes and spread over vast geographical areas within a few days. Volcanic ash can affect the operation of aircraft at aerodromes. Volcanic ash deposition at an aerodrome, even in very small amounts, can result in the closure of the aerodrome until all the deposited ash has been removed. In this study, air traffic information framework is presented along with algorithms to define affected routes, waypoints and airports using GIS geometry analysis.