• 제목/요약/키워드: Fire Scenario

검색결과 240건 처리시간 0.026초

아날로그 주소형 감지기와 자동화재탐지 시스템의 설계 및 구현사례에 대한 고찰 (A Study on Design and Implementation of an Analog Addressable Detector and a Fire Alarm System)

  • 김종태;홍세권;유영신;정해성
    • 한국화재소방학회논문지
    • /
    • 제24권4호
    • /
    • pp.1-11
    • /
    • 2010
  • 본 논문은 최근의 정보통신기술을 적용하여 아날로그 감지기와 화재경보시스템의 설계와 구현방법에 대한 사례를 기술하였다. 근거리와 원거리뿐만 아니라 중대형 규모의 건물에 설치할 수 있도록 감지기에서 부터 시스템까지 계층구조로 설계하였고, 대량의 이벤트를 효율적으로 처리하여 많은 정보를 보여주도록 통신프로토콜부터 응용프로그램까지 일관되게 설계하였다. PC 기반의 화재경보시스템은 Microprocessor 기반의 해외 제품보다 고속으로 대용량을 처리하고 큰 화면에 많은 정보를 제공한다. 그러므로 수천 개의 아날로그 감지기를 설치하는 대형건물도 하나의 시스템에 쉽게 수용할 수 있고 다중화장치를 이용하여 설치비용도 크게 절약할 수 있다. 본 시스템에서 구현된 경보시나리오는 경보가 발생할 때 비화재와 실화재를 구분하는데 큰 역할을 할 것으로 판단된다.

지하주차장 화재 시 스프링클러헤드 작동 여부에 따른 천장 위 단열재의 발화 여부 (Ignition of ceiling insulation depending on working condition of Sprinkler head in underground parking lot fire)

  • 김서영;공하성
    • 문화기술의 융합
    • /
    • 제8권1호
    • /
    • pp.461-468
    • /
    • 2022
  • 이 논문에서는 지하주차장 화재 시 스프링클러 작동 여부에 따른 천장 위 단열재의 착화 여부에 관해 연구하였다. 스프링클러 작동 여부에 따라 동일 지점의 온도변화를 측정할 경우 시나리오 1에서는 화재와 인접한 천장부의 뿜칠재(SP-2)와 천장 단열재(발포 폴리스티렌)의 경계지점의 화재 내부온도는 658.27 ℃로 분석되었으며, 천장 단열재(발포 폴리시티렌)의 발화점인 427 ℃보다 최대 내부온도가 높아 화염이 천장 단열재에 착화되어 화재가 확산하는 것으로 나타났다. 시나리오 2에서는 화재와 인접한 천장부의 뿜칠재(SP-2)와 천장 단열재(발포 폴리스티렌)의 경계지점의 화재 내부온도는 53.10 ℃로 분석되었으며 뿜칠재(SP-2)와 천장 단열재 (발포 폴리스티렌)의 경계지점 최대 내부온도가 발화점 이하가 되어 화염이 천장 단열재에 착화되지 않았다. 이로 인해 스프링클러 작동 여부에 따라 천장 단열재의 점화 가능성을 예측할 수 있었다.

스프링클러 반응시간 예측에 대한 화재모델의 비교 (A Comparison of the Prediction of Sprinkler Response Time Applying Fire Models)

  • 김종훈;김운형;이수경
    • 한국화재소방학회논문지
    • /
    • 제15권2호
    • /
    • pp.46-52
    • /
    • 2001
  • To evaluate the usability of compartment fire models for predicting sprinkler response time, fire experiment was conducted and measured sprinkler response time. The experimental data was compared with zone model "FASTLite"and field model "FDS"and field Model "SMARTFIRE" A Compartment fire conducted in a 2.4 m by 3.6 m by 2.4 m ISO 9705 room and measured H.R.R was approximately 100.3 kW. In test, Sprinkler activation temperature used is $72^{\circ}c$ and responded at 198s. The output of FASTLite, SMARTFIRE and, FDS for this fire scenario were 209s, 183s, and 192s, respectively. As a results, prediction using FDS model approached to that of test very closely and other models showed good approximated results also.

  • PDF

NEW TREND OF FIRE SCIENCE AND EIRE PROTECTION TECHNOLOGY

  • Sugahara, Shinichi
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
    • /
    • pp.19-26
    • /
    • 1997
  • Firesafety design engineerings have been mainly derived from complicated rearrangement of descriptive specifications in codes or regulations through a great number of lessons from fire disasters. In this paper, the author refers to some recent developments in the field of building fire protection. At first, the author expresses his viewpoints concerning performance-based design codes, which have been popular throughout the world as a symbol of freedom from restricted usage of building materials and components prescrived in regulation or bylaws, in spite of some conflicts between objects-oriented design method and industrial mass production. Secondly, the author introduces several innovative fire protection methods adopted for large or void spaces in building complex. Finally, the author forcasts a next development of firesafety science and technology, aimed at securing personal safety in hyperscale urban areas.

  • PDF

Application of reinforcement learning to fire suppression system of an autonomous ship in irregular waves

  • Lee, Eun-Joo;Ruy, Won-Sun;Seo, Jeonghwa
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제12권1호
    • /
    • pp.910-917
    • /
    • 2020
  • In fire suppression, continuous delivery of water or foam to the fire source is essential. The present study concerns fire suppression in a ship under sea condition, by introducing reinforcement learning technique to aiming of fire extinguishing nozzle, which works in a ship compartment with six degrees of freedom movement by irregular waves. The physical modeling of the water jet and compartment motion was provided using Unity 3D engine. In the reinforcement learning, the change of the nozzle angle during the scenario was set as the action, while the reward is proportional to the ratio of the water particle delivered to the fire source area. The optimal control of nozzle aiming for continuous delivery of water jet could be derived. Various algorithms of reinforcement learning were tested to select the optimal one, the proximal policy optimization.

국내 성능설계에서 선정된 설계화재의 적정성 연구 (A Study on the Appropriateness of Design Fire Size Determining for Performance Based Design in Korea)

  • 이세명
    • 한국화재소방학회논문지
    • /
    • 제28권4호
    • /
    • pp.50-56
    • /
    • 2014
  • 성능설계 시험 안을 작성하기 위해서는 건축물에 발생할 수 있는 화재의 크기를 정량화하는 단계가 선행되어야 한다. 이러한 설계화재의 크기가 적합하게 선정되었을 때 화재로부터 안전하면서도 경제적인 설계가 가능하다. 우리나라는 성능설계의 역사가 짧고 공학적 자료가 축적되어 있지 않아 화재의 크기를 선정하는 데에 많은 문제점을 드러내고 있다. 이에, 해외의 설계화재 가이드라인과 국내의 실 화재 실험 자료를 조사하였다. 그리고 국내의 설계화재 선정 사례를 조사하여 그 적정성을 분석하고 건축물의 용도별로 설계화재의 가이드라인을 제안하였다.

실규모 실험에 의한 고체가연물의 화재특성 연구 (A Study on Fire Characteristics of Solid Combustible Materials Based on Real Scale Fire Test)

  • 김성찬
    • 한국화재소방학회논문지
    • /
    • 제25권5호
    • /
    • pp.62-68
    • /
    • 2011
  • 본 연구는 고체가연물의 초기 점화 및 화재성장과정에서의 발열량을 정량적으로 측정하고 가연물에 따른 화재성장특성 파악하고자 한다. 실험에 적용된 고체가연물은 단일/이중 목재크립, 단일/이중 쿠션, 카페트/목재크립이며 화재발달 단계에서 화재성장특성을 시간 제곱 화재성장 시나리오와 비교분석하고 고체가 연물의 화재성장 계수를 정량화 하였다. 고체가연물의 연소과정에서 소모되는 연료의 질량과 방출되는 총열에너지 개념을 이용하여 가연물의 평균 유효연소율을 평가하였으며 환기 및 화재조건의 영향을 분석하여 화재해석시 화재시나리오를 설정하는데 있어서 실질적인 정보를 제공하고자 한다.

국내 원자력발전소의 주제어실 화재 피난 리스크 평가를 위한 화재 시뮬레이션 (Fire Simulations for the Abandonment Risk Assessment of Main Control Room Fire in Domestic Nuclear Power Plant)

  • 강대일;김길유;장승철;유성연
    • 한국안전학회지
    • /
    • 제29권4호
    • /
    • pp.199-207
    • /
    • 2014
  • In this paper, to systematically assess the abandonment risk of main control room (MCR) fire, fire simulations with Fire Dynamics Simulator were performed and abandonment probabilities were estimated for the MCR bench-board fire of domestic reference nuclear power plant. The fire simulation scenarios performed in this study included propagating and non-propagating fires of the MCR bench-board, and the availability and unavailability of heating, ventilation, and air conditioning system (HVACS). The following results were obtained. First, temperature was the major abandonment impact factor for the MCR bench-board fire if the HVACS was available and optical density was that if the HVACS was unavailable. Second, the fire scenario contributing the MCR bench-board fire abandonment risk was identified to be only the propagating fire. Third, it was confirmed that the abandonment probability of the MCR bench-board fire for domestic reference nuclear power plant could be reduced by using the fire modeling.

환기가 제한된 두 개 격실 화재에서 FDS 검증분석 (Validation of FDS for Fire in Underventilated Condition with Two rooms)

  • 배용범;금오현;김윤일;류수현;김위경;박종석
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2008년도 추계학술논문발표회 논문집
    • /
    • pp.438-443
    • /
    • 2008
  • Fire model shall be verified and validated to reliably show the predictive capabilities for a specific use. In the process of model verification and validation, both the acceptable uses and limitation of fire model are established. In this study, the results of FDS simulation are compared with the data of PRISME experiment such as temperature, heat release rate, heat flux, product concentrations in the under-ventilated two-room condition. Furthermore, the sensitivity of FDS under ventilation condition changes are evaluated. FDS provide the reliable prediction for under-ventilated two-room fire scenario with slightly deviation.

  • PDF

국내 PBD 기술의 정립을 위한 해외 성능적 피난안전설계사례에 관한 조사 (A Study on PBD case of Evacuation in Japan for PBD Approach of Korea.)

  • 김동은;서동구;권영진
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2008년도 추계학술논문발표회 논문집
    • /
    • pp.322-327
    • /
    • 2008
  • Fire safety provisions have to be determined through Performance -based design in many project. There is a need for quick estimation of evacuation time for scenario analysis in hazard assessment. The key equations on estimating evacuation time have to be known. In Japan There are many experience of PBD according to the Architectural law. It is the aim of this study to investigate the PBD case of Evacuation in Japan for PBD Approach of Korea.

  • PDF