• 동의생리병리학회지
• /
• 제20권1호
• /
• pp.229-234
• /
• 2006

To develop the Korean standard differentiation of the symptoms and signs for the stroke(KSDS), the committee on Stroke Diagnosis Standardization of traditional Korean medicine(TKM) was organized dy nineteen experts in college of Korean medicine. On July 9th 2005, the second consultation meeting was held in Daejeon, Korea. Fifteen experts of the committee attended the meeting and they discussed the KSDS and came to a consensus. The 15-member committee consensus was as follows: First, board members defined the stroke on the basis of TKM. Second, they divided the symptoms and signs of stroke into five categories- fire and heat, dampness and phlegm, blood stasis, qi deficiency, yin deficiency. Third, the symptom indicator of each differentiation type for the stroke was recommended. KSDS-1 will be applied to the clinical practice and revised.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.32-40
• /
• 2019

During the manufacturing process of a printed circuit board(PCB), fumes and mists are generated as the ink dries on the PCB surface. The generated fumes and mists are deposited in the dryer wall and the exhaust duct. Deposited fumes and mists may present a fire hazard if the dryer temperature control system fails. In this study, the thermal stability of the fumes and mists deposited in the dryer and ducts has been analyzed by experimental methods such as thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), auto ignition temperature (AIT), and multiple mode calorimetry(MMC). According to the experimental analyses, experimental samples are likely to generate gas at the temperature ($180{\sim}240^{\circ}C$) that deviates from the normal operating temperature ($150{\sim}156^{\circ}C$). It has been shown that the thermal stability is degraded when the temperature is deviated from the normal operating temperature. In the end, engineering and management safety measures of accidental prevention have been suggested.

• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.639-654
• /
• 2016

건축 재료별 연소가스에 따른 인체 유해성 평가에 관한 본 연구는 SEM, FTIR와 콘칼로리미터를 이용하여 목재류인 MDF와 나왕방부목 2종과 화학물질인 난연 스티로폼, 스티로폼, 우레탄폼 및 석고보드 4종의 플라스틱류 각각의 재료별 연소가스 분석을 하였다. 분석결과, MDF는 연소된 부분의 나무구조와 접착제가 혼합되어 균일하게 연소되었고 나왕방부목은 난연 약제가 깊숙이 침투하여 높은 열에도 목재의 형태를 일정하게 유지하였다. 난연 스티로폼은 불이 붙지 않고 녹아내렸는데 무기계 난연제 때문으로 사료되고 석고보드는 형태는 유지했으나 열에 취약함을 확인하였다. MDF에서 암모니아($NH_3$)치사농도(750 ppm)대비 795 ppm, 나왕방부목은 이산화탄소($CO_2$)가 256,965 ppm으로 치사농도(100,000 ppm)의 2.5배 초과하였고, 우레탄에서 염화수소(HCl)의 치사농도(500 ppm)를 초과하는 697 ppm, 또한 우레탄에서 이산화질소($NO_2$) 치사농도(250 ppm)를 크게 초과하는 434 ppm과 난연 스티로폼 398 ppm이 방출되었다. 대부분의 재료에서 인체에 매우 유해한 가스가 방출됨을 확인하였고, 본 연구결과는 향후 건축 재료별 인체 유해성을 평가하는 기초데이터로 활용하고자 한다.

• 한국응급구조학회지
• /
• 제12권3호
• /
• pp.55-69
• /
• 2008

Purpose : The purpose of this study was to analyze the prehospital care report prepared by EMS squads of 119 center in Gyeonggi area and to identify the status of prehospital care activities, problems and improvement possibilities of the emergency care. Method : Five hundred copies of prehospital care report prepared by EMS squads in thirty-eight 119 centers under 18 fire stations in Gyeonggi area from March to April in 2008 were randomly chosen for the analysis. Data abstracted according to the purpose of the study were input and the analysis of prehospital care activities were performed using SPSS-WIN(ver. 16) statistics package. Results : 1. Total 500 cases of prehospital emergency care activities were reviewed. By sex, females were 219 (43.8%) and males were 281 (56.2%). The places of reporting were home (57.8%). According to the type of emergency, 281 cases (56.2%) were caused by disease and 291 (43.8%) were from other causes such as traffic accidents or incidental injuries. 2 The average time needed for the 119 EMS squad to arrive at the scene after being reported was 7.29 minutes. The time used at the scene for the emergency care was 7.3 minutes in average and the time to arrive at the hospital was 25.4 minutes in average. 3. In patient evaluation, in 68% of the cases more than two vital signs were measured at one time and emergency patients were 31%, and non-emergency patients were 69%. 4. In one EMS activity, average 2.15 cases of emergency care were provided to a patient. The cases where two kinds of emergency care were given were 14.4%, which is the most frequent cases. When reviewing the details of the emergency cares given to the patient including multiple cares, trivial cards (taking it easy and giving comfort) were the most frequent one as 40.6% and the medical direction of the doctor was given in only one case out of 500 cases. 5. In patient evaluation and emergency care, vital signs were provided to emergency patients at significantly higher rate comparing to the non-emergency patients. The number of emergency care performance was significantly higher in emergency cases. In emergency dispatch, the cases that EMT (1st class) was on board was 86.2%. When comparing the cases when the 1st class EMT was on board and otherwise, the cases with the presence of 1st class EMT showed more vital signs were detected but there was no significant difference in the number of emergency cares provided. Conclusion : It seemed that the on-scene emergency care did not satisfy the expectations. So it is necessary to enforce the cooperation between the elements, the qualifications of the 119 EMS squads and to improve the prehospital working environment in order to provide the better medical service at any time.

• 헤리티지:역사와 과학
• /
• 제56권3호
• /
• pp.118-135
• /
• 2023

조선왕실의 현판은 궁궐, 종묘 등 왕실과 관련된 건물에 걸어 건물의 위계와 성격을 나타낸다. 현판은 조선왕실 의궤에 제작 방법이나 재료 등을 기록하고 있어 당시 제작기술이나 재료 변화를 연구하는데 중요한 자료이다. 그러나 현재 남아 있는 현판은 전각의 화재나 전란 등으로 여러 차례 개·보수 되면서 원형과 재료가 변화되었다고 추정된다. 조선왕실의 현판은 어제·어필 현판이 많아 검은색 바탕에 금색 글자로 이루어진 형태가 주요하다. 본 연구는 조선왕실 현판 중 금색 글자로 추정되는 44점을 대상으로 글자에 남아 있는 안료를 분석하였다. 분석 결과를 바탕으로 글자 표면에 남아 있는 금색 안료의 현재 상태와 검출된 구성성분에 따라 분류하였다. 글자 안료의 분석 결과 금(Au) 성분이 주요하게 검출된 현판은 양각 24점과 음각 5점이며, 양각 15점은 황동(Cu, Zn) 성분이 주요하게 검출되었다. 황동 성분이 검출된 현판 중 일부는 금색 안료가 아닌 청록색 안료만 남아 있는 상태이다. 황동 안료는 문헌에 기록이 없고 현재 단청 안료로 사용하고 있지 않아 황동 안료의 적용 가능성을 알아보기 위해 재현실험을 실시하였다. 재현실험은 재료의 한계로 황동안료의 적용 유무와 사용 방법을 확인하기 어려웠으나 앞으로 황동 안료의 사용 시기와 방법에 대한 연구가 필요한 것으로 판단된다.

• 한국화재소방학회논문지
• /
• 제28권4호
• /
• pp.81-88
• /
• 2014

본 연구는 119구급대원의 근골격계 증상 호소율을 파악하고 증상 유소견자들에 대한 작업성 근골격계질환(WMSDs)을 유발하는 환자운반 작업에 대한 인간공학적 평가를 통해 작업 위험도를 파악하고자 하였다. 이를 위해 근골격계 유해요인 조사지침(KOSHA Code H-30-2008)을 활용한 설문도구를 이용하여 근골격계 증상 호소율을 파악하였으며, 환자운반 작업의 위험도는 인간공학적 평가도구인 OWAS, RULA, REBA를 이용하여 평가하였다. 연구결과 근골격계 증상 유경험자는 60.9%였으며 허리 부위의 증상 자각율(36.1%)이 가장 높았고 WMSDs을 유발하는 가장 큰 원인은 환자운반 작업(48.4%)이었다. 환자운반 작업의 인간공학적 위험도 평가 결과 주 들것을 구급차에 싣고 내리기, 들 것 장비를 이용하여 환자를 들어올리는 작업에서 OWAS는 3단계, RULA와 REBA는 3~4단계 수준이었고, 응급용들것으로 계단 이송, 척추고정판으로 차량내 환자 이동, 업거나 안고 계단이나 경사로를 이동하는 작업에서 OWAS, RULA, REBA 모두 3~4단계로 작업자세의 개선이 필요한 것으로 평가되어 119구급대원의 WMSDs 예방을 위해서는 즉각적인 작업자세의 개선이 요구된다.

• 한국건설순환자원학회논문집
• /
• 제4권4호
• /
• pp.363-370
• /
• 2016

경량 지오폴리머는 경량 시멘트 콘크리트보다 단순한 공정으로 제조가 가능하고 탁월한 내열 성능까지 갖춘 재료이다. 고형 지오폴리머의 밀도는 발포제와 지오폴리머 배합물과의 화학반응으로 발생되는 가스가 기공을 형성함으로서 감소시킬 수 있기 때문이다. 본 논문에서는 다양한 함량의 알루미늄 분말을 첨가하여 다공성 지오폴리머의 특성에 어떤 영향을 주는지 살펴보고자 하였다. 경량 지오폴리머의 겉보기 밀도는 알루미늄 분말 함량이 0.025, 0.05, 0.10wt% 범위에서 0.7에서 $1.2g/m^3$로 나타났는데 이는 고형 지오폴리머의 겉보기 밀도 값 $1.96g/cm^3$의 약 37~60%에 해당하였다. 경량 다공성 지오폴리머의 압축강도는 고형 지오폴리머의 압축강도 45MPa의 6~18%에 불과하였다. 고형 지오폴리머와 경량 지오폴리머 겔의 미세조직 형상은 유사하였다. 폴리프로필렌 섬유를 첨가한 지오폴리머 배합물의 작업성은 섬유 보강 시멘트 콘크리트에서와 마찬가지로 개선될 필요가 있다. 경량 다공성 지오폴리머는 현무암과 유사한 외관뿐만 아니라 뛰어난 내열 성능을 갖기 때문에 타일이나 보드 등 건축용 내장재로서의 활용 가능성이 높다고 본다.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.120-128
• /
• 2022

Printed circuit boards (PCBs) are a basic component in the electronics industry and are widely used in nearly all electronic products, such as mobile phones, tablet computers, and digital cameras, as well as in electric equipment. PCB manufacturing involves the use of many chemicals and chemical processes and therefore has more risks than other manufacturing sectors. This study aims to identify the causes of possible accidents during PCB manufacturing through risk assessment, develop and implement safety measures, and evaluate the effectiveness of these measures. Note that the safety measures developed to mitigate the risks of a certain process were also implemented for other similar processes. The risk assessments conducted over seven years, from 2015 to 2021, at a PCB manufacturing company identified 361 hazardous processes. Between 2016 and 2019, 41-56 hazardous processes were identified per year; such processes decreased to fewer than 20 per year after 2020. Application of the risk assessment results to the improvement of the hazardous processes with the similar characteristics seems to be effective in decreasing the risks. Equipment-related factors such as lack of appropriate maintenance, low work standards, and defective protection devices were responsible for 59.8% of all possible accidents. Because PCB manufacturing involves many chemicals, skin contact with hazardous substances, electric shock, fire, and explosion were the most common types of possible accidents (81.7%). In total, 505 safety measures were implemented, including 157 related to purchase and improvement of equipment and devices for safety (31.1%), 147 related to the installation/modification of fire prevention facilities (29.1%), and 69 related to the use of standard electrical appliances (13.7%). Risk assessment conducted after implementing the safety measures showed that these measures significantly decreased risk; 247 processes (68.4%) had a risk level of 3, corresponding to "very low," and 114 processes (31.6%) showed a risk level of 4, corresponding to "low." In particular, risk assessment of 104 processes with risk scores of 12 and 10 other processes with risk score of 16 showed that the risk decreased to 4 after implementing the safety measures. Thus, implementing these measures in similar manufacturing sectors that involve chemical processes can mitigate risk.

• 한국생활과학회지
• /
• 제19권1호
• /
• pp.167-177
• /
• 2010

This study examined consumer perception and use on labeling of cooking utensils made of plastic and glass to get information about improving the labeling. The data were collected from 505 adults in Seoul, Busan, Daegu, Daejeon, Incheon, and Gwangju. The data were analyzed by SPSS Windows V.14.0. Frequencies, t tests, one-way analysis of variance, and Duncan's multiple range tests were carried out. Many respondents checked off 'precautions in use' more than any other notice when they purchased the cooking utensils made of plastic and glass. Respondents were dissatisfied with the letter size and intelligibility of foreign language on the labeling. Most respondents preferred 'tag' for most cooking utensils made of plastic and glass. In addition, on necessity of precautions for each category of plastic cooking utensils, frying pans, plastic baskets, plastic water buckets, plastic seasoning bottles, the frying pan showed the highest need for 'do not place close to the fire'. Plastic cups and plastic containers showed the highest in 'whether utensils could be used in the microwave oven and accompanying precautions', and plastic cutting board showed the highest in 'matters relating to washing before use.' In the case of cooking utensils made of glass, 'precaution on shock' was the highest for glass cups and mugs and 'whether utensils could be used in the microwave oven and accompanying precautions' was the highest for glass pans, dishes and containers.

• 한국환경과학회지
• /
• 제16권9호
• /
• pp.1027-1037
• /
• 2007

The purpose of this study was to investigate the flora of Mt. Bongrae in Busan from February 2004 to May 2005. The flora in the surveyed area were identified 291 taxa that belonged to 82 families, 201 genera, 251 species, 35 varieties, and 5 forms. Among them, evergreen broad trees were identified 21 taxa, naturalized plants 30 taxa, especial plants decided by Ministry of Environment 24 taxa. By the vegetation of each slope, in northeast slope, it was dominated such as Pinus thunbergii community, Chamaecyparis obtusa community, Amorhpa fruticosa community, Trachelospermum asiaticum var. intermedium-Hedera rhombea community, north-northeast slope, it was distributed both Pinus thunbergii community and board-leaved tree community. In the southwest slope of coast site, it was presented plantation plants, according to altitude distributed such as natural vegetation, evergreen broad trees, warm-temperate plants. In southeast slope, it was to represent secondary vegetation such as Alnus firma community as a forest fire. Underside was mainly to search herbs such as naturalized plants and cruciferous family as a vegetable garden. In northwest slope, it was searched trees such as Pinus thunbergii community, Lindera obtusiloba, Styrax japonca, Prunus sargentii, Aralia elata, Zanthoxylum piperitum, Akebia quinata and herb layer such as Osmunda japonica, Allium thunbergii, Liriope platyphylla, Corydalis ochotensis, Scilla scilloides, Viola orientalis. Around the top, it was distributed such as Rhododendron mucronulatum-Rhododendron schlippenbachii community, Carpinus coreana, Viburnum erosum, Sorbus alnifolia.