• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.187-205
• /
• 2014

The global price of oil, which is both finite and limited in quantity, has been rising steadily because of the increasing requirements for energy in both developing and developed countries. Furthermore, regulations have been strengthened across all industries to address global warming. Many studies of hull resistance, propulsion and operation of ships have been performed to reduce fuel consumption and emissions. This study examined the design parameters of the propeller boss cap fin (PBCF) and hub cap for 6,000TEU container ships to improve the propulsion efficiency. The design parameters of PBCF have been selected based on the geometrical shape. Computational fluid dynamics (CFD) analysis with a propeller open water (POW) test was performed to check the validity of CFD analysis. The design of experiment (DOE) case was selected as a full factorial design, and the experiment was analyzed by POW and CFD analysis. Analysis of variance (ANOVA) was performed to determine the correlation among design parameters. Four design alternatives of PBCF were selected from the DOE. The shape of a propeller hub cap was selected as a divergent shape, and the divergent angle was determined by the DOE. Four design alternatives of PBCF were attached to the divergent hub cap, and the POW was estimated by CFD. As a result, the divergent hub cap with PBCF has a negative effect on the POW, which is induced by an increase in torque coefficient. A POW test and cavitation test were performed with a divergent hub cap with PBCF to verify the CFD result. The POW test result showed that the open water efficiency was increased approximately 2% with a divergent hub cap compared to a normal cap. The POW test result was similar to the CFD result, and the divergent hub cap with the PBCF models showed lower open water efficiency. This was attributed to an increase in the torque coefficient just like the CFD results. A cavitation test was performed using the 2 models selected. The test result showed that the hub vortex is increased downstream of the propeller.

• Korean Journal of Ichthyology
• /
• v.19 no.4
• /
• pp.343-349
• /
• 2007

Embryonic and larval developments on Pacific cod, Gadus macrocephalus are described from laboratory-reared specimens. The eggs (1.075~1.168 mm in diameter) were weakly adhesive, almost spherical in shape, transparent and unpigmented, showing a pale yellow yolk without oil globules. Hatching was occurred 220 hrs after fertilization at $9.8^{\circ}C$. The newly hatched larvae (3.72~4.40 mm in total length, TL) had 43~47 (11~13+32~34) myomeres, mouth and anus which was not yet opened. The yolk was completely absorbed at 4.58 mm TL, and transformed to postlarval stage. Locations of the anus and second dorsal fin origin, and distinctive growth of the larvae head were observed at 5.48 mm TL with melanophores in the gill cover and upper region of the occipital. In addition, melanophores were distinctive in the ventral region and caudal fin base at 6.88 mm TL. All fins were formed with a complete set of fin rays having the following counts (D. 3~7-12~14-13~14; A. 13-15) at 11.54 mm TL. Both lateral line and barbel of lower jaw were observed at 15.07 mm TL.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.1
• /
• pp.47-57
• /
• 2017

Solar energy is one of the important renewable energy resources. It can be used for air heating, hot water supply, heat source of desiccant cooling system and so on. And many researches for enhancing efficiency have been conducted because of these various uses of solar thermal energy. This study was performed to investigate the air heating performance of hybrid solar air-water heater that can heat air and liquid respectively or simultaneously and finding method for improving thermal performance of this collector. This collector has both liquid pipe and air channel different with the traditional solar water and air heater. Fins were installed in the air channel for enhancing the air heating performance of collector. Also air inlet & outlet temperature, ambient temperature and solar collector's inner part temperature were confirmed with different air velocity on similar solar irradiance. As a result, temperature of heated air was shown about $43^{\circ}C$ to $60^{\circ}C$ on the $30^{\circ}C$ of ambient temperature and thermal efficiency of solar collector was shown 28% to 73% with respect to air velocity. Also, possibility of improvement of thermal performance of this collector could be ascertained from the heat transfer coefficient calculated from this experiment. Thus, it is considered that the research for finding optimal structure of hybrid solar air-water heater for enhancing thermal performance might be needed to conduct as further study based on the method for improving air heating performance confirmed in this study.

• Development and Reproduction
• /
• v.12 no.3
• /
• pp.207-213
• /
• 2008

In order to monitor the developmental features of embryos, larvae, and juveniles of chub mackerel, Scomber japonicus, the fertilized eggs were obtained by artificial insemination. The fertilized eggs were spherical in shape and floated separately. Their membrane and yolk having 1 oil globule were transparent. The transparent eggs, having one oil drop in the yolk, were $0.94{\sim}1.02\;mm$ (mean, $0.95{\pm}0.03\;mm$) in diameter. The fertilized eggs started hatching at 51 hrs after fertilization in $20{\pm}0.5^{\circ}C$ water. The total length of the hatched larvae was $2.52{\sim}3.0\;mm$ (mean, $2.75{\pm}0.04\;mm$). At hatching, the larva, with the mouth and anus not opened yet, had yolk sack, $28{\sim}31$ myomeres and eyes with melanophore. Yolk completely 2 days after hatching and the total length of post-larvae $3.12{\sim}3.63\;mm$ (mean, $3.39{\pm}0.05\;mm$). At the 18 days after hatching, the tip of tail became curved at the end and the stems for pectoral, dorsal, and caudal fins appeared. Juveniles, having all firm rays, was $44.12{\sim}58.72\;mm$ (mean $55.95{\pm}6.74\;mm$) in TL 25 days after hatching.

• Applied Microscopy
• /
• v.40 no.1
• /
• pp.1-8
• /
• 2010

The ultrastructure of spermatogenesis and sperm in Chinese minnow, Rhynchocypris oxycephalus belonging to Leuciscinae was investigated by light and electron microscopes. The whitish testis was located between intestine and air bladder. The size of testis was major axis 2.3 cm, minor axis 6 mm. The testis contained numerous testicular cysts, and spermatogenesis was non-synchronized in these testicular cysts. In the case of spermatogonium, the nucleus was comparatively large ellipsoidal, and mitochondria showed a marked development. The size of primary spermatocyte was smaller than that of spermatogonia, and secondary spermatocyte was smaller than primary spermatocyte. The chromatin of spermatocyte was highly condensed according to their development. The nucleus with electron-dense was round shape. In spermiogenesis, flagella started to be formed and chromatin was more condensed. The mitochondria were rearranged in a middle piece. The sperm was formed by loss of cytoplasm. The head of mature sperm was a spherical shape and have not acrosome. The microtubules of flagella were arranged 9+2 structure. Also, the tail of sperm have not lateral fins.

• Korean Journal of Ecology and Environment
• /
• v.39 no.1 s.115
• /
• pp.62-72
• /
• 2006

Biological health in aquatic environments has been assessed by several approaches using various bio-taxa. Especially, fish has been identified as one of the best ecological indicators for an integrative health assessments in aquatic environments. In this preliminary study, the necropsy-based approach using the Health Assessment Index (Adams et al., 1993; HAI, Blazer, 2000), was employed for the assessments of aquatic environments influenced by effluent water from wastewater disposal plants (WDP) near a urban stream (i.e., Cap-Stream). For the impact analysis from the effluents, we developed 10 metric necropsy-based model including $M_l\;skin,\;M_2\;fin,\;M_3\;thymus,\;M_4\;spleen,\;M_5\;hindgut,\;M_6\;kidney,\;M_7\;liver.\;M_8\;eyes,\;M_9\;gill,\;and\;M_{10}$ pseudobranch. We set up duplicate controls (natural upstream water plus 5 fishes in each control tank) and duplicate treatments (effluent water from the WDP plus 5 fishes in each treatment tank) in the laboratory. Preliminary results showed that HAI values in the controls were zero, indicating an excellent condition by the criteria of HAI, while the HAI values in the treatments ranged between 40 and 150, indicating a poor condition. Also, various health conditions, based on the index of biological integrity (IBI), species richness, tolerance guilds, and trophic guilds supported the HAI approach. The HAI approach, not applied in Korea, not may be used as an surrogate fer ecological health assessment in lotic ecosystems.

• Korean Journal of Ichthyology
• /
• v.9 no.2
• /
• pp.186-194
• /
• 1997

Naturally beared larvae obtained from female fish kept in the aquarium were reared for 45 days in the laboratory. The naturally beared larvae were 3.19 mm in average total length (TL) with 9+15~16=24~25 myomeres. Melanophores were distributed on the dorsal margin of intestine tube, ventral margins of the tail and around the oil globule, but none on the top of head and on the pectoral fins. The larva (3.35 mm TL) consumed all yolk and oil globule in 5 days after bearing, and jaw bones and clavicle began to be ossified rapidly. In 22 days after bearing, the larvae averaged 6.30 mm TL and the caudal notochord flex $45^{\circ}C$. Fin development in S. marmoratus larvae proceeds in the following sequence : caudal, pectoral, dorsal, anal and ventral fin.

• Korean Journal of Ichthyology
• /
• v.5 no.2
• /
• pp.151-159
• /
• 1993

Greeling, Hexagrammos otakii Jordan et Starks is commonly found at the coastal waters of Korea and Japan. The authors carried out the artificial insemination in the laboratory on Dec, 17, 1987, and reared the hatched larvae in an aquarium. The eggs were demersal and adhesive, and their diameters were 2.00~2.15mm. Color of yolk was light yellow in the early stage, and then turned to orange before hatching. The yolk had numerous tiny oil globules. Hatching began about 477hours after insemination under water temperature of $10.0{\sim}14.5^{\circ}C$. The newly hatched larvae were elongate in shape and 7.48~8.25mm in total length(TL) with 49~50 myomeres. The larvae absorbed the yolk material and oil globules completely in 5days after hatching and became postlarvae. In 17days after hatching, mean total length of the larvae was 9.85mm, and the caudal notochord flex at $45^{\circ}$. In 23days, total length reached 10.54mm. The part of the fin-fold of the future dorsal and anal fins became high. Spawning season of the Greenling is known to be from November to January in the southern coast of Korea.

• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.257-262
• /
• 2013

A ship operating in rough sea may suffer from an undesirable motion which may severely degrade the performance of equipment onboard and give a person an uncomfortable feeling. Hence, roll stabilization received a considerable attention and various devices including bilge keels, stabilizing fins, gyroscopic, anti-rolling tanks, rudders and flaps have been conceived and utilized for the purpose. The Coanda effect is evident when a jet stream is applied tangential to a curved surface of a hydrofoil since then the jet increases the circulation around the foil and consequently the lift. Model tests and numerical simulation have been conducted to examine the practicality of a fixed type fin stabilizer augmented by the Coanda jet. The results show that the lift coefficient of the modified Coanda fin at the zero angle of attack identically coincides with that of the original fin at ${\alpha}=\26^{\circ}$ when Coanda jet is supplied at the rate of $C_j$ = 0.25. It is also shown that fixed type fin stabilizers for active control of the motions of ships and the other mobile units without rotation can be put to practical use if the Coanda effect is applied.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.933-940
• /
• 2013

In this study, we evaluated the heat release performance of two extruded-type and two swaged-type heat sinks used in an inverter for solar power generation. The number of fins and heat transfer areas of the two swaged-type heat sinks, namely S-62 and S-98, are 62 and 98 and $2.8m^2$ and $5.3m^2$, respectively. Those for the two extruded-type heat sinks, namely, E-38 and E-47, are 38 and 47 and $1.8m^2$ and $1.9m^2$, respectively. The heat release fractions of S-62 and S-98 were measured as 82.7 % and 86.3 %, respectively. Those of E-38 and E47 were measured to be 79.6 % and 81.6 %, respectively. In this experiment, despite the mass flow rates of air entering the heat sinks being almost the same, the heat release fractions increased with heat transfer area. Furthermore, despite S-62's heat transfer area being 47.4 % higher than that of E-47, its heat release fraction was higher by only 1.3 %. We believe that this indicates the better heat transfer property of the extruded-type heat sink. S-98's heat release is only 4.4 % higher than that of S-62, but its heat transfer area is 89.3 % higher; this suggests that its heat transfer area need to be optimized.