• 한국해양학회지
• /
• v.4 no.1
• /
• pp.17-35
• /
• 1969

This work concerns morphological studies of the Japaness jack mackerel, Trachurus japonicus(Temminck & Schlegel). A total of 48 random samples consisting of 2669 fish is examined, representing three geographic regions, namely, Kamakura, Nagasaki, and Tottori. Preservation affects length and weight of fish considerably, but the variability after 10 days is shown to be negligible. The variability in measuring the morphometric characters due to different measures and orders is found to be significant. They are relatively small, however, compared to the variability in mean length to be expected in samples drawn from the population. Two meristic characters, namely, anal and second dorsal fin rays and three morphometric characters, namely, head length, first and second dorsal insertion distances are chosen for the study. Results of the statistical analysis reveal that differences in the selected meristic characters among samples within and between regions are found to be significant. In general, it is reasonable to state that the jack mackerel collected in Nagasaki region, on the average, have greatest number of anal fin ray and second dorsal fin ray followed by Kamakura, and Tottori regions in that order. It is found that although no significant differences in the slope of regression line are noticed, the mean differences of the selected morphometric measurements in relation to fish length are found to be significant among samples within each region. Differences in the regression coefficients as well as the adjusted sample means are found to be significant between regions. The analysis suggests that samples from Nagasaki region, on the average, have longest head length and greatest distances from snout to the insertion of first dorsal and second dorsal fins followed by Kamakura, and Tottori regions in that order.

• Journal of fish pathology
• /
• v.21 no.1
• /
• pp.21-27
• /
• 2008

Mass mortality occurred in mud loaches, Misgurnus mizolepis, cultured in ponds located in Kunsan. External signs of affected fish showed hemorrhage of skin and fins, Internally, pale liver with congestion, enlarged kidney, and spleen and enteritis exhibited. Causative bacteria isolated from liver, spleen, and kidney of the disease fish. In biochemical tests, the isolates were similar with those of the reference strains, A. sobria. The aerolysine gene from the present isolate was amplified PCR with the primer SOBF and SOBB for A. sobria. The isolate was identified as A. sobria on the basis of those tests. In virulence test, the present isolate resulted in the development of clinical signs identical to those in naturally infected fish. The present results conclude that the present isolate is A. sobria and can be a pathogen which causes motile aeromonad septicemia to mud loach.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.10-17
• /
• 2007

Design of experiments (DOE) technique has been used to design an exhaust heat exchanger to reduce the exhaust gas temperature under high load conditions in a spark-ignition engine. The DOE evaluates the influence and the interaction of a selected eight design parameters of the heat exchanger affecting the cooling performance of the exhaust gas through a limited number of experiments. The heat exchanger was installed between the exhaust manifold and the inlet of the close-coupled catalytic converter (CCC) to reduce thermal aging. To maximize the heat transfer between exhaust gas and coolant, fins were implemented at the inner surface of the heat exchanger. The design parameters consist of the fin geometry (length, thickness, arrangement, and number of fin), coolant direction, heat exchanger wall thickness, and the length of the heat exchanger. The acceptable range of each design parameter is discussed by analyzing the DOE results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.1-7
• /
• 2006

In the present study, A 3-D chimera technique for overlapped bodies in relative motion is studied using unstructured meshes. If all node points of a mesh element at solid boundary are in another body, this element is excluded from computational domain. For computation of unsteady flow, non-active cells have proper variables using interpolation and extrapolation. These variables are used in next time step. The motion of a launching trajectory ejected from a wing and the motion of deploying fins of a trajectory which have not been simulated are computed to conform practicality of this technique.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.4 no.2
• /
• pp.50-56
• /
• 2008

The tubes in heat exchanger are typically made of copper alloy, stainless steel, carbon steel, titanium alloy material. Type-439 ferritic stainless steel is ferromagnetic material, and furnish higher heat transfer rates than austenitic stainless steels and higher resistance to corrosion-induced flaws. Ferritic stainless steel can be found in low-pressure(LP) feedwater heaters and moisture separator reheaters(MSRs) in turbine system. LP feedwater heaters generally utilize thin wall Type-439 stainless steel tubing, whereas MSRs typically employ a heavier wall tubing with integral fins. Service-induced damage can occur on the O.D(outside diameter) surface of Type-439 ferritic stainless steel tubing which is employed for MSRs tubing, and the most typical damage mechanism is vibration-induced tube-to-TSP(tube support plate) wear and fatigue cracking. The wear has been reported that occurs mainly on the OD surface. Accordingly, in this study, we have evaluated the flaw sizing capability of magnetic saturation eddy current technique using magnetic saturation probe and flawed specimen.

• Development and Reproduction
• /
• v.18 no.4
• /
• pp.311-319
• /
• 2014

Newly hatched black porgy larvae (Acanthopagrus schlegeli) swam to the surface, with the mouth and anus still closed and were 1.90-2.11 mm (mean, 2.0 mm) in total length (TL). The larvae were 2.71-2.94 mm TL (mean, 2.82 mm) on day 2 after hatching. At this time, about two-thirds of the yolk was absorbed, the bladder and intestines had formed, and the mouth and anus were open. Total length was 4.32-4.66 mm (mean, 4.45 mm) at the post-larval stage on days 5-6 after hatching, and the yolk and oil globule were almost absorbed. The end of the notochord began to flex, and 6-8 caudal fin rays were visible. The larvae were 15.37-16.1 mm TL (mean, 15.83 mm) at the juvenile stage on days 30-32 after hatching, and the number of rays in all fins was completely revealed.

• Applied Microscopy
• /
• v.29 no.4
• /
• pp.427-435
• /
• 1999

Spermatogenesis and fine structure of the spermatozoon of the marbled sole, Limanda yokohamae were examined by means of the scanning and transmission electron microscopy. The process of spermatogenesis of the marbled tole is similar to that of other teleost with external fertilization. During the spermiogenesis, chromatin that has been became fine]y granular progressively condenses into many large globules and that homogeneously condensed in the spermatozoan head. A spermatozoon consists of head and tail, and the acrosome is absent. The cytoplasmic collar contained eight mitochondria is observed in the posterior part of the head. The well -developed axonemal lateral fins are observed in the tail. In the TEM observation, the cross section of the axial filament shows '9+2' axonemal structure of microtubules, and the numerous vesicles are observed in the cytoplasm.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1034-1040
• /
• 1997

Temperature distribution of battery module consists of 11 batteries of 90Ah rate is analyzed using commercial software NISA II. Equivalent thermal resistance network is used to reduce the number of element in calculating heat transfer through a medium composed of several different thermal conductivity layers. Orthotropic model is used to put different thermal conductivity values according to Cartesian coordinate. Aluminum cooling fins are inserted in the middle of batteries to reduce battery module temperature. The cooling fin at the end of the module does not necessary in reducing maximum temperature. Combined effect of front and side cooling fin is analyzed to reduce the temperature difference among batteries. The maximum temperature difference among batteries is reduced within $3^{\circ}C$ when 4 aluminum cooling tin of 1mm thickness is inserted in battery module.

• Applied Microscopy
• /
• v.44 no.1
• /
• pp.1-7
• /
• 2014

The spermatogenesis of Siamese fighting fish, Betta splendens, belongs to Osphronemidae was investigated by light and electron microscopic observations. In primary spermatocyte stage, the nucleus was comparatively large ellipsoidal, and mitochondria showed a marked development in cytoplasm. In secondary spermatocyte stage, the germ cells were smaller than that of primary spermatocytes. The nucleus was a spherical shape and intercellular space was formed between germ cells. In spermatid stage, the early spermatids were not much different from a secondary spermatocyte. But, the chromatin condensation was occurred from the outside to the inside. The nucleus was more condensed. Intracellular space was larger than early spermatid. The mitochondria were rearranged in a middle piece, and occupied about half of the head part in early sperm. In sperm stage, the head of mature sperm was a spherical shape and had no acrosome. The flagellum was showed the typical 9+2 array of microtubules. Also, the tail of sperm had no lateral fins and outer coarse fibers. These ultrastructural characteristics can be used in classification of species.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.2
• /
• pp.200-211
• /
• 1998

Heat transfer performance improvement by fin and groovs is studied for condensation of R-11 on integral-fin tubes. Eight tubes with trapczodially shaped integral-fins having fin density from 748 to 1654fpm(fin per meter) and 10, 30 grooves are tested. A plain tube having the same diameter as the finned tubes is also used for comparison. R-11 condensates at saturation state of 32 $^{\circ}C$ on the outside tube surface coded by inside water flow. All of test data are taken at steady state. The heat transfer loop is used for testing singe long tubes and cooling is pumped from a storage tank through filters and folwmeters to the horizontal test section where it is heated by steam condensing on the outside of the tubes. The pressure drop across the test section is measured by menas pressure gauge and manometer. The results obtained in this study is as follows : 1. Based on inside diameter and nominal inside area, overall heat transfer coefficients of finned tube are enhanced up to 1.6 ~ 3.7 times that of a plain tube at a constant Reynolds number. 2. Friction factors are up to 1.6 ~ 2.1 times those of plain tubes. 3. The constant pumping power ratio for the low integral-fin tubes increase directly with the effective area to the nominal area ratio, and with the effective area diameter ratio. 4. A tube having a fin density of 1299fpm and 30 grooves has the best heat transfer performance.