• Transactions of Materials Processing
• /
• 제5권4호
• /
• pp.305-319
• /
• 1996

In this paper a finite element based system is presented for the prediction of the distributions of the recrystallized grain sizes in the workpiece in hot forging. The system adopts a fully coupled finite element thermo-mechanical model for predicting plastic deformation and heat transfer occurring in the workpiece and employs existing metallurgical models relating the recrystalliza-tion behavior with the thermo-mechanical variables such as temperatures strain and strain rate. The system is applied to upsetting of cylindrical preform. The predicted grain sizes are compared with the measurements. It is further applied to forging of a complex-shaped product.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.99-104
• /
• 1996

A proform for engine valve was designed by finite element method. In the preform design of engine valve, various initial billets are simulated for better preform to get sound final product. Here a preform is design to get desirable metal flow in the forming so that the final product has more uniform strain distribution. after forming. The analysis of the micro-structure of the value formed through the designed process was also performed and result was compared with that of simulation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.55-61
• /
• 1996

Finite element calculations are performed for crystalline solids subjected to plane strain tensile loading. Using Asaro's double slop model, shearband developments in single crystals are analyzed. The effect of various rate sensitivities and latent hardening parameters on microscopic plastic behavior was clarified. Moreover the deformation behavior of polycystals which have grain boundaries was compared to that of single crystals.

• Journal of the Society of Naval Architects of Korea
• /
• 제46권5호
• /
• pp.498-509
• /
• 2009

Present study is concerned with the simulation of plasticity models for the cyclic stressstrain behavior of aluminum alloy AC4C-T6 that can be used for primary materials of LNG cargo pump. Material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 was investigated through experiments and numerical simulations. Monotonic tensile and cyclic tension-compression test under symmetric load cycles was performed at both room temperature and cryogenic temperature of $-165^{\circ}C$. Based on the experimental data plastic hardening models were evaluated for isotropic/kinematic/combined hardening. FEA (Finite Element Analysis) models which describe the cyclic stress-strain relationship were evaluated for the simulation of plasticity. An appropriate hardening model is proposed comparing the results of FEA with those of experiments.

• Transactions of Materials Processing
• /
• 제13권7호
• /
• pp.594-599
• /
• 2004

In the sheet metal forming operations, the strain measurement of sheet panel is an essential work which provides the formability information needed in die design, process design, and product inspection. To measure efficiently complex geometry strains, the 3-dimensional automative strain measurement system, which theoretically has a high accuracy but practically has about 3～5％ strain error, is often used. For eliminating the strain error resulted in measuring the strains of formed panels using an automated strain measurement system, the position error calibration method is suggested, which computes accurate strains using the grids with accurate nodal coordinates. The accurate nodal coordinates are calculated by adding the nodal coordinates measured by the measurement system and the position error found using the multiple regression method as a function of the main error parameters obtained from the analysis of strain error in a standard cube. For the verification, the strain distributions of square and dome cups obtained from the position error calibration method are compared with those provided by the finite element analysis and ASAME.

• Nuclear Engineering and Technology
• /
• 제56권8호
• /
• pp.3347-3358
• /
• 2024

Addressing the challenge of identifying an appropriate set of material and irradiation parameters for accurate simulation models using crystal plasticity finite element method (CPFEM), this study proposes a novel two-stage method for nano-indentation modeling of ion-irradiated face-centered cubic (FCC) materials. It includes implementing the strain-gradient crystal plasticity (SGCP) theory with irradiation effects and the calibration of simulation parameters using the particle swarm optimization (PSO) algorithm with experimental data. The proposed method consists of two stages: establishing CPFEM without irradiation effects in stage 1 and modeling irradiation effects based on CPFEM in stage 2. Modeling the nano-indentation test of ion-irradiated stainless steel 304 (SS304) using real experimental data is conducted to evaluate the efficiency of the proposed method. The accuracy of the calibration method using PSO is verified through comparisons between simulation and experimental results for force-indentation depth and hardness-indentation depth relationships under both unirradiated and irradiated conditions. Moreover, effect of ion-irradiation on the mechanical behavior during the nano-indentation of single crystal SS304 is also examined to demonstrate that the proposed method is a powerful approach for nano-indentation modeling of ion-irradiated FCC single crystals using SGCP theory and the PSO algorithm.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.72-82
• /
• 2004

The deformation mechanism of hexagonal close-packed materials is quite complicate including slips and twins. A deformation mechanism, which accounts for both slip and twinning, was investigated for polycrystalline hop materials. The model was developed in a finite element polycrystal model formulated with initial strain method where the stiffness matrix in FEM is based on the elastic modulus. We predicted numerically the texture of Mg alloy(AZ31B) sheet by using FEM based on crystal plasticity theory. Also, we introduced the recrystallized texture employed the maximum energy release theory after rolling. From the numerical study, it was clarified that the shrink twin could not be the main mechanism for shortening of c-axis, because the lattice rotation due to twin rejects fur c-axis to become parallel to ND(normal direction of plate). It was showed that the deformation texture with the pyramidal slip gives the ring type pole figure having hole in the center.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제26권8호
• /
• pp.1672-1679
• /
• 2002

This paper provides an engineering J estimation equation for cylinders with finite internal axial surfacecracks under internal pressure. The proposed equation is the J estimation equation based on deformation plasticity using Ramberg-Osgood (R-O) materials. Based on detailed 3-D FE results using deformation plasticity, plastic influence functions for fully plastic J components are tabulated for practically interesting ranges of the mean radius-to-thickness ratio, the crack depth-to-length ratio, the crack depth-to-thickness ratio. the strain hardening index for the R-O material, and the location along the semi-elliptical crack front. Based on tabilated plastic influence functions, the J estimation equation along the crack front is proposed and validated for R-O materials. Good agreements between the FE results and the proposed J estimation provide confidence in the use of the proposed method to elastic-plastic fracture mechanics of pressurized piping.

• Korean Journal of Materials Research
• /
• 제28권5호
• /
• pp.315-315
• /
• 2018

• Transactions of Materials Processing
• /
• 제8권1호
• /
• pp.101-107
• /
• 1999

The upset forging stage is the initial work in the forging process. It is used to remove the segregation and cavities of the ingot. Specially in handling large sized ingot, an improper upset forging can cause serious surface tearing. However, there is no detail reference for stable upset forging work. To resolve this difficulty, we studied several factors such as upset forging time, temperature varation of ingot, damage, load and stain rate etc., by using the rigid-plastic finite element approach available in the DEFORM code. Numerical simulation results indicated that: the load value of upset forging works shows severe decreasing trend at a certain point, same as strain rate. Also defects were found to be concentrated around the upper and lower portions of the ingot. With these results, we can estimate a guideline for stable upset forging work.