• 디지털산업정보학회논문지
• /
• 제16권2호
• /
• pp.1-9
• /
• 2020

Many cryptographic and error control coding algorithms rely on finite field GF(2m) arithmetic. Hardware implementation of these algorithms needs an efficient realization of finite field arithmetic operations. Finite field multiplication is complicated among the basic operations, and it is employed in field exponentiation and division operations. Various algorithms and architectures are proposed in the literature for hardware implementation of finite field multiplication to achieve a reduction in area and delay. In this paper, a low area and delay efficient semi-systolic multiplier over finite fields GF(2m) using the modified Montgomery modular multiplication (MMM) is presented. The least significant bit (LSB)-first multiplication and two-level parallel computing scheme are considered to improve the cell delay, latency, and area-time (AT) complexity. The proposed method has the features of regularity, modularity, and unidirectional data flow and offers a considerable improvement in AT complexity compared with related multipliers. The proposed multiplier can be used as a kernel circuit for exponentiation/division and multiplication.

• 대한임베디드공학회논문지
• /
• 제14권6호
• /
• pp.313-319
• /
• 2019

Finite field operations have played an important role in error correcting codes and cryptosystems. Recently, the necessity of efficient computation processing is increasing for security in cyber physics systems. Therefore, efficient implementation of finite field arithmetics is more urgently needed. These operations include addition, multiplication, division and inversion. Addition is very simple and can be implemented with XOR operation. The others are somewhat more complicated than addition. Among these operations, multiplication is the most important, since time-consuming operations, such as exponentiation, division, and computing multiplicative inverse, can be performed through iterative multiplications. In this paper, we propose a multiplexer based parallel computation algorithm that performs Montgomery multiplication over finite field using redundant basis. Then we propose an efficient multiplexer based semi-systolic multiplier over finite field using redundant basis. The proposed multiplier has less area-time (AT) complexity than related multipliers. In detail, the AT complexity of the proposed multiplier is improved by approximately 19% and 65% compared to the multipliers of Kim-Han and Choi-Lee, respectively. Therefore, our multiplier is suitable for VLSI implementation and can be easily applied as the basic building block for various applications.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.1-7
• /
• 2006

This paper, presents a comparison between numerical analysis and field test on a real offshore platform in Bohai Bay, China. This platform is a steel jacket offshore platform with vertical piles. The field testing under wave-induced force and wind force etc. was conducted, in order to obtain the dynamic parameters of the structure, including the frequencies of the jacket platform, as well as the corresponding damping ratios and mode shapes. The natural excitation technology (NexT) combined with eigensystem realization algorithm (ERA) and the peak picking (PP) method in frequency domain are carried out for modal parameter indentification under operational conditions. The three-dimeansional finite element model (FEM) is constructed by ANSYS and analytical modal analysis is performed to generate modal parameters. The analytical results were compared with experimental results. A good agreement was achieved between the finite element and analysis and field test results. It is further demonstrated that the numerical and experimental modal analysis provide a comprehensive study on the dynamic properties of the jacket platform. According to the analysis results, the modal parameters identification under ambient excitation can calibrate finite element model of the jacket platform structures, or can be used for the structural health monitoring system.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1835-1843
• /
• 2003

This paper introduces the development of the caliper system for a geometry PIG (Pipeline Inspection Gauge). The objective of the caliper system is to detect and measure dents, wrinkles, and ovalities affect the pipe structural integrity. The developed caliper system consists of a finger arm, an anisotropic permanent magnet, a back yoke, pins, pinholes and a linear hall effect sensor. The angle displacement of the finger arm is measured by the change of the magnetic field in sensing module. Therefore the sensitivity of the caliper system mainly depends on the magnitude of the magnetic field inside the sensing module. In this research, the ring shaped anisotropic permanent magnet and linear hall effect sensors were used to produce and measure the magnetic field. The structure of the permanent magnet, the back yoke and pinhole positions were optimized that the magnitude of the magnetic field range between a high of 0.1020 Tesla and a low of zero by using three dimensional nonlinear finite element methods. A simulator was fabricated to prove the effectiveness of the developed caliper system and the computational scheme using the finite element method. The experimental results show that the developed caliper system is quite efficient for the geometry PIG with good performance.

• 대한전자공학회논문지SD
• /
• 제42권1호
• /
• pp.57-67
• /
• 2005

고속 스칼라곱 연산은 타원곡선 암호 응용을 위해서 매우 중요하다. 보안 상황에 따라 유한체의 크기를 변경하려면 타원곡선 암호 보조프로세서가 크기 가변 유한체 연산 장치를 제공하여야 한다. 크기 가변 유한체 연산기의 효율적인 연산 구조를 연구하기 위하여 전형적인 두 종류의 스칼라곱 연산 알고리즘을 FPGA로 구현하였다. Affine 좌표계 알고리즘은 나눗셈 연산기를 필요로 하며, projective 좌표계 알고리즘은 곱셈 연산기만 사용하나 중간 결과 저장을 위한 메모리가 더 많이 소요된다. 크기 가변 나눗셈 연산기는 각 비트마다 궤환 신호선을 추가하여야 하는 문제점이 있다. 본 논문에서는 이로 인한 클록 속도저하를 방지하는 간단한 방법을 제안하였다. Projective 좌표계 구현에서는 곱셈 연산으로 널리 사용되는 디지트 serial 곱셈구조를 사용하였다. 디지트 serial 곱셈기의 크기 가변 구현은 나눗셈의 경우보다 간단하다. 최대 256 비트 크기의 연산이 가능한 크기 가변 유한체 연산기를 이용한 암호 프로세서로 실험한 결과, affine 좌표계 알고리즘으로 스칼라곱 연산을 수행한 시간이 6.0 msec, projective 좌표계 알고리즘의 경우는 1.15 msec로 나타났다. 제안한 타원곡선 암호 프로세서를 구현함으로써, 하드웨어 구현의 경우에도 나눗셈 연산을 사용하지 않는 projective 좌표계 알고리즘이 속도 면에서 우수함을 보였다. 또한, 메모리의 논리회로에 대한 상대적인 면적 효율성이 두 알고리즘의 하드웨어 구현 면적 요구에 큰 영향을 미친다.

• 대한수학회논문집
• /
• 제33권3호
• /
• pp.759-765
• /
• 2018

We use the finite method developed by C. Athanasiadis based on Crapo-Rota's theorem to give a complete formula for the characteristic polynomial of hyperplane arrangements ${\mathcal{J}}_n$ consisting of the hyperplanes $x_i+x_j=1$, $x_k=0$, $x_l=1$, $1{\leq}i,j,k,l{\leq}n$.

• 대한수학회보
• /
• 제51권4호
• /
• pp.1087-1100
• /
• 2014

We present an accurate and efficient numerical method for solving the Black-Scholes equation. The method uses an adaptive grid technique which is based on a far-field boundary position and the Peclet condition. We present the algorithm for the automatic adaptive grid generation: First, we determine a priori suitable far-field boundary location using the mathematical model parameters. Second, generate the uniform fine grid around the non-smooth point of the payoff and a non-uniform grid in the remaining regions. Numerical tests are presented to demonstrate the accuracy and efficiency of the proposed method. The results show that the computational time is reduced substantially with the accuracy being maintained.

• 대한임베디드공학회논문지
• /
• 제12권1호
• /
• pp.11-18
• /
• 2017

Finite field arithmetic has been extensively used in error correcting codes and cryptography. Low-complexity and high-speed designs for finite field arithmetic are needed to meet the demands of wider bandwidth, better security and higher portability for personal communication device. In particular, cryptosystems in GF($2^m$) usually require computing exponentiation, division, and multiplicative inverse, which are very costly operations. These operations can be performed by computing modular AB multiplications or modular $AB^2$ multiplications. To compute these time-consuming operations, using $AB^2$ multiplications is more efficient than AB multiplications. Thus, there are needs for an efficient $AB^2$ multiplier architecture. In this paper, we propose a low latency Montgomery $AB^2$ multiplier using redundant representation over GF($2^m$). The proposed $AB^2$ multiplier has less space and time complexities compared to related multipliers. As compared to the corresponding existing structures, the proposed $AB^2$ multiplier saves at least 18% area, 50% time, and 59% area-time (AT) complexity. Accordingly, it is well suited for VLSI implementation and can be easily applied as a basic component for computing complex operations over finite field, such as exponentiation, division, and multiplicative inverse.

• 디지털산업정보학회논문지
• /
• 제18권1호
• /
• pp.1-9
• /
• 2022

Galois field arithmetic is important in error correcting codes and public-key cryptography schemes. Hardware realization of these schemes requires an efficient implementation of Galois field arithmetic operations. Multiplication is the main finite field operation and designing efficient multiplier can clearly affect the performance of compute-intensive applications. Diverse algorithms and hardware architectures are presented in the literature for hardware realization of Galois field multiplication to acquire a reduction in time and area. This paper presents a low complexity semi-systolic multiplier to facilitate parallel processing by partitioning Montgomery modular multiplication (MMM) into two independent and identical units and two-level systolic computation scheme. Analytical results indicate that the proposed multiplier achieves lower area-time (AT) complexity compared to related multipliers. Moreover, the proposed method has regularity, concurrency, and modularity, and thus is well suited for VLSI implementation. It can be applied as a core circuit for multiplication and division/exponentiation.

• 대한전자공학회논문지SD
• /
• 제44권3호
• /
• pp.35-42
• /
• 2007

타원곡선 암호 시스템에서 유한체 연산은 핵심적인 부분을 차지하고 있지만 나눗셈 연산의 경우 연산 과정이 복잡하여 이를 위한 효율적인 알고리즘 및 하드웨어 설계가 필요하다. 본 논문에서는 매우 큰 소수 m을 가지는 $GF(2^m)$상에서 효율적인 면적과 연산시간을 갖는 Radix-4 시스톨릭 나눗셈기를 제안한다. 제안된 유한체 나눗셈기는 유클리드 알고리즘과 표준기저 방식을 사용하였다. 수학적 정리를 통한 효율적인 알고리즘과 Radix-4에 맞는 새로운 카운터 구조를 제안하였고 이를 VLSI 설계에 적합하도록 시스톨릭 구조를 이용하여 설계하였다. 제안된 구조는 기존의 병렬 및 직렬 나눗셈기, Digit-serial 시스톨릭 나눗셈기와 비교해서 효율적인 면적과 연산 시간을 갖는다. 본 연구에서는 $GF(2^{193})$에서 동작하는 유한체 나눗셈기를 설계하였으며, 동부아남 $0.18{\mu}m$ 표준 셀 라이브러리를 사용하여 합성한 결과 최대 동작 주파수는 400MHz이다.