• 소성∙가공
• /
• 제17권3호
• /
• pp.189-196
• /
• 2008

Alloy718 is the nickel-base super alloy well used as gas turbine components under severe operating conditions because of its high strength at high temperature and excellent creep resistance. In this study, a coupling bolt for the gas turbine component is manufactured by hot heading process instead of whole machining in order to improve the mechanical properties. Die shape for the hot heading has been designed by general design rule of hot forging and also optimal process condition has been investigated by finite element method. The initial billet temperature and the punch speed have been determined by $1150^{\circ}C$ and 600mm/s on the basis of finite element analysis, respectively. The coupling bolt has been manufactured by 200ton screw press and evaluated by experiment in order to investigate the mechanical properties. As a result of experiment, the mechanical properties such as hardness, tensile strength and creep behavior have been superior to those manufactured by machining.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.876-888
• /
• 1986

본 논문에서는 자유 표면과 강체부분이 많은 피어싱 공정의 해석에서 발생하 는 해의 수렴성 저하를 방지하기 위하여 비정상 상태의 가공경화 효과와 강체 연속처리 리방법을 프로그램 개발에 적용하고 프로그램 개발에 적용하고 프로그램 범용성을 높 이기 위해 초기 속도장 발생 프로그램을 개발하여 본 공정 해석에 적용하여 보려고 한 다. 또한 재료를 가공 경화를 고려한 강소성체(rigid-plastic material)로 가정해서 시편에 크랙이 발생하여 파괴될때까지 컴퓨터 시뮬레이션을 수행한 후 냉간 피어싱 공 정에 있어서 표면 크랙의 발생과 성장 그리고 파괴에 가장 많은 영향을 미치는 인자들 을 계산결과를 토대로 실험과 비교조사하고, 실험 시편의 지름과 높이 그리고 마찰상 태를 다르게 조합해서, 실험과 계산을 시하여 시편 모양에 따른 변형 모우드(mode)와 파괴 모우드의 차이를 규명해 보기로 한다.

• 한국화재소방학회논문지
• /
• 제16권2호
• /
• pp.8-13
• /
• 2002

유도가열 기술은 담금질, 단조를 위한 예열, 용융 그리고 요리 등과 같은 산업 전반에 걸쳐서 아주 폭넓게 사용되는 기술이다. 본 논문에서는 IH-JAR의 효과적인 설계를 위하여 자계 및 열 해석을 하였다. IH-lAR의 내부자계는 3차원 축대칭 유한요소법을 사용하여 해석하였으며, 열원은 IH-JAR 내부에서 유도된 와전류에 의하여 발생되고, 열은 열원과 열방정식을 사용하여 계산되어진다. 또한, IH-JAR의 온도분포를 시간과 투자율에 따라 제시하였다.

• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.22-27
• /
• 2020

Ring rolling is a type of forging for manufacturing large-diameter rings. Products manufactured by ring rolling are useful in the aerospace industry because of their excellent mechanical properties and high dimensional accuracy. The major components of the ring rolling process are a mandrel and main roll that shape the inside and outside of the ring, an axial roll that shapes the top and bottom of the ring, and a side rolls to position the ring. In this study, a simulation of ring rolling using finite element method (FEM) was performed. DEFORM, a commercial machining analysis program, was used. Based on the simulations, the mandrel feed force required for machining and the drive torque of the main roll were predicted. It was also possible to identify the metal flow caused by machining.

• 소성∙가공
• /
• 제24권5호
• /
• pp.332-339
• /
• 2015

In the current paper, a cold forging sequence was developed to manufacture a precisely cold forged H/Lower, which is used as the air back unit in commercial automobiles. The preform shape of the H/Lower influences the dimensional accuracy and stiffness of the final product. The shape factor (SF) ratio and shape of the tools are considered as the design parameters to achieve adequate backward extrusion height and maintain appropriate thickness variations. The optimal conditions of the design parameters were determined by using an artificial neural network (ANN). To experimentally verify the optimal preform and tool shapes, the experiments of the backward extrusion of the H/Lower were executed. The process design methodology proposed in the current paper, can provide a more systematic and economically feasible means for designing the preform and tool shapes for cold forging.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.291-294
• /
• 2005

The microstructure evolution of Alloy 718 during the direct age(DA) process was predicted using the recrystallization model and finite element analysis. The DA process of Alloy 718 was performed in two-step forging using capsulated cylindrical billets of 122mm in diameter and 180mm in height. In order to evaluate the microstructural change during the forging, a dynamic recrystallization model of Alloy 718 was implemented onto the user-subroutine of the commercial FEM code. The prediction of microstructure evolution in DA processed Alloy 718 pancake was compared with experimental results.

• 한국기계가공학회지
• /
• 제6권4호
• /
• pp.44-49
• /
• 2007

In this paper, propose an optimal design to improve the mechanical efficiency of gate valve made by forging method. In order to design the experiments using table of orthogonal array and optimization design is conducted as application of real response model to Taguchi method based approximation model using computer simulation. Also, from verification of the response model with optimized results was confirmed that usefulness and reliance of application Taguchi method to structural optimum design using finite element analysis and equation.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.24-30
• /
• 2009

In this paper, the effect of heat treatment on forgeability is investigated and an improved heat treatment cycle is proposed for the bearing steel, SUJ2. An application example of a bearing inner race cold forging, which has small cracks in the bottom after backward extrusion and piercing, is found from a cold forging industry. The process is evaluated by finite element analysis and several heat treatment cycles are examined in order to propose an improved heat treatment cycle. The effect of heat treatment on material hardness and tool life, dimensional accuracy and forming load is revealed through experiment.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 춘계학술대회 논문집
• /
• pp.129-136
• /
• 1994

Differential side bevel gears have been produced by machining process, but recently cold forging process for the bevel gear is under development in domestic industry. This study presents the possibility to form not only bevel gear but also spline gear at the same time using the experiment and numerical analysis. The preform shape is designed to form both bevel gear and spline gear simultaneously by the backward tracing scheme of the rigid-plastic finite element method(FEM). The experimental results confirm that the numerically-designed preform is satisfactory to form both bevel gear and spline gear. It is noted that the backward tracing scheme is helpful in designing preforms.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.57-62
• /
• 2015

A large variety of pipe flanges are required in the marine and construction industry. Pipe flanges are usually welded or screwed to the pipe end and are connected with bolts. This approach is very simple and has been widely used for a long time; however, it results in high development costs and low productivity, and the products made through this approach usually have safety problems in the welding area. In this research, a new approach for forming pipe flanges based on cold forging and the floating die concept is presented. This innovative approach increases the effectiveness of the material usage and saves time and costs compared with the conventional welding method. To ensure the dimensional accuracy of the final product, finite element analysis (FEA) was carried out to simulate the process of cold forging, and orthogonal experiment methods were used to investigate the influence of four manufacturing factors (stroke of distance, pin die angle, forming of pipe diameter, and speed of the die) and predict the best combination of them. The manufacturing factors were obtained through numerical and experimental studies, which show that the approach is very useful and effective for the forming of pipe flanges and could be widely used in the future.