• 대한산업공학회지
• /
• 제24권4호
• /
• pp.649-660
• /
• 1998

Steel making in Mini Mill consists of three major processing stages: molten steel making in an electric arc fuenace, slab casting in a continuous caster, and hot rolling in a finishing mill. Each processing stage has its own lot grouping criterion. However, these criteria in three stages are conflicting with each other. Therefore, delveloping on efficient lot grouping algorithm to enhance the overall productivity of the Mini Mill is an extremely difficult task. The algorithm proposed in this paper is divided into three steps hierarchically: change grouping, cast grouping, and roll grouping. An efficient charge grouping heuristic is developed by exploiting the characteristics of the orders, the processing constraints and the requirements for the downstream stages. In order to maximaize the productivity of the continuous casters, each cast must contain as many charges as possible. Based on the constraint satisfaction problem technique, an efficient cast grouping heuristic is developed. Each roll consists of two casts satisfying the constraints for rolling. The roll grouping problem is formulated as a weighted non-bipartite matching problem, and an optimal roll grouping algorithm is developed. The proposed algorithm is programmed with C language and tested on a SUN Workstation with real data obtained from the H steel works. Through the computational experiment, the algorithm is verified to yield quite satisfactory solutions within a few minutes.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.185-192
• /
• 2020

A novel binding site for metal ion made by designing molecule with tetrazolo quinoline with hydrazine carboxamide (TQC) and the designed molecule successfully synthesized. The probe works by selectively detecting Al3+ ion via both fluorimetric and colorimetric approach. The probe's effectiveness towards aluminium ion detection is highly sensitive and selective with no substantial interference with other competing ions. The added Al3+ ion to TQC fetched a rapid change of visual color to yellow from colorless, also the response of fluorescence turn-on. The fluorescence turn-on and color change visibly by the probe TQC with Al3+ ion credited to the ICT phenomenon (intramolecular charge-transfer transition). The likely interaction of the probe with aluminium ion has also been there predicted from ESI-MS spectral analysis results. The usefulness of the probe confirmed by practical utility by making a test kit to monitor Al3+ ion in water which showed a naked eye detection by notable color change.

• 한국염색가공학회지
• /
• 제34권2호
• /
• pp.127-133
• /
• 2022

With the increasing interest in the expression of individuality and appearance of modern people, it is time to conduct research and development of novel hair coloring from various angles. Therefore, taking into account the order of discoloration of hair pigments, we selected a creative and novel emulsion as a novel material for hair coloring, rather than a cosmetic material such as hot water extract using natural products dealt with in previous studies, commercially available hair manicure, and oxidation hair dye for hair. Thus, the change in tensile strength and elongation of hair samples by color was studied. As a result of the study, hair with green emulsion paint had a significantly higher maximum load, maximum stress, maximum elongation and breaking load, breaking stress, breaking elongation values are shown. Maximum in terms of modulus, green emulsion applied hair and the control group were higher in the 0-15s strain and 15-145s sections, respectively, and the tangential modulus value was much higher in the control group than the experimental group hairs in all the 0-145s sections. This study, which analyzes the dynamic changes of hair samples that extend the daily color gamut, will greatly contribute to the development of innovative hair coloring materials in the research and production of hair beauty works, and it is judged that it will also contribute to the development of the beauty industry.

• 건축역사연구
• /
• 제31권4호
• /
• pp.45-56
• /
• 2022

Gachiljang(假漆匠), along with Jinchiljang(眞漆匠), is an important craftsman who cannot be left out during the finishing process of wooden furniture and wooden buildings during the Joseon Dynasty. The current definition of Gachiljang does not properly explain the nature and role of Gachiljang. In many related terminology dictionaries, Gachiljang is defined as "artisan who dose the base paintwork of Dancheong." But an analysis of the Joseon Dynasty's Uigwe(儀軌) shows that Gachiljang appears frequently in works that are not related to Dancheong at all. Therefore the current definition seems to be inaccurate and need to be revised. Gachiljang is a name that contrasts with Jinchiljang, and he makes and paints Myongyu(明油). Just as Jinchiljang uses not only lacquer but also various pigments to paint colorful lacquer, Gachiljang also uses various pigments to decorate buildings or furniture in a fancy way and then finishs with a transparent paint. Even in the Dancheong(丹靑) work of the building, all the base painting and finish coating work will be in charge of Gachiljang, except for the paintings performed by the Whawon(畫員) or the Whasa(畫師).

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.411-414
• /
• 2015

The purpose of this study is to conduct a comparative analysis between Korea and the United States of the supply process of unit modular housing at both the factory production phase and the transportation and lifting phase, as part of an attempt to invigorate the unit modular housing market in Korea. Unlike the practice in the United States, one of Korea's unique characteristics is that the floor is constructed with reinforced concrete and hot water heating system. To do this, the wet method in Korea is used that includes concrete placement, curing and constructing hot water floor heating system at the factory production phase, which results in a longer production time and also requires the lifting of heavier loads. In the United States, interior and exterior finishing works of modular housing are performed by different companies, and the distance between the unit module factory and the construction site is quite far. This kind of dualized production structure may cause confusion when it comes to schedule management, procurement management, and stock management. Moreover, problems caused by external environmental factors such as wind and rainfall were reported in the course of long-distance transportation. The results of this case comparison are expected to provide fundamental data that will reduce the amount of trial and error in the unit module production, transportation and lifting work in Korea, which has a comparatively small number of unit modular housing cases.

• Journal of Digestive Cancer Research
• /
• 제5권1호
• /
• pp.16-22
• /
• 2017

A specialist in the medical field is probably one of the most time-consuming professions to train for before one is considered an expert. Inclusive of medical school, it can take as long as 20 or more years of structured training before one graduates as a new specialist in a particular surgical subspecialty or medical field. A fellowship is often the last official phase in this professional marathon, typically defined as a 1 to 2-year full-on clinical subspecialty experience. One would expect this important "finishing school" to be well researched and written about, however, as compared to other professionals and fields, there is scanty literature on how one can get into a good fellowship program. This is a perspective piece on the intricacies of securing a position in a good fellowship program, drawn from the collective experience of the authors, their colleagues and friends. There are several ways to achieve this and many processes one will encounter. A variety of factors one will need to consider, decide and works towards in this effort of optimizing of their chances of success in getting into their fellowship program of choice. The thought processes, suggestions and solutions at each phase may be helpful. In conclusion, obtaining a choice fellowship position is as much an art as a science, and maybe some luck. Many factors, some more obvious and objective, some softer and more subtle, can all influence the outcome in one way or another.

• 한국건설관리학회논문집
• /
• 제16권5호
• /
• pp.97-104
• /
• 2015

공동주택에 대하여, 2000년 이후 건설한 대상 실적 중 25개 현장에 골조. 미장, 내장, 설비, 전기 통신, 기타의 공종별로 구분하여 월별 노무량의 투입실적의 자료를 수집하였다. 이를 100%기간으로 표준화 된 공기로 변환하여 공종별로 구분하여 노무량 비율로 환산하여 노무비율의 흐름을 분석한 결과 다음과 같이 결론을 도출하였다. (1) 노무비율의 크기는 골조공사 38.25%, 미장공사 5.10%, 내장공사 5.67%, 기계설비공사 9.10%, 전기 통신공사 8.76%, 기타공사 33.12%로 골조공사가 가장 크다. (2) 노무비율이 투입 되는 피크 시기는 52.5%월부터 62.5%월까지이고 3.6%의 노무비율이었다. (3). %월별로 골조공사가 가장 큰 시기는 35%월이고 이때 %월당 2.12% 투입 노무비율이었다. 골조공사가 마무리가 시작되는 65%월부터 80%월에 서로 다른 공종간의 상호 간섭이 가장 큰 시기였다. 본 연구의 결과는 공동주택 건설공사에서 공종별로 가장 큰 혼잡도가 높은 시기를 알려주고 있으며, 이 시기의 집중 공정관리 하는 것이 성공적인 프로젝트 수행에 필수적인 사항이 된다.

• 한국건설관리학회논문집
• /
• 제22권6호
• /
• pp.120-130
• /
• 2021

최근 정부는 건설재해 예방을 위하여 건설공사 안전관리를 강화하고 있으며, 예방적 차원의 작업자 안전관리 방안이 중요한 실정이다. 한편 모듈러 건축은 중고층 건축물 등으로 점차 확대 적용될 예정이나, 작업환경이 열악하고 안전관리가 미흡한 중소규모 건설현장이 많아 재해예방을 위한 안전관리가 미흡한 실정이다. 또한 국내 모듈러 건축의 안전관리 방안은 작업자의 안전사고에 영향을 미치나 시공오차, 하자 등 구조안전과 관련한 요소를 관리하는 품질관리에 집중되어 있어, 작업자의 안전보건을 관리하여 재해를 예방하는 작업자 안전관리는 부족한 실정이다. 따라서 본 논문에서는 국내 연구 개발된 사례들을 분석하고 전문가 자문을 통하여 도출된 모듈러 건축의 작업자 안전관리를 위한 체크리스트의 분류체계를 제안하였다. 분류체계는 공장제작, 운송, 현장시공을 대분류로 구성하였으며, 하위체계는 현장시공의 6가지의 중분류 중 모듈러 골조설치 공사의 세부작업인 양중작업과 조립작업을 중심으로, 12가지의 단위작업을 구분하였다. 그리고 안전관리를 위한 관리요소에 따른 단위작업별 작업내용을 정의하고 분류체계에 최종적으로 반영하였다. 본 연구의 결과가 모듈러 건축의 건설현장에서 효율적인 안전관리를 수행하는데 기여할 수 있기를 기대한다.

• 한국건설관리학회논문집
• /
• 제5권6호
• /
• pp.138-145
• /
• 2004

공사에 소요되는 기간은 시설물의 품질과 비용에 직접적인 영향을 미치지만, 고등학교 시설공사의 경우 경험과 직관에 의거하여 공기를 산정하고 있어 공사수행과정에서 계약당사자 간에 분쟁이 많이 발생하고 있다. 본 논문은 고등학교 시설공사에 소요되는 기간의 산정에 영향을 미치는 다양한 요인을 분석하여 공기 산정기준을 제안하는 것으로, 인천지 역에서 최근에 개교한 고등학교의 실적자료를 수집하여 다중선형 회귀분석 하였다. 회귀분석 결과로 얻은 순 공사기간에 인천지 역의 기후특성을 고려하여 산정한 작업불가능기간을 더하여 총 공사기간을 산출 하였다. 본 논문에서 제안한 공기 산정식은 공사발주 및 계약 시 계약공기를 정확하게 산정 하는데 도움을 줄 수 있을 것이다

• 패션비즈니스
• /
• 제2권2호
• /
• pp.77-84
• /
• 1998

As a result of surveying the process for sewing, the problems involving the outlook of sewn apparels were error off the standard dimensions and uneven sizes, which verifies the need for urgent technological guidance and development. On the other hand, the majority of the businesses were operating their sewing machines at the speed of 2,000 rpm or higher. Such a conventional working method may not well reflect the properties of the stretch fabrics, causing poorer quality products. Moreover, most of the businesses were using the ball-point needles which should be replaced with appropriate ones for stretch fabric. The types of feed dog which were used most were Drop feed, Union feed, Confound feed, Differential feed in their oder. Anyway, the automatized dog should urgently replace these inefficient ones for stretch fabric. Meanwhile, the types of presser foot which were used most were Plain foot, Teflon foot, Roller foot, Ring foot in their order, which also necessitates their replacement which Teflon foot. 2. As a result of surveying the process for finishing and inspection, while the causes scores less than 3 points, those due to pressers scored more than 3 points. This results suggests that a technological guidance is needed for the pressing work. Lastly, the causes of defect due to poor outlook attributable to such notions as button or zipper and those due to the uneven sizes scored more than 3 points, which suggests that the entire of needle works should be reformed through scientific research and technological guidance.