• 대한치과기공학회지
• /
• 제44권3호
• /
• pp.67-75
• /
• 2022

Purpose: This study aimed to comparatively evaluate the stress distribution of bones surrounding the implant system to which both titanium and polyetheretherketone (PEEK) abutments are applied using a three-dimensional finite element analysis. Methods: The three-dimensional implant system was designed by the computer-aided design program (CATIA; Dassault Systemes). The discretization process for setting nodes and elements was conducted using the HyperMesh program (Altair), after finishing the design of each structure for the customized abutment implant system. The results of the stress analysis were drawn from the Abaqus program (Dassault Systèmes). This study applied 200 N of vertical load and 100 N of oblique load to the occlusal surface of a mandibular first molar. Results: Under external load application, the PEEK-modeled dental implant showed the highest von Mises stress (VMS). The lowest VMS was observed in the Ti-modeled abutment screws. In all groups, the VMS was observed in the crestal regions or necks of implants. Conclusion: The bones surrounding the implant system to which the PEEK abutment was applied, such as the cortical and trabecular bones, showed stress distribution similar to that of the titanium implant system. This finding suggests that the difference in the abutment materials had no effect on the stress distribution of the bones surrounding implants. However, the PEEK abutments require mechanical and physical properties improved for clinical application, and the clinical application is thought to be limited.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.202-209
• /
• 2021

Natural dyes are more expensive than synthetic dyes and the dyeing process, which is mainly immersion of dye, is complicated. For this reason, relatively small-scale production methods were predominant. However, awareness and interest in environmental sustainability is rising globally, and the use of synthetic dyes causes various environmental problems such as wastewater and CO₂ emission, so the consumption of natural dyes is increasing. In addition, interest in digital textile printing, an eco-friendly dyeing method that can produce products of various designs and uses less water, is growing. In this study, natural indigo dye (Indigofera tinctoria) was used as a raw material for Digital Textile Printing ink, and ¹⁴C (Biocarbon) present in it was measured to confirm whether it was derived from natural ingredients. The performance was confirmed by testing the pH, viscosity, electrical conductivity, surface tension, and particle size analysis of natural indigo ink. In addition, the performance of natural indigo DTP ink and printing fabric was evaluated by inspecting the change in color fastness and corresponding index substances before and after digital printing with natural indigo DTP ink on textiles. Through this, the possibility of commercialization of DTP ink and printing fabric using natural indigo was confirmed.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.191-201
• /
• 2021

In this study, an eco-friendly indigo reduction system(scale up reduction, use of buffer solution, and pH control) using baker's yeast(Saccharomyces cerevisiae) was applied for natural indigo(Polygonum tinctorium) dyeing of Hanji fabric and Hanji-mixture fabric(Hanji/Cotton, Hanji/Silk). The effect of concentration of baker's yeast, repeat dyeing, and bath reuse was investigated in terms of dye uptake indicating reduction power. And the oxidation-reduction potential(ORP) was monitored. We also evaluated color properties and colorfastness according to the color strength. The yeast concentration did not significantly affect the maximum reduction power. However, the highest yeast concentration was effective in improving the initial dye uptake, and its the reduction retention power was the most excellent. Even on the last reduction day, the effect of increasing the dye uptake by repeat dyeing was observed. And it was confirmed that the reduction bath could be reused for up to 30 days by supplementing yeast at the end of reduction. For all the fabrics used, deeper and darker PB color were obtained by repeat dyeing. As dyeing was repeated, purplish tint got stronger on the Hanji/Silk fabric compared to other fabrics. Regardless of the composition of Hanji fabrics and color strength, washing and dry cleaning fastness were relatively good with above rating 4-5, and fastness to rubbing and light were acceptable with a rating 3-4 ~ 4-5. The eco-friendly natural indigo dyeing process using niram and baker's yeast would offer global marketability and diversity of Hanji product as a sustainable high value-added material.

• 근관절건강학회지
• /
• 제30권1호
• /
• pp.1-14
• /
• 2023

Purpose: This study aimed to develop Humanitude care educational program and validate its effects with a sample of third-year nursing students, thereby providing fundamental data for the application of the program to the education of gerontological nursing. Methods: Humanitude care comprised four strategies and five steps for the elderly. In this study, the Humanitude care educational program for nursing students was developed according to ADDIE process. And then, a non-randomized control group pretest-posttest design was adopted to identify the effects of the Humanitude care educational program. The intervention group with 22 third-year nursing students completed the Humanitude care educational program and then participated in clinical practice for 3 weeks. The 25 third-year nursing students in the comparison group participated in clinical practice without taking educational intervention. Differences between the intervention group and control group on Humanitude care knowledge, attitude toward the elderly, patient-centered communication, and care efficacy were analyzed with t-tests. Results: After completing the Humanitude care education, the intervention group showed significantly high scores in Humanitude care knowledge (t=8.82, p<.001), patient-centered communication (t=2.54, p=.015), and care efficacy (t=2.14, p=.040) than the control group. However, after finishing clinical practice, there were no significant differences in all variables between the intervention and control groups. Conclusion: Humanitude care educational program can be adopted as an effective intervention in Humanitude care knowledge, patient-centered communication, and care efficacy of nursing students. However, to continue the educational effect, instructors should facilitate nursing students applying Humanicide care in clinical practice. Ultimately, it can propose a novel educational direction that can be applied to human-centered care in gerontological nursing practice.

• 천문학회보
• /
• 제46권2호
• /
• pp.76.3-77
• /
• 2021

GMT secondary mirror system consists of 7 segmented adaptive mirrors. Each segment consists of a thin shell mirror, actuators and a reference body. The thin shell has a few millimeters of thickness so that it can be easily bent by push and pull force of actuators to compensate the wavefront disturbance of light due to air turbulence. The one end of actuator is supported by the reference body and the other end is adapted to this thin shell. One of critical role of the reference body is to provide the reference surface for the thin shell actuators. Therefore, the reference body is one of key components to succeed in development of GMT ASM. Recently, Korea Research Institute of Standards and Science (KRISS) and University of Arizona (UA) has signed a contract that they will cooperate to develop the first set of off-axis reference body for GMT ASM. This project started August 2021 and will be finished in Dec. 2022. The reference body has total 675 holes to accommodate actuators and 144 pockets for lightweighting. The rear surface has a curved rib shape with radius of curvature of 4387 mm with offset of 128.32mm. Since this reference body is placed just above the thin shell so that the front surface shape needs to be close to that of thin shell. The front surface has a concave off-axis asphere, of which radius of curvature is 4165.99 mm and off-axis distance is about 1088 mm. The material is Zerodur CTE class 1 (CTE=0.05 ppm/oC) from SCHOTT. All the actuator holes and pockets are machined normal to the front surface. It is a very complex challenging optical elements that involves sophisticated machining process as well as accurate metrology. After finishing the fabrication of reference body in KRISS, it will be shipped to UA for final touches and finally sent to Adoptica in Italy, in early 2023. This paper presets the development plan for the GMT ASM Reference Body and relevant fabrication and metrology plans.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.25-26
• /
• 2021

Due to COVID-19, the spread of non-face-to-face culture is increasing the time spent indoors. Accordingly, it is necessary to reduce indoor air pollutants. Also, among building materials, there are paints. As the number of coatings increases, the coating film becomes thick, and there is a risk of cracking and falling off. Therefore, this study is to examine the adsorption properties of indoor air pollutants according to the number of coatings of a paint mixed with powdered activated carbon. In the experimental plan, the addition ratio of powdered activated carbon was selected as 30%, and the number of coatings was selected as primcoating, second coat, and finishing coat, and the concentration of formaldehyde and volatile organic compounds were measured. As a result, as the number of coatings increased, the concentration of formaldehyde and volatile organic compounds tended to decrease. This is considered to be due to the fact that not only the physical adsorption acted by the internal pores of the powdered activated carbon, but also because a lot of powdered activated carbon was present on the painted surface as the coating film was formed. However, since it is judged that there is an error in the concentration due to the inflow of external air as the chamber cover is opened to put the test object in the adsorption test process, it is considered that the experimental method needs to be supplemented.

• 한국염색가공학회지
• /
• 제35권3호
• /
• pp.159-168
• /
• 2023

Polyolefin elastomer (POE) is widely used in a variety of applications, particularly in the manufacture of composites, due to its excellent mechanical properties, chemical resistance, and flexibility. However, POE has a high processing temperature, which causes damage to the fiber during the manufacturing process when impregnating the fiber. Therefore, ethylene vinylacetate (EVA), which has a low melting point and excellent adhesion properties, is blended with POE to reduce the processing temperature, and POE-g-MAH (Polyolefin elastomer-grafted-maleic anhydride) is used as a compatibilizer to further improve the POE/EVA blend properties. The compatibility of POE/EVA blends is observed by SEM, and the interaction between each polymer is confirmed by DSC and FT-IR. In addition, the effect of adding the compatibilizer is analyzed through mechanical properties such as tensile strength and elongation. The optimal content of compatibilizer for POE/EVA blends considering physical properties and moldability is sought, and 20 phr is determined to be the most appropriate.

• 한국염색가공학회지
• /
• 제17권2호
• /
• pp.31-39
• /
• 2005

This study was conducted to remove the dyes in dye wastewater by the chemical precipitation or biological treatment which are one of the main pollutants in dye wastewater. In order to remove the disperse dyes effectively in aqueous solution by chemical precipitation process, coagulation and flocculation tests were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(DB79), and we could get the best result for the removal of disperse dye(DB56) in the aspects of TOC removal efficiency and sludge yield. When the Ferrous sulfate dosage was 800mg/l, the sludge settling velocity was very fast$(SV_{30}=4\%)$, and the color was effectively removed in the disperse dye(DB79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge yield decreased in comparison with the Ferrous sulfate or the Ferric sulfate being used in the disperse dye(DB56) solution. In order to decolorize disperse dye(DR17) by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. The optimal culture conditions of temperature and pH were found to be $40^{\circ}C\;and\;8.5\~9$, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest$(93\%)$ among the nitrogen sources. The strain screened was excellent to adjust to pH, and it seems to have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_{4.}\cdot7H_2O\;and\;KH_2PO_4$ were $0.1\%(w/v)\;and\;0.2\%(w/v)$, respectively. Strains degrading and decolorizing reactive dyes, RB198 and RR141 which were isolated from water system, are named RBK1 and RRK. And the cell growth characteristics of RBK1 and RRK were investigated. The optimal culture conditions of temperature and pH were found to be 30t' and 7.0, respectively. Optimum nitrogen source was peptone, and it was found that decolorization efficiencies by strains RBK1 and RRK, were $85\%\;and\;62\%$, respectively, with introduction of 4,000mg/l of peptone. In the case of RBK1, color removal efficiencies were very high below 400mg/l. Decolorization efficiency was over $90\%$ at 20hours of culture time. The Color degradation ability of RRK was lower than that of RBK1.

• 대한한의학원전학회지
• /
• 제3권
• /
• pp.280-398
• /
• 1989

The most distintive features on the Thinking Structure of the Views of the Nature and the Theories of the Medicine of the ancient Chinese are a Comprehensions to the System of the Nature which reveals in the Natural Phenomena. Nothing doesn't changed in the Nature and man also. These Changes are inevitable to the man. So it isn't easy to grasp the Essence of the Natural Phenomena which always be changed. I-Ching (易經, Book of Changes), Chung-Yung (中庸) and many other books are that has a theories about the Changes, the ancients could recognized the unchangeable constancy from the ever changeable Natural Phenomena. The unchangeable constancy on the Oriental thinking means as same as an 'Idea' on the Western thinking. These process made them shape up the Views of the Nature and the Medical theories. And Chi (氣), Yin-Yang (陰陽) and Wu-Hsing (五行) are the most important concepts of their views and theories. In the concepts of Chi as an epistemological meaning; the Nature and the Han can be appreciated as a one System, because his being is within the Changes of the Nature and should be in accord with those Changes. He was going to believe that all beings are exist as an existential rules of himself. So Chi can be thougt as an epistemological system to all beings' existence. Thinking of Yin-Yang as a existential meaning; all beings are exist having a contrary and a complementary to each other. Birth and Death, Be ginning and Finishing in a series of the process occurs in all beings are the two sides of their existential and intrinsic tendencies. That can be condensed to the Yin-Yang concepts. In the consideration of Wu-Hsing;all beings are observed and explained more deliberatively by it's own rules. By the way the concepts of Chi, Yin-Yang and Wu-Hsing which derived from the processes of the recognition to the Changes of the Nature are practiced actually by the thoughts of Harmony. And it is represented by the accordance to the Time of the Natural Changes, that is, Shiling (時令). It means a adjustments to the Time and Changes of the Nature. The health of all beings that is an aim of the Medicine can be maintained by their practical thoughts or the concepts of Shiling.

• 환경영향평가
• /
• 제24권6호
• /
• pp.549-560
• /
• 2015

농공단지에 입주제한된 31개 업종의 업종별 배출특성에 따른 화학적 유해성을 근거로 업종별 환경영향을 계량화하여 입지규제 우선순위을 도출하였다. 농공단지에 입주제한된 31개 업종의 환경상의 악영향과 환경기술발전에 따른 환경유해성 저감을 동시에 고려한 합리적 토지이용 관리방안을 수립하기 위하여 업종별로 수계, 토양 및 대기의 매체별 배출량 및 배출물질 $LC_{50}$ 자료에 의해 산정된 인체위해성과 생태위해성을 노출평가와 독성평가로 분석하는 화학적 등급화기법(CRS : Chemical Ranking and Scoring System)에 PRTR (Pollutant Release and Transfer Registers) 자료를 활용하였다. 농공단지 폐수배출관련 31개 업종에 대한 환경유해성을 도출한 결과에 의하면 2012년 기준으로 도금 착색 및 기타 표면처리강재 제조업, 생물학적 제제 제조업, 동 제련정련 및 합금 제조업, 솜 및 실 염색가공업, 그외 기타 1차철강 제조업, 기타 비철금속 압연압출 및 연신제품 제조업 등 6개 업종은 환경영향 점수가 상대적으로 낮게 산출되어 제조공정상에서 특정수질유해물질을 배출허용기준 이하로 배출된다고 인정하는 경우에 농공단지 입주제한을 완화시킬 수 있는 업종으로 평가된다.