• Transactions on Electrical and Electronic Materials
• /
• v.6 no.3
• /
• pp.128-132
• /
• 2005

In this paper, we have investigated the characteristics of the magnetic abrasive using sludge on polishing of internal finishing of seamless stainless steel (STS304) tube applying magnetic abrasive polishing. Either white alumina (WA) or green carborundum (GC) grain was used to resin sludge at a low temperature, and the sludge of magnetic abrasive powder was synthesized and crushed into 200 meshes. Surface roughness was measured before and after polishing, and more than $40\%$ of improvement of surface roughness was achieved when WA grain was used under a specific condition. Even though some degree of surface roughness due to deeper scratches still exist, but the result showed a prospective magnetic abrasive polishing using sludge with WA or GC grains.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.277-280
• /
• 2005

Epoxy-mortar composites have been wildly used as finishing and repairing materials in the construction because of their excellent properties. Conventional epoxy-mortars and concretes have an inferior applicability and cost performance ratio due to the two component mixing of the epoxy resin and hardener. In this study, we examined the engineering effect of compressive strength and flexible strength according to the various epoxy-hardener in underwater and humidity environment, and evaluated the hardener types and physical effect of Epoxy mortar using cement binder in underwater and air condition. In this study, it was clarified that the engineering properties of repairing epoxy-motars were effected by the type of hardener.

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.2
• /
• pp.1-9
• /
• 2016

Vernacular perspectives had been ignored in the movement of modern architecture. This study's purpose was to review vernacular perspectives and to identify vernacular characteristics of earth architecture. Six representative contemporary earth architects were selected, and then their works were analyzed. Themes of vernacular architecture based of Frampton's critical regionalism were emerged. Findings were as following: 1) constructed by considering the local climate and the region's natural characteristics, 2) constructed with local materials seeking integration of structure and finishing work, 3) having tectonic form included regional characteristics, 4) creating space of various senses and expression of texture through earth modeling, 5) presenting homogeneity of sense of place between site and architecture, and 6) pursuing ecological and sustainable architecture. These characteristics of contemporary earth architecture reflect the vernacular architecture inherited continually in architectural history. Therefore, contemporary earth architecture has been in line with contemporary architecture aiming for sustainability.

• Korean Institute of Interior Design Journal
• /
• no.30
• /
• pp.35-41
• /
• 2002

The purpose of this study was to examine the current interior conditions of internal medicines and the patients'responses to them. Data were collected through questionnaire survey including observations and interviews. The sample consisted of 43 internal medicines in Busan. The data were analyzed by using SPSS-PC. The major findings were as follows: (1) Most of the medicines had a size of 20-50 pyung(66-165$m^2$). The preferred size of internal medicine was 30-70 Pyung. (2) The typical layout of reception room, doctor's room, and injection room was L shape. (3) The most preferred room was waiting room and the worst one was injection room. (4) Painting and tile were mostly used as interior finishing materials. The patients preferred wall papers as wall and ceiling material, and marbles as floor material. Also, the most preferred interior images were modern, western, urban, open, simple, warm and popular images.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.153-156
• /
• 2004

As architects and interior designers work farther and farther afield, so the connection of buildings to the particular place they are constructed becomes increasingly. Also, during the past twenty years they have made a habit of asking probing and often uncomfortable questions about how architectural conventions force patterns of behavior. In place of bricks and mortar, they have mixed store, office, clinic, and residence. In this project, the buildings consist of pharmacy, store, dental clinic, oriental clinic and residence. This building was designed by architect to have panoramic views. The view of surrounding road from every wall becomes a constant point of reference, a back drop against which the whole house revolves. Now, all the words can be suitable for describing the oriental clinics. But the oriental clinics of these days may construct the unintentional common image, may be because of the clients sense about the finishing materials or colors in vogue. The Importance of identity in the design of oriental clinic becomes higher increasingly, and with the same reason, the conviction of interior designer.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.169-172
• /
• 2004

The purpose of this study was to identify the searching method and application of intoner design trend of interior designer. The questionnaire survey were used. The subjects of questionnaire survey were 50 interior designers in 6 interior design firms. Frequency, percentage, and cross-tab were used for data analysis. The major results were as follows. 1) Interior designers thought that consumers visiting at apartment model house were concerned about interior design trend and aware of interior design reflected trend. So interior designer gave expression to interior design trend. And they needed information about interior design trend and consumer's interior design preference. 2) Interior designers found interior design trend or consumer's preference from some exhibition or fair, journal, and internet materials. 3) Interior design trend was mainly expressed in living room design. And Interior designers utilized finishing material and color in expression of interior design trend.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.57-58
• /
• 2014

For durability design to protect against chloride-induced corrosion, it is important to estimate the amount of chlorides on the surface. However, it is difficult to estimate the airborne chlorides, a boundary condition, due to the difference between the amount of chlorides attached to a surface of an actual structure and that in the air. Therefore, in this study the attachment rate analysis of airborne chlorides was evaluated for 13 types of finish materials. As a result, despite differences in the amount of airborne chlorides according to the finishing type, it was found that 60 percent of airborne chlorides were attached to mortar, 30 percent were attached to steel, and 25 percent were attached to tiles compared with the amount of chlorides in the air.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.115-119
• /
• 2005

This study is to examine changes since autonomy of lotting-out price of apartment house and planning factors related to sale of apartment house through leaflet of sale of apartment house. Objects of the study were leaflets of sale of apartment houses through the Donga Il Bo daily newspaper from 2001 to 2003. The results of research can be summarized to three. First, traffic of locational factors in advertisement of sale of apartment house showed the highest frequency and it was found that it was an important planning factor of apartment house. Second, considering that advanced facilities and the highest finishing materials were used, quality of apartment house has been advanced. Third, considering that community space, theme park and green zone showed high occupancy in external space, there has been high increase in external space as well as in internal one since autonomy of lotting-out price.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.2
• /
• pp.111-118
• /
• 2003

Steel frame construction is divided into subsidiary materials with column, beam, girder and bracing. After these are processed in factory for using installing in construction field. These prefabricated furniture is very important in accordance with design drawing about processing and prefabricating. In the case of design process using information transmission in blueprint, omission of material number, processing measure and finishing material, or discordance of each structure drawing and selecting incongruent structural material generated an error in the process of design. These error caused delaying time and increasing cost and increasing safety accident in the steel-structure work operating process. therefore, design process should consider problem of operating process.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.97-104
• /
• 1995

The photochromic dyes(spiroxazine) as a susceptible material were synthesized by condensing 1-nitroso-$\beta$-naphthol with piperidine. The melting point of the synthesized spiroxazine dye was 245$^{\circ}C$. Irradiation with ultraviolet light had effect on reversible coloration reaction. The photochromic dye microcapsules were produced by interfacial precipitation method using polyvinylalcohol and ethylcellulose. The average diameter of microcapsules was 5.4$\mu$m. The dyeability and fastness of dyeings of the microcapsule fibers were increased by pretreatment of the cationic agent.