• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.69-76
• /
• 2017

To get the proper treatment conditions, sulfonation reactions of persimmon tannin with sodium sulfite and sulfuric acid were proceeded in various settings, respectively. Also, the property changes were investigated by carrying out the additional analysis: elementary analysis and instrumental analysis using FT-IR, DSC, and TGA. The degree of $-SO_3Na$ substitutions appeared 0.216 and 0.208 under the treatment time of 3 hours and 6 hours, respectively and the degree of $-SO_3H$ substitutions indicated 0.200 and 0.167 under 9 hours and 18 hours, respectively by elemental analysis. In terms of the FT-IR spectras, there was a peak based on the bonds of pyran ring and ether in relation to non-treated and sulphonated tannin at $1,102cm^{-1}$. No peak was shown in the sulfited tannin. An absorption peak which was due to the $C{\rightarrow}O$ of secondary -OH group became evident in nontreated and sulfited tannin at $1,092cm^{-1}$ and $1,090cm^{-1}$, respectively but the same result was not found in sulphonated tannin. The results of TGA analysis of the sulfonated persimmon tannin showed that the sulfonation of it improved thermal properties.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.231-237
• /
• 2016

This article reports a new chemical bath for preparing a mirror-like surface of AZ31 Mg alloy. In order to find an appropriate chemical polishing solution, four different acidic solutions of sulphuric acid, nitric acid, acetic acid and a specially designed mixture of nitric acid and acetic acid were investigated in view of the changes in surface appearance, roughness and dissolution rate of AZ31 Mg alloy. The surface scales on AZ31 Mg alloy were readily removed by all the acidic solutions, but a reflective surface was produced only by etching in the specially designed solution, and only after a specific etching time. The surface roughness increased with etching time in sulphuric acid, nitric acid, and acetic acid, but it lowered after a specific etching time in the specially designed mixture of nitric acid and acetic acid. Dissolution rate of the alloy in the specially designed mixture of nitric acid and acetic acid appeared to be more than twice than that in separate nitric acid or acetic acid. In this work, we recommend the mirror-like surface of AZ31 Mg alloy obtained by polishing for an optimum time in a mixture of nitric acid and acetic acid for following surface finishings, chemical conversion coating, electroplating, electrophoretic painting and anodizing treatment.

• 한국건축시공학회지
• /
• 제9권3호
• /
• pp.87-94
• /
• 2009

Recently, in accordance with the interesting on well-being as well as the revitalization of living athletics, it is current tendency that people who use the swimming pools are on increasing. However, because the most of indoor swimming pools have ever used the reflection finishing materials likely as the tile due to the property of its hydrophilic space, the inside of indoor swimming pool is vibrating too much, and some problem which the voice and music do not delivering clearly is occurring when swimming lessons or underwater aerobics(synchronized swimming) and swimming game. Based on such viewpoint, locating the object on actually built indoor swimming pool, this Study has ever grasped its physical acoustic property, and finally designed the indoor swimming pool that contains an optimum acoustic condition, by remodelling it through an acoustic simulation. It is considered that such study result could be utilized as the useful materials when constructing the similar indoor swimming pool, hereafter.

• 한국건축시공학회지
• /
• 제18권6호
• /
• pp.559-567
• /
• 2018

외단열 마감 공법에서 사용되는 바탕조정재는 화재가 발생하는 경우 얇은 마감과 폴리머의 연소로 인해 표면부가 급속하게 붕괴되어 화재에 취약한 소재이다. 본 연구에서는 열적 성능이 우수한 팽창 흑연을 사용할 경우 바탕조정재의 성능을 개선할 수 있을 것으로 기대하였다. 실험결과, 팽창흑연을 사용한 바탕조정재는 부착강도 저하 및 물흡수계수 등의 감소가 발생하는 문제점이 있으나 플라이애시와 실리카흄을 사용하여 물리적 성능이 향상되는 것으로 나타났다. 팽창흑연을 사용한 바탕조정재는 복합 단열 시험체 표면의 페놀폼은 화염에 의한 표면 뚫림이 나타나지 않아 열원의 투과를 감소시킬 수 있을 것으로 나타났다.

• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.131-140
• /
• 2021

Collagen and chitosan are used in medical and cosmetic materials as natural polymers. In order to utilize the advantages of the materials, collagen/chitosan conjugated wet-spun fibers were prepared. The analysis of surface, optical, thermal and mechanical properties was carried out on the various composition of collagen and chitosan. As a result of images analysis, it was verified that the collagen/chitosan conjugated fibers were stably spun. In addition, the optical and thermal properties of fibers were observed to be changed by hydrogen bond. As a result, an optimized composition could be found at an appropriate content. Moreover, the optimized fibers have mechanical properties similar to chitosan fibers, while improving the structural and thermal stability by its hydrogen bond. In addition, the wet-spun collagen/chitosan conjugated fibers can be applied to medical and various fields through mechanical properties according to content control.

• 한국염색가공학회지
• /
• 제33권2호
• /
• pp.64-71
• /
• 2021

Large amount of formaldehyde could be released inevitably during the flame-retardant (FR) treatments or from the finished fabrics using Provatex reagent and Proban polymers which have been used as durable FRs for cotton. A water-soluble cyclophosphazene derivative was synthesized as an ecofriendly phosphorus-based FR for cotton fibers. Dichloro tetrakis{N-[3-(Dimethylamino)propyl]methacrylamido} cyclcophosphazene (DCTDCP) was synthesized through the substiutution reaction of Hexachloro cyclophosphazene and N-[3-(Dimethylamino)propyl] methacrylamide at a mole ratio of 1 : 4, which can be cured dually by both alkaline treatment and UV irradiation. More crosslinked networks were produced through the addition of Triacryloyl hexahydrotriazine and Acrylamide as a UV-curable crosslinker and a comonomer respectively. Both flame retardancy and washing durability of the FR cotton were improved synergistically. The durability improvement may be caused by the covalent bond formation of the FR with cellulose and the high degree of polymerization of DCTDCP, which can be verified by the pyrolysis and combustion behaviors analyzed by LOI, TGA, and microcalorimeter.

• 한국염색가공학회지
• /
• 제33권1호
• /
• pp.40-47
• /
• 2021

As modern society develops, it becomes very complex and diverse, and interests in the convenience of life and the natural environment are gradually increasing. Products used in our daily life are also changing according to the needs of consumers, and food packaging is one of them. In particular, retort packaging materials have been used for the purpose of long-term preservation of contents, but the appearance of products suitable for recent environmental issues has been somewhat delayed. Therefore, in order to develop eco-friendly and human-friendly products by replacing the metals used in the existing retort packaging materials, the possibility of substitution was examined using cellulose nanofibers, a natural material. As a result, it can be seen that all functions can be replaced according to the existing long-term storage characteristics for retort packaging films. In particular, not only oxygen permeability and water vapor permeability, which are one of the most important factors, but also heat resistance, which is heating durability, is evaluated as applicable to commercialization compared to products using metals currently in use.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.41-48
• /
• 2018

Carbonation is one of the major detrimental factors to the reinforced concrete structures owing to penetration of atmospheric CO2 through the micro pores, thereby it reduces the durability of the concrete. The maintenance periods and cost for concrete according to the coefficient variation of different finishing materials is documented in literature. However, it is required to carry out the systematic and well planned studies. Therefore, keeping them in mind, surface repair was carried out to the carbonated concrete and the maintenance cost was calculated to measure the durability life after repair with different variable. The deterministic and probabilistic methods were applied for durability and repair cost of the concrete. In the existing deterministic model, the cost of repair materials increases significantly when the concrete structure reaches its service life. In present study using a stochastic model, the maintenance period and cost was evaluated. According to obtained results, there was no significant difference in the number of maintenance of the coefficient variation. The initial durability has a great influence on the maintenance time and cost of the structure. Unlike the deterministic model, the probabilistic cost estimating model reduces the number of maintenance to the target service life expectancy.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.230-237
• /
• 2021

The flame-retardant (FR) treatments of wool fibers using Hexafluorozirconate/titanate salts and tetrabromophthalic anhydride can cause skin irritation and gas toxicity due to Zr and Br compounds respectively. A water-soluble polyfunctional cyclophosphazene derivative, synthesized through substitution reaction of Hexachloro cyclophosphazene and N-[3-(Dimethylamino)propyl] metacrylamide, was applied as a durable flame-retardant for wool fabrics. Also, a crosslinked structure was introduced to improve washing durability of the FR-wool, up to 10 laundering cycles, using Acrylamide(AAm) and Triacryloylhexahydrotriazine (TAHT) as a comonomer and a crosslinker respectively. The mole ratios of the TAHT and AAm concentrations compared to the Dichloro tetrakis{N-[3-(Dimethylamino)propyl]methacrylamido} cyclcophosphazene (DCTDCP) were optimized to 1.33 and 7.5 respectively. In addition, the pyrolysis and combustion properties of the FR wool were assessed using LOI, TGA and microcalorimetry suggesting a solid-phase FR mechanism.

• 한국염색가공학회지
• /
• 제35권1호
• /
• pp.29-41
• /
• 2023

This study is about a hybrid lightweight cowl crossbeam structure with high rigidity and ability to absorb collision energy to support the cockpit module, which is an automobile interior part, and to absorb energy during a collision. It is a manufacturing process in which composite material bracket parts are inserted and injected into existing steel bars. When considering the mounting condition of a vehicle, the optimization of the fastening condition of the two parts and the mechanical properties of the composite material is acting as an important factor. Therefore, this study is about a composite material having a volume content of Polyamide(PA) and Glass Fiber used as a composite material for a composite material-metal hybrid cowl crossbeam. As a result of analyzing the physical properties of the PA/GF composite material, experimental data were obtained that can further enhance tensile strength and flexural strength by using PA66 rather than PA6 used as a base material for the composite material. And based on this, it contributed to securing the advantage of lightening by using high-stiffness composite material by improving the high disadvantage of the weight of the cowl crossbeam material, which was made only of existing metal materials.