• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.396-406
• /
• 2011

Execution of the finish work for high-rise residential construction occurs when a mixture of work progresses simultaneously at each floor or sector and is carried on by highly-specialized subcontractor teams. Therefore, the finish work plan requires an effective scheduling method that interfaces between the work and the teams. In order to address these issues, the TACT technique is utilized in Korea. This technique is based on Line-of-Balance and Lean construction. However, according to recent case studies, finish work using TACT technique was frequently delayed with cost overruns because the work was performed without a detailed schedule control plan outlining the relationship between architecture and mechanical, electrical, and plumbing work. This paper describes the enhanced-TACT technique which provides a detailed work flow chart and TACT work template. With improved TACT technique, this paper will contribute to improved cash flow and reduced cycle time and provide quality improvement through work continuity.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.31-39
• /
• 2007

The purpose of this study was to observe the kinematic pattern of elite women 100m hurdler race from start to finish and analyze how the change of horizontal velocity makes an influence on the athletes' performance. The analysis was based on the performance of Korean elite 100m hurdler A and international elite hurdlers B and C. Following results were drawn from the analyzation of elite 100m hurdlers' technical characteristics; During the race, hurdler A made more than 8 m/s of horizontal velocity at the 3rd, 4th, 6th, and the 7th hurdle. The horizontal velocity peaked at the 4th hurdle with 8.23 m/s. On the other hand, hurdler B and hurdler C maintained more than 8 m/s of horizontal velocity from the 2nd hurdle through the 10th hurdle. Hurdler B's fastest horizontal velocity was 8.67 m/s from the 6th to the 7th hurdle and hurdler C's fastest horizontal velocity was 8.85 m/s from the 5th to the 8th hurdle. From the start line to the 3rd hurdle, the times achieved by hurdlers A, B, and C were 4.90 sec, 4.65 sec, and 4.52 sec. In the middle of the race, which is from the 4th hurdle to the 7th hurdle, hurdlers A, B, and C ran in 9.10 sec, 8.60 sec, and 8.38 sec. And the latter part of the race to the 10th hurdle, the times hurdlers A, B, and C hit were 12.32 sec, 11.66 sec, and 11.32 sec. To the finish line, it took 1.15 sec for hurdler A, 1.1 sec for B, and 1.06 sec for C. Hence, to set the record of sub-13 sec, hurdler A should improve her acceleration from the start line to the 1st hurdle with the speed more than 5.4 m/s and should maintain more than 8 m/s of horizontal velocity from the 2nd hurdle through the 10th hurdle. In addition, hurdler A should improve her speed endurance to minimize the deceleration of horizontal velocity from the 4th hurdle to the final hurdle. If hurdler A could shorten 0.05 sec of time in each hurdle section, she would be able to set the record under 13 seconds.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.149-156
• /
• 2007

The purpose of this study was to compare the world class women's hurdlers with kinematic variables Lee Yeon-Kyoung's in the 100m hurdle. Among korea elite female hurdler, Lee Yeon-Kyoung was participated as a subject. Eight JVC video cameras(GR-HD1KR) were used to film the performance of Lee Yeon-Kyoung at a frame rate of 60fields/s. The real-life three-dimensional coordinate data of digitized body landmarks were smoothed using a fourth order Butterworth low pass recursive digital filter with an estimated optimum cutoff frequency of 7.4Hz. After analyzing and comparing Lee Yeon Kyung's kinematic variables with the world top class hurdlers in the woman's 100m hurdle run, the following conclusions were obtained. 1. Lee should be able to increase the speed with over 5.4m/s from start to first hurdle and then maintain the speed range from 8.33m/s to 8.67m/s until 10th hurdle. Lee should have to maintain the speed with 8.51m/s from 10th hurdle to finish line. 2. Lee has to reach her maximum running speed at 5th hurdle and then has to shorten running time with 0.5sec between hurdles. 3. Lee should be able to run around 2.5sec from start to frist hurdle and then maintain under 1.00sec following phases. Lee should be able to maintain under 1.10sec from 10th hurdle to finish line. 4. Lee needs to control a consistent takeoff and landing distance pattern, Lee needs to lower the height of the center of gravity of the body with 0.33m when she clears the hurdles.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.694-704
• /
• 1988

본 연구에서는 현장에서 흔히 수행되는 가공 후(post-process) 측정만을 이용 한 단일절삭(single-pass)으로써 공작물이 원하는 일정한 직경을 유지할 수 있다는 것 을 실험을 통해 검증해 보이고자 한다. 이와 같은 방식은 이미 보오링 작업 중 보오 링바의 노출 길이 변화에 따른 가공면의 내경 오차를 없애주기 위한 방법으로써 제시 된 바 있다. 즉 반복 최소 자승법(recursive least squares)으로 미리 가정된 절삭 조건과 공작물 처짐 사이의 관계식과 관련된 계수를 가공 후에 가공 공작물의 표면 측 정으로 매 번보정(update)시켜 줌으로써 일정 직경을 얻기위한 절삭조건을 결정하고자 한다.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1597-1603
• /
• 1995

A prediction model on forward slip has been developed for presetting rolling speed of each finish mill stand in the continuous hot strip roduction. Those factors such as neutral point, friction coefficient, volume fractions undergoing width spread, shape of deformation zone at each side of entry and delivery of the rolls were taken into account. To reduce the speed unbalance between adjacent stands a refining method of adjusting friction coefficient has also been developed. On-line application of the model showed a good agreement in rolling speeds between the predictions and the actual measurements, and gave an outstanding improvement in the travelling stability of strip passing through the finishing mill train.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.219-223
• /
• 1999

A new additive for semi-brightness finish in nickel electroplating, having a quarternary ammonium salt structure, has been developed in this study. The effectiveness of the new additive was tested in laboratory-scale eletroplating tests as well as in a full-scale factory plating line. An examination of the plated surface showed that the new additive is as good as the one produced by the most commonly used additive in the nickel plating industry. The plated surface was examined by SEM, EPMA, and Reflectance Spectroscopy, and was found to be compatible to the one obtained with commercial additives. The new additive has a shelf life comparable with those of other commercially available additives. The additive developed in this study has an excellent potential to be used commercially.

• 대한건축학회논문집:구조계
• /
• 제33권12호
• /
• pp.91-98
• /
• 2017

In this study, the effect of window installation position in the residential building with the external insulation was numerically investigated in terms of insulation performance and heating/cooling energy consumption. For different window positions, 2-D heat transfer simulation was conducted to deduce the linear thermal transmittance, which was inputted to the dynamic energy simulation in order to analyze heating/cooling energy consumption. Simulation results showed that the linear thermal transmittance ranges from 0.05 W/mK to 0.7 W/mK, and is reduced as the window is installed near the external finish line. Indoor surface temperature and TDR analysis showed that the condensation risk is the lowest when the window is installed at the middle of the insulation and wall structure. It was also found that the window installation near the external finish can reduce the annual heating/cooling energy consumption by 12~16%, compared with the window installation near the interior finish. Although the window installation near the external finish can achieve the lowest heating/cooling energy consumption, it might lead to increased condensation risks unless additional insulation is applied. Thus, it can be concluded that the window should be installed near the insulation-wall structure junction, in consideration of the overall performance including energy consumption, condensation prevention and constructability.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.189-195
• /
• 2000

RP techniques have their unique characteristics according to the working principles : star-stepped surface of parts due to layer-by-layer stacking low build speed caused by line-by-line solidification to fish one layer and post processing to improve surface finish etc The objective of this study is to propose a new RP technique Variable Deposition Mnanufacturing (VDM) which can make up for the disadvantages of the existing RP techniques and to develop an apparatus to implement the technique. The proposed process can greatly reduce the build time and improve the surface finish of parts generated. Experiments are carried out to obtain the range of temperature of molten material to maintain its fluidity and to investigate the effect of gas cooling on the preservation of the slopes. Some simple shapes such as a line-shape an S-shape and a circle-shape are fabricated from Ethylene Vinyl Acetatecopolymer(EVA) In order to examine the applicability of VDM to more general shapes a tensile specimen and a yo-yo shape were manufactured by the proposed RP method using EVA material as a trial approach. The current basic study shows a high potential of practical use of the proposed VDM process to prototyping of a general three-dimensional shape.

• 대한정형외과스포츠의학회지
• /
• 제7권1호
• /
• pp.45-49
• /
• 2008

목적: 하프코스 마라톤 달리기 후에 체내의 생리적 변화를 관찰하여 휴식 기간에 따른 회복 양상을 확인하고자 한다. 대상 및 방법: 하프코스 완주자 13명( 남자 12명, 여자 1명)을 대상으로 하였으며, 평균 연령은 44세(범위: $38{\sim}54$)이었으며 신장은 평균 166 cm (표준편차 6.5), 몸무게는 평균 68 kg(표준편차 7.3)이었다. 생화학적 검사항목은 운동 후 근육 및 심장에 영향을 미치는 혈청효소인 aminotransferases (AST, ALT), CK-MB, Troponin-I 그리고 신장 기능 및 체내의 전해질 균형 상태를 확인할 수 있는 BUN, Creatinine, Na, K의 변화를 확인하였으며, 검사 방법은 출발 전, 완주 직후 및 2일 후, 완주 후 2주에 채혈하여 검사치의 변화의 양상을 확인하였다. 결과: 모든 검사 항목에 있어 측정 시점에 따른 측정 결과는 정상범위 내의 변화를 보였다. 측정 시점에 따른 유의한 변화를 보이지 않았던 검사항목은 ALT (p=0.914) 및 Troponin I (p=0.354)이었으며, BUN, Cr. Na. K등 신장 기능 및 체내의 전해질 균형상태를 반영하는 검사는 완주 직후 증가되었다가 2일 째에 출발전의 수치로 회복되었으며, 근육 및 심장에 영향을 주는 AST 및 CK-MB의 경우 완주 직후 증가된 수치가 2일째까지 유지되거나, 더욱 증가되었다가 2주 후 검사 상 출발전의 수치로 회복되는 양상을 보였다. 결론: 장거리 달리기를 한 후 탈수 현상으로 인한 초기 신장 효소 변화는 2일 정도에 회복이 되었으며, 근육 및 심장의 피로 효소는 약 2주 정도의 시간이 지나야 회복되었다. 따라서 하프코스마라톤을 뛴 후 정상적인 회복을 위해서는 음주경력, 흡연경력 및 달리기 경력에 상관없이 약 2주간의 회복기를 거치는 것이 필요할 것으로 생각되었다.

• 한국사회복지학
• /
• 제64권1호
• /
• pp.325-355
• /
• 2012

본 연구는 ADHD 아동을 양육하는 어머니들의 체험을 통한 본질의 의미를 탐구하고자 하였다. 면접은 2010년 4월부터 2011년 4월까지 약 12개월동안 14명의 ADHD 아동 어머니를 대상으로 2~3회에 걸쳐 현상학적 연구로 진행되었다. 그 결과 강점관점으로 본 ADHD 아동 어머니들의 양육경험의 본질은 '완주를 위해 자신과 싸우는, 원하지 않는 마라톤'을 위해 달려가는 것으로 해석되었다. 이러한 어머니의 강점관점으로서의 경험 본질은 '그래도 이쁜 내새끼와 함께하기 위한 힘을 찾아가는 여정'인 마라톤이었으며 그 경험은 시 공간적으로 8가지로 구성되었다. 처음 아이의 독특한 행동들을 겪으며 '혼란의 연속'속에서 'ADHD진단의 먹먹함'을 경험하지만 '엄마라는 운명'에 아이를 위한 총체적 노력을 기울이게 된다. 그 과정에서 '총알이며 은총인 선생님의 말'에 절망과 감사함을 경험하면서 엄마들은 원하지 않은 마라톤의 대열에 합류하게 된다. 포기할 수도 없는 완주를 향해 달려가는 외로운 전투를 하면서도 내아이를 위해, 나를 위해 '그래도 긍정적으로' 살기로 한다. 하지만 자식을 위해 자신을 독려하지만 쉬운 과정은 아니다. 그럼에도 아이로부터, 가족으로부터, 전문가들로부터 도움을 받으며 '버텨내는 힘'을 얻게 된다. 평범하지 않은 아이를 키우는 게 힘들고 '현재진행형이지만 그래도 이쁜 내새끼를 위하여' 오늘도 엄마는 아이와 함께 완주를 위해 달려가고 있는 것이다. '도착점'이 다시 '출발점'이 된다하더라도 달려갈 수밖에 없는 마라톤을 하고 있는 것이다. 이러한 경험적 근거를 기반으로 하여 ADHD 어머니와 아동을 위한 사회복지실천과제를 제언하였다.