• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.738-744
• /
• 2011

The reliability of blade root fixing section is required to endure the centrifugal force and vibration stress for the last stage blade of steam turbine in thermal power plant. Most of the domestic steam turbine last stage blades have finger type roots. The finger type blade is very complex, so the inspection had been performed only on the exposed fixing pin cross-section area due to the difficulty of inspection. But the centrifugal force and vibration stress are also applied at the blade root finger and the crack generates, so the inspection method for finger section is necessary. For the inspection of root finger, inspection points were decided by simulating ultra-sonic path with 3D modeling, curve-shape probe and fixing jig were invented, and the characteristics analysis method of ultrasonic reflection signal and defect signal disposition method were invented. This invented method was actually executed at site and prevented the blade liberation failure by detecting the cracks at the fingers. Also, the same type blades of the other turbines were inspected periodically and the reliability of the turbine increased.

• Culinary science and hospitality research
• /
• v.24 no.1
• /
• pp.39-49
• /
• 2018

In this study, the traditional takju was manufactured using the finger root, which was recognized as a health functional ingredient, and analyzed the physicochemical and sensory quality characteristics according to the period of fermentation. The pH was significantly low(p<0.05) in all samples until the second day of fermentation, and the pH tended to increase again from the third day of fermentation. The pH value was decreased as the amount of finger root was decreased(p<0.05). The acidity of takju was significantly lower at 0.17~0.21 immediately after fermentation(p<0.05). The acidity of FR0 showed significantly the highest value(p<0.05). The sugar content of takju was significantly increased in all the samples until the 2nd day of fermentation(p<0.05). On the 7th day, it showed the lowest value at $11.01{\sim}12.63^{\circ}Brix$. The sugar content of FR0 was significantly lowest value(p<0.05). The alcohol content of takju was significantly increased as the fermentation proceeded, and the highest value was 11.90~13.50% at 7 days(p<0.05). The alcohol content of RF0 was significantly higher than other samples(p<0.05). As a result of organic acid analysis of finger root takju fermented for 7 days, citric acid(3.35%) showed the highest content of FR3(p<0.05). The content of fructose increased with increasing finger root amount (p<0.05). As a result of sensory evaluation of finger root takju, FR1 and FR2 samples tended to be lower in score than FR0, and FR3 showed the highest score. The overall acceptance value of FR0 was 7.5 and FR3 was 7.57.

• BMB Reports
• /
• v.53 no.3
• /
• pp.160-165
• /
• 2020

The root meristem of Arabidopsis thaliana is protected by the root cap, the size of which is tightly regulated by the balance between the formative cell divisions and the dispersal of the outermost cells. We isolated an enhancer-tagged dominant mutant displaying the short and twisted root by the overexpression of ZINC-FINGER OF ARABIDOPSIS THALIANA1 (ZAT1) encoding an EAR motif-containing zinc-finger protein. The growth inhibition by ZAT1 was shared by ZAT4 and ZAT9, the ZAT1 homologues. The ZAT1 promoter was specifically active in the outermost cells of the root cap, in which ZAT1-GFP was localized when expressed by the ZAT1 promoter. The outermost cell-specific expression pattern of ZAT1 was not altered in the sombrero (smb) or smb bearskin1 (brn1) brn2 accumulating additional root-cap layers. In contrast, ZAT4-GFP and ZAT9-GFP fusion proteins were distributed to the inner root-cap cells in addition to the outermost cells where ZAT4 and ZAT9 promoters were active. Overexpression of ZAT1 induced the ectopic expression of PUTATIVE ASPARTIC PROTEASE3 involved in the programmed cell death. The EAR motif was essential for the growth inhibition by ZAT1. These results suggest that the three related ZATs might regulate the maturation of the outermost cells of the root cap.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.5
• /
• pp.354-361
• /
• 2018

Background: This study was conducted to investigate the growth characteristics, root yield and curcuminoid content of turmeric (Curcuma longa L.), cultivated using mother seed rhizomes (MR) and finger seed rhizome (FR) of different sizes. MR are attached to the stem, and FR are connected to the MR, and are used as a general seed rhizome. Methods and Results: Seed rhizomes of different types and sizes were used: large, medium and small for FR, and large, half-sized, and small for MR. These were assigned to the experimental groups and cultivated under greenhouse conditions. The growth characteristics, root yield, and curcuminoid content did not show clear difference between MR and FR, but suggest that the larger seed rhizomes (above 30 g) could have higher root yields. On average, harvested mother rhizomes (HMR) contained more curcuminoid than harvested finger rhizomes (HFR), while the yield of HFR was higher than that of HMR. The higher weight of harvested roots correlated significantly with elevated curcuminoid content. Conclusions: The two seed rhizomes, MR and FR, did not differ in root yield and curcuminoid contents, but larger seed rhizomes may produce better root yields. This suggest that the optimum seed rhizome is larger FR, to produce higher yields and quality in turmeric root production.

• Journal of the Korea Furniture Society
• /
• v.12 no.2
• /
• pp.1-10
• /
• 2001

As finger joint method has a high rate of yield and high strength and ease in working, it has been widely used as an end joint method for solid wood and wood based-material. Therefore, we end-joined the material of Pinus densiflora, Quercus variabilis and populus euramericana with polyvinyl acetate adhesive and resorcinol phenol resin adhesive. The effect of difference (0, 0.15, 0.3, 0.45mm) between the dimensions of tip width and root width of the finger (DTRW) on bending strength properties was as follows: 1. In the case of polyvinyl acetate adhesive, DTRW had no effect on bending modulus of elasticity(MOE) and modulus of rupture(MOR) of the three kinds of species, because their bonding layers were destroyed by slippage, not their woody parts. 2. In the case of resorcinol phenol resin adhesive, the material of Quercus variabilis showed an optimal result at 0.15 or 0.3 of DTRW, while the poplar did at 0 of DTRW 3. The differences in efficiency ratio of bending MOR of populus euramericana, Pinus densiflora and Quercus variabilis species according to the kind of adhesive were 13-29%, 23-30% and 45-53%, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.922-930
• /
• 2021

This study was attempted to investigate the availability of nipa palm (Nypa fruticans Wurmb.) and finger root (Boesenbergia pandurata) extracts as natural cosmetic ingredients. For this, O/W cosmetic formulations with different compositions were prepared. The appearance of the cosmetic formulations was compared, and brightness and color values were measured using a colorimeter. Also, the pH, viscosity, and texture of the cosmetic formulations with different compositions were measured, and the effects of the extracts on the properties of the cosmetic formulations were examined. Finally, the UV transmittance and sun protection factor (SPF) index were observed, and the results confirmed the availability of finger root extract as a natural ingredient for UV protection.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.6
• /
• pp.57-66
• /
• 2004

To study the efficient usage of small diameter logs and woods containing defects such as knots, slope of the grain and decay, six types of finger-jointed woods with various finger profiles were made of poplar, pine and oak with different density. We investigated the effect of finger profile on static bending strength performances of finger-jointed woods. The efficiency of bending MOE, MOR and deflection showed the highest value in poplar finger-jointed wood with the lowest density of three species, and the lowest value in oak finger-jointed wood with the highest density of three species. The values markedly decreased with increasing finger pitch for finger-jointed wood glued with polyvinyl acetate (PVAc) resin for all tested species, whereas for the finger-jointed wood glued with resorcinol-phenol formaldehyde (RPF) resin, the influence of finger pitch on the efficiency of MOE was not found in all tested species, and those on the efficiency of MOR and deflection indicated the same trend as finger-jointed wood glued with PVAc resin in the case of pine and oak finger-jointed wood with higher densities. It was found that the values tended to decrease with increasing density of species on the whole and the desirable finger pitches were L (6.8 mm) for poplar, M (4.4 mm) for pine and S (3.5 mm) for oak in a view of economy. For finger-jointed wood glued with PVAc resin, the fitness between a tip and a root width of a pair of fingers δ of 0.5 mm indicated the highest efficiency of MOE for all species. And, the influence of δ on MOR was only found in oak finger-jointed wood glued with RPF resin and the desirable δ value for oak was 0.1 mm. However, it was found that the influence of δ on the strength performance was very small.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.821-829
• /
• 2019

This study was conducted to evaluate the applicability of the extracts from nipa palm, molokhia, and finger root in functional cosmetics as a natural active ingredient. The extracts were obtained through the processes of heating under reflux with ethanol, filtration, concentration, and freeze-drying. UV absorption and blocking effects of the extracts were examined by using the UV-vis spectrophotometer equipped with an integrating sphere. Antioxidant activity and its stability between the extracts were compared using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging assay. Also, total polyphenol content in the extracts was determined quantitatively using the Folin-Ciocalteu reagent, with gallic acid as the standard. Antibacterial activity of the extracts was investigated by the disc diffusion test against Staphylococcus aureus (gram-positive) and Escherichia coli (gram-negative). Finally, collagenase inhibitor assay was performed to examine the anti-wrinkle effect of the extracts. From the results of this study, the extract of nipa palm showed the potential for use in cosmetics as an antioxidant and anti-wrinkle agent, and the extract of finger root as a sunscreen and antibacterial agent.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.172-178
• /
• 2011

Three different finger-jointed lumbers which have different geometric features and adhesives were manufactured and studied in this study. Larch and pitch pine lumbers with and without preservative treatment were used. Bending MOE was measured as the preliminary investigation for grouping the specimen. After the finger, bending MOE of two wood species without preservative treatment shows over 97% property of the control group. The tensile modulus also shows almost same property after the finger joint. And it is found out that the preservative treatment induce little effect on bending and tensile MOE. Based on this result, high performance of examined finger-jointed lumber can be found out. However, tensile strength decreased around 20% which would be induced by the crack along the root of the finger which is formed near the edge during manufacturing stage. And finger-jointed lumber with preservative treatment even shows higher decrement of the tensile strength with higher wooden part failure mode.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.66-73
• /
• 2004

Three species of Italian poplar (Populus euramericana), red pine (Pinus densiflora) and oriental oak (Quercus variabilis) were selected for this study. They were cut so that the distances between each of tips and roots for a pair of fingers were 0, 0.15, 0.30 and 0.45 mm. Poly vinyl acetate (PVAc) and resorcinol-phenol resin (RPR) were used for finger-jointing. Compressive test parallel to the grain was conducted for the finger-jointed specimens. The results were as follows: The efficiency of compressive Young's modulus of finger-jointed timber to solid wood indicated low values, whereas the efficiency of compressive strength indicated high values of more than 90% in all species, especially, it was found that those of red pine indicated markedly high values of more than 97%. The efficiency of compressive displacement of Italian poplar finger-jointed timber was 2 times higher than solid wood, and it was 1.2 and 1.3 times higher than solid woods in red pine and oriental oak, respectively. Also, it was found that 0, the distance between each tip and root for the fingers, indicated the highest efficiency of compressive strength performance in Italian poplar finger-jointed timber, and for red pine and oriental oak finger-jointed timbers, the distances of 0.15 and 0.30 were found to indicate the highest efficiency.