• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.399-402
• /
• 2005

In ultra-high strength SFRCC(Steel Fiber Reinforced Cementious Composites), much silica fume are used to improve strength, flowability and durability. Silica fume have merits of filling the voids, enhancement of reheological chracteristics, production of secondary hydrates by pozzolanic reaction in reactive powder concretes. However silica fume has been imported in high-cost in domestic industry, we need to investigate replaceable material in stead of silica fume in a view of economy Therefore, in this paper, in order to investigate replacement of silica fume in ultra-high strength SFRCC we used the granulate blast-furnce slag with finess 4000, 6000, 8000. As a results, we have evaluated that the bigger the finess the more increase compressive strength of ultra-high strength SFRCC using the blast-furnce slag and there was no problem from the viewpoint of flowability and compressive strength when we use blast-furnce $50\%$ with replacement ratio of silica fume

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.10-11
• /
• 2021

As concrete is used in many construction works, the use of aggregates is increasing. However, supply and demand of high-quality aggregates has become difficult recently, and although circular aggregates that recycle construction waste are used, the performance of concrete, such as liquidity and strength, are being reduced due to defective aggregates. As a result, quality tests such as sieve analysis test are conducted, but a lot of waste occurs such as time and manpower. To solve this problem, this study was conducted to measure the assembly rate of fine aggregate, which accounts for about 35% of the concrete volume, using Deep Learning.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.721-725
• /
• 2001

The main reason for applying pulverizer classifier-rotary type in fossil power plant is boiler high efficiency and energy saving movement in the government. This study intends to analyze the boiler efficiency through the pulverizer classifier-rotary type improvement in thermal power plant and makes its comparison to that of the used fixed type.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.233-240
• /
• 2011

A fineness range of 150 Nm-170 Nm has recently been applied to produce much finer wool products, so that processing techniques for the wool fabrics have been developed very rapidly. However, the worsted wool-like technique using polyester fiber has not been still implemented in general processing technique. Therefore, this research is to develop materials of side-by-side type with high finess, high shrinkage and stretchability. The mechanical properties of the produced fabrics were analyzed and the fundamental information were obtained for the new worsted wool-like products. The physical properties of a latent crimped yarns of side-by-side type with stretch function are analyzed. Also the mechanical properties of five kinds of fabrics are analyzed, which are produced with non-circular shape(+type) warp yarns of a twist of 1000(T/M) and with two kinds of latent weft yarns of a twist of 1000 T/M and DTY respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.303-308
• /
• 2001

Recently, concrete structures have become larger and higher and are demanding high performance concrete with lower heat to prevent thermal cracking, far greater workability, high strength and durability, Application of low heat portland(Type IV) cement for the high performance concrete is the best solution to satisfied those requirements. Here are explained the effect on the properties of high flowing concrete using low heat portland cement by material and mixing variations. Variables for sensitivity test were selected items like finess modulus of aggregates, particle size of limestone powder, unit water, superplasticizer, viscosity agent and concrete temperature. The results of this study were be applied to slurry wall of #215 and #216 of underground LNG tank in Inchon.

• 대한가정학회지
• /
• 제33권1호
• /
• pp.203-210
• /
• 1995

The purpose of this study was to investigate the weights of clothing that middle school girl students are wearing and ghow athe students evaluate their comfort sensations for the state-of-clothing and classroom conditions. The results obtained were as follows. 1. Average total weights of clothing of each month were 795.5g/m2 for May(23.4$^{\circ}C$), 539-590.6g/m2(26.0-31.2$^{\circ}C$) from June to August, 723.6g/m2 for September(25.6$^{\circ}C$) and 980.2g/m2 for October(24.$0^{\circ}C$). 2. Total weight was changed markedly from May to June and from september to October. The change was mainly by tops. Not much change was observed for the bottoms due to the fact that students were blue jeans irrespect of the environmental conditions. 3. Not significant relationship was observed between clothing weights adn comfort sensations. When the classroom temperature was 23.4$^{\circ}C$, more than 50% of the students answered comfortable. 4. Negative correlation was observed between amount of bottoms weight and Rohrer Index; in other words, fat students were less bottoms such as pants of skirts. 5. Negative correlation was observed between physical finess and amount of under shirts at the month of May, June and October; students with igher physical fitness scores wear less under wear when the environmental temperature changes.

• 수산해양기술연구
• /
• 제18권1호
• /
• pp.35-38
• /
• 1982

이상(以上)과 같은 고제(考祭)을 통(通)하여 다음과 같은 결론(結論)을 얻을수 있었다. 1. 각진동차수별(各振動次數別)로 상부구조물(上部構造物)의 길이 변화(變化)에 대한 고유진동수(固有振動數)의 변화(變化)경향을 알수 있다. 2. 같은 구조물(構造物)이던 홀쭉할수록 고유진동수(固有振動數)가 커지고, 커지는 경향은 고차(高次)일수록 터 커진다. 3. 본고(本槁)에서는 두가지 선형(船型)에만 대하여 전달(傳達) matrix 해석법(解析法)으르 검토 고찰 하였으나 그 계산용량(計算容量)이바른 해석법(解析法)보다 훨씬 적음을 감안할때, 본방법(本方法)에 의하여 여러 선형(船型)에 대한 진동자료(振動資料)를 계통적(系統的)으로 계산(計算)하여 두면 방진(防振)자료에 큰 도움이 될것으로 기대된다.

• 한국식품조리과학회지
• /
• 제8권2호
• /
• pp.83-93
• /
• 1992

This dissertation was aimed to study the stability of egg foams and the quality of rice yackwa added with egg foams. Because of the difference of protein composion between rice flour and wheat flour, yackwa made from rice powder turned out to be harder and less raised. Egg foams were added to the rice flour to help raise the dough to a great extent and make it softer when frying. The smaples were prepared differently: in the finess of rice flour (100, 140 mesh), the kinds of egg foams (whole egg, egg white), and the content of egg foams (40 g, 60 g), respectively. The stability of egg foams was determined by an Optical microscope, the hardness of rice yackwa was examined by Instron, the structure by Scanning Electron Microscope, the color by Hunter's Colorimeter, and the sensory evaluation was also made. The resluts are as knows: The most stable egg white foam and whole egg foam were the 2 and 3 min. whipped ones, respectively. In the case of rice yackwa, which was made from 140 mesh rice flour and 60 g of whole egg, the hardness and the structure were similar to those of wheat yackm. It was very tasty and most preferred. As a whole, the color of rice yackwa was lighter man mat of wheat yackwa.

• 한국토양비료학회지
• /
• 제27권4호
• /
• pp.247-254
• /
• 1994

인광석분말(燐鑛石粉末)의 화학(化學) 및 광물학적(鑛物學的) 특성(特性)을 구명하고 인광석분말(燐鑛石粉末)의 구용성(枸溶性) 인산함량(燐酸含量)을 증대시키기 위한 시험을 수행하여 인광석분말(燐鑛石粉末)의 직접시용(直接施用)을 위한 기초자료(基礎資料)를 얻기 위해 실시한 결과를 요약(要約)하면 다음과 같다. 1. 인광석(燐鑛石)의 주광물(主鑛物)은 인회석(燐灰石)(Apatite, $Ca_5(PO_4)_3$ OH, F, Cl) 중(中) Carbonate apatite이었으며 부광물(副鑛物)로는 방해석(方解石)과 석영(石英) 등(等)이 함유되어 있었고 시차열분석(示差熱分析)(DTA)결과를 보면 $1,000^{\circ}C$까지 뚜렷한 흡열(吸熱)이나 발열(發熱)peak를 볼 수 없었다. 2. 인광석분말(燐鑛石粉末)은 입도(粒度)가 가늘어질수록 구용성(枸溶性) 인산함량은 증가(增加)하나 수용성(水溶性) 인산함량은 입도(粒度)에 관계없이 증가(增加)하지 않았고, 소성(燒成)할 경우 소성시간(燒成時間)이 길어질수록 구용율(枸溶率)은 감소하였으며, 항온온도(恒溫溫度)가 높거나 항온시간(恒溫時間)이 길어질수록 구용율(枸溶率)이 증가하였다. 3. 인광석분말(燐鑛石粉末)을 퇴구비(堆廐肥)와 발효(醱酵)시키거나 산처리(酸處理)를 하면 인산구용율(燐酸枸溶率)이 증가하며 산농도(酸濃度)가 동일할 경우에는 황산(黃酸)이 질산(窒酸) 보다 우수하였다. 30% 황산처리(黃酸處理)는 기간이 진전될수록 구용성(枸溶性) 및 수용성(水溶性) 인산함량(燐酸含量)이 증가하였으나 당밀폐액(糖蜜廢液)처리는 크게 증가하지 않았고, 30% 황산처리(黃酸處理) 후 당밀폐액(糖蜜廢液)으로 제립(製粒)한 시험제품이 당밀폐액(糖蜜廢液)만 처리한 시험제품 보다 구용성(枸溶性) 및 수용성(水溶性) 인산함량(燐酸含量)이 높았다.