• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.73-78
• /
• 2020

There appears lateral capillary force in a hydrophilic flat needle employed for the fabrication of fine organic thin-film stripes, bringing in an increase of the stripe width. It also causes the stripe thickness to increase with increasing coating speed, which is hardly observed in a normal coating process. Through computational fluid dynamics (CFD) simulations, we demonstrate that the lateral capillary flow can be substantially suppressed by increasing the contact angle of the needle end. Based on the simulation results, we have coated the outer surface of the flat needle with a hydrophobic material (polytetrafluoroethylene (PTFE) with the water contact angle of 104°). Using such a hydrophobic needle, we can suppress the lateral capillary flow of an aqueous poly(3,4-ethylenedioxythiophene): poly(4-styrenesulfonate) (PEDOT:PSS) to a great extent, rendering the stripe narrow (63 ㎛ at 30 mm/s). Consequently, the stripe thickness is decreased as the coating speed increases. To demonstrate its applicability to solution-processable organic light-emitting diodes (OLEDs), we have also fabricated OLED with the fine PEDOT: PSS stripe and observed the strong light-emitting stripe with the width of about 68 ㎛.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.69-74
• /
• 2019

The aim of this work is to investigate the effect of the microtip length in a slot-die head on coating of a fine poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) stripe. To this end, we have employed a meniscus guide with a 150-㎛-wide microtip and performed roll-to-roll slot-die coatings by varying its length between 500 ㎛ and 50 ㎛. When the microtip length is 150 ㎛ or shorter, we have observed three unexpected phenomena; 1) though the solution spreads much wider than the microtip width, yet the coated stripe width is almost the same as the microtip width, 2) the stripe width decreases, but the stripe thickness is rather increased with increasing coating speed at a fixed flow rate, 3) we obtain stripes much narrower than the microtip width at high coating speeds. It is due to the fact that 1) the meniscus is not well controlled by a short microtip, 2) the main stream of solution from the outlet is very close to the substrate and thus the distributed solution along the head lip merges with the main stream, and 3) the solution is not spread over the entire microtip end at high coating speeds, causing a tiny wobble in the meniscus. Using the 150-㎛-wide and 250-㎛-long microtip, we have fabricated 153-㎛-wide and 94-nm-thick PEDOT:PSS stripe at the maximum coating speed of 13 mm/s. To demonstrate its applicability in solution-processable organic light-emitting diodes (OLEDs), we have also fabricated an OLED device with the fine PEDOT:PSS stripe and obtained strong light emission from it.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.100-104
• /
• 2019

We have investigated the feasibility of fabricating fine stripes using needle coating for potential applications in solution-processed organic light-emitting diodes (OLEDs). To this end, we have employed an aqueous poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) solution that has been widely used as a hole injection layer (HIL) of OLEDs and performed needle coatings by varying the process parameters such as the coating gap and coating speed. As expected, the stripe width is reduced with increasing coating speed. However, the central thickness of the stripe is rather increased as the coating speed increases, which is different from other coating processes such as slot-die and blade coatings. It is due to the fact that the meniscus formed between the needle tip and the substrate varies depending sensitively on the coating speed. It is also found that the stripe width and thickness are reduced with increasing coating gap. To demonstrate its applicability to OLEDs, we have fabricated a red OLED stripe and obtained light emission with the width of about 90㎛.

• The Research Journal of the Costume Culture
• /
• v.7 no.5
• /
• pp.80-92
• /
• 1999

The objectives of this study were to investigate the relation between personality(activity, emotional stability, and dominance) and clothing design preferences, and to examine the differences of clothing design preferences according to demographic variables of men. Subjects for the study were 255 male white-collar workers ranging in ages from twenties to fifties, in Seoul and Kwangju City, Korea. The men with higher activity of personality preferred the double jacket with 4 buttons, the combination of light color jacket and dark trousers, glen check pattern jacket, herringbone pattern jacket, light beige color dress shirts. The higher the emotional stability, the higher the preferences on diverse patterns such as fine stripe, plaid, hound\`s-tooth check, and small check pattern. The men with higher dominance preferred dark blue color suit, glen check pattern suit, and necktie of red circle, and disliked the necktie of gray circle. The men in their 20\`s and 30\`s liked the single jacket with 3 buttons, the suit of fine stripe and the necktie of gray circle more among three income groups. The higher the men\`s age and income were, the more they liked the conservative style such as a single jacket with 2 buttons. The men who reside in Seoul liked the suit of gray circle, the jacket and trousers of same color, the patternless jacket, and the patternless suit more than the men in Kwangju. Therefore, the men in methropolitan area preferred conservative clothing image. Fine stripe pattern and patternless materials were preferred when men wore jacket and trousers of same color, while glen check pattern was preferred as the pattern of jacket when jacket and trousers of different color. Male white-collar worker liked single jacket more than double jacket, and preferred the dark blue color suit and necktie, patternless suit, fine stripe suit, and the pale blue dress shirts generally. The present findings provide that the personality of male has influence on the clothing design preferences, and it is possible to infer men\`s personality by their attire.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.752-761
• /
• 2016

Hyperspectral images are often contaminated with stripe noise, which severely degrades the imaging quality and the precision of the subsequent processing. In this paper, a variational model is proposed by employing spectral-spatial adaptive unidirectional variation and a sparse representation. Unlike traditional methods, we exploit the spectral correction and remove stripes in different bands and different regions adaptively, instead of selecting parameters band by band. The regularization strength adapts to the spectrally varying stripe intensities and the spatially varying texture information. Spectral correlation is exploited via dictionary learning in the sparse representation framework to prevent spectral distortion. Moreover, the minimization problem, which contains two unsmooth and inseparable $l_1$-norm terms, is optimized by the split Bregman approach. Experimental results, on datasets from several imaging systems, demonstrate that the proposed method can remove stripe noise effectively and adaptively, as well as preserve original detail information.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.63-63
• /
• 2020

Rice stripe virus (RSV) disease is one of the major constraints in rice production, transmitted by the small brown planthopper (SBPH; Laodelphax striatellus). Upon RSV infection, plants develop typical symptoms, which include chlorosis and weakness of newly emerged leaves, white and yellow spots, stripe on leaves, and necrotic and wilting leaves, resulting in plant growth inhibition, oxidative damage that may culminate in programmed cell death (PCD) and plant death in severe epidemics. Although RSV-resistant quantitative trait loci (QTLs), Stv-a, Stv-b, and Stv-bi, were mapped using various resistant varieties, one RSV-resistant gene, OsSOT1, has been identified so far. In this study, we used the rice cultivar Zenith, known to carry Stv-b, to investigate novel RSV-genes through fine mapping. Therefore, we crossed Zenith (Donor parent, RSV resistant) with Ilpum (Recurrent parent, RSV susceptible) to fine-map using a BC₂F₂ population of 2100 plants. Chromosome segment introgression lines that were heterozygous at a different region were selected, two types of heterozygous lines showed an heterozygous genotype between Sid2 and Sid75 to Indel9 and RM6680. Interestingly, we identified qSTV11^Z region harboring Stv-b, covering about 171-kb region between the InDel markers Sid75 and Indel8. The localization of qSTV11^Z provides useful information that could be used for marker-assisted selection and determination of genetic resources in rice breeding.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.79-84
• /
• 2020

Unlike a printing process, it is difficult to pattern organic thin films in the longitudinal (coating) direction using a coating process. In this paper, we have investigated the feasibility of patterning organic thin films using needles. To this end, we have slot-coated an aqueous poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) solution in the form of a fine stripe or large area and then applied the dual needle; one for discharging the main solvent of the underlying thin film and the other for sucking the dissolved thin film. We have found that the pattern width and depth increase as the moving speed of the plate decreases. However, it is observed that the sidewall slope is very gentle (the length of the slope is of the order of 200 ㎛) due to the fact that the discharged main solvent is widely spread and then isotropic etching occurs. With this scheme, we have also demonstrated that a fine stripe can be obtained by scanning the dual needle closely. To demonstrate its applicability to solution-processable organic light-emitting diodes (OLEDs), we have also fabricated OLED with the patterned PEDOT:PSS stripe and observed the insulation property in the strong light-emitting stripe.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.584-588
• /
• 2013

Studies are using a roll forming bar. A bar coating device available for a variety of coating conditions was developed. It is characterized by the bar forward and reverse rotation, fine-tune coating speed, and stripe coating. To determine the characteristics of the equipment, the coating tests under different coating conditions were carried out. As a result of the coating tests, the equipment was confirmed as one of strong candidates for the production tool of organic solar cells. The further production test of organic solar cells through stripe coating is in progress.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.477-479
• /
• 2006

In this study, a stripe type counter electrode discharge cell for PDP was attempted to realize high luminance efficiency and low firing voltage for fine pitch discharge cells. The cells were prepared using electroplated Cu/Ni electrodes coated with glass dielectric layer. The discharge behaviors of such cells were observed. These results indicate that the counter electrode discharge cells have different discharge behavior compared with coplanar cells, which may affect the luminance efficiency of the panel.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.258-258
• /
• 2022