• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 추계 학술논문발표회 논문집
• /
• pp.179-182
• /
• 1998

It is widely recognized that conventional means for determining the minimum ignition energy(MIE) of powder are time-consuming and require operational skill. As a variety of new fine powders are being produced day by day in industry, there is an urgent need to a quicker and more economical means to measure MIE. To meet this requirement, we have developed a measurement system which employs a novel method to create an air/dust mixture in a miniature combustion box. In this system, the powder to be tested input into a hopper made of metal mesh, and successively fed downward to form a thin, curtain-like dust/air mixture by vibration. With this new apparatus, three type of powders -Lycopodium, Anthraquinone, and Polyacrylonitrile-were tested and the MIE data were compared with those taken with a conventional apparatus(the Hartmann tube). Two of them agreed satisfactory, but the other, anthraquinone, showed quite different values supposedly due to the agglomeration of the powder particles by static-charge.

• Structural Engineering and Mechanics
• /
• 제4권6호
• /
• pp.613-630
• /
• 1996

The homogenization method is used to develop a beam element in space for thermo-mechanical analysis of unidirectional composites. Local stress and temperature field in the microscale are described using the function of homogenization. The global (macroscopic) behaviour of the structure is supposed to be that of a beam. Beam-type kinematical hypotheses (including independent shear rotations) are hence applied and superposed on the microdescription. A macroscopic stiffness matrix for such a beam element is then developed which contains the microscale properties of the single cell of periodicity. The presented model enables us to analyse without too much computational effort complicated composite structures such as e.g. toroidal coils of a fusion reactor. We need only a FE mesh sufficiently fine for a correct description of the local geometry of a single cell and a few of the newly developed elements for the description of the global behaviour. An unsmearing procedure gives the stress and temperature field in the different materials of a single cell.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.157-165
• /
• 1992

본 연구에서는 굽힘을 받는 평판의 특성을 다루었으며 평판중 특히 수밀 격벽판 및 디프탱크 격벽판에 대하여 각 선급의 강선 규칙에서 규정하고 있는 규정식의 이론적 배경에 대하여 해석하고, 각 선급의 강선규칙에서 규정하고 있는 격벽판에 대한 설계 규정식을 비교검토한 후 모델 선박을 선정하여 격벽판에 대한 3차원 상세구조해석을 실시하여 선급규정식의 적용범위를 밝힘으로서 새로운 규정식의 방향을 제시하였다.

• 한국해안해양공학회지
• /
• 제6권2호
• /
• pp.196-204
• /
• 1994

도서가 산재해 있고 수심의 변화가 불규칙한 해역을 공간적으로 이산화하기 위하여 전처리 과정에서 가변 격자를 자동으로 발생하여 새만금 해역에 적용함으로써 방조제 축조의 영향을 해석하였다. 비선형의 주기적 유한요소모형(TEANL)이 해석의 도구로 이용되었는데 실측유속과 비교적 잘 일치되는 양호한 결과를 얻을 수 있었다. 모형 적용결과 건설중민 새만금 방조제의 신시도와 가력도 그리고 대항리, 변산반도를 잇는 방조제 전면 해역은 폭이 넓은 일종의 구형 폐쇄만으로 변화되어 이 일대 해역의 순환 및 확산 환경에 심각한 영향을 미칠 수 있을 것으로 예측되었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.565-569
• /
• 2004

This paper deals with the characteristics of potential rise and effective impulse impedance of deep-driven ground rods that are used in high resistivity soil or in confined places such as downtown. Also the effects of the impulse and fault currents on the deep-driven ground rods combined with different type grounding electrodes like as mesh grids and counterpoises are described. The $8/20{\mu}s$ impulse current and other wave currents with different rise times are injected into the test ground rod and the effective impedances are examined. The most effective way to obtain the fine transient impedance behaviors of deep-driven ground rods is to reduce the inductive component of grounding electrode systems combined with other ground electrodes.

• 소성∙가공
• /
• 제11권6호
• /
• pp.503-512
• /
• 2002

The drawbead is used to control material flow into the die during the binder wrap process and the stamping process in the sheet metal forming process. Since the dimension of drawbead is relatively small in comparison with the typical dimensions, it is difficult to include drawbeads in finite element analysis of the sheet metal forming process. It is because the mesh system has to be fine enough to describe the drawbead and the computation time is drastically increased. In this paper, simulation of drawbead forming has been carried out to obtain the equivalent boundary conditions in the binder wrap process and the stamping process. In order to investigate the effect of various die geometries, parameter studies are performed with the variation of parameters such as the blank length, the drawbead depth, the drawbead radius, the inclination of die and the friction coefficient.

• Ocean and Polar Research
• /
• 제42권4호
• /
• pp.283-292
• /
• 2020

Oncaea prendeli Shmeleva, 1966 is redescribed here based on a specimen collected using a fine-mesh net in the epipelagic layer in the south sea of Jeju Island, Korea. The Korean specimen is generally similar to Mediterranean specimens in terms of morphological characteristics, but it shows a few minor differences in a slightly larger length-to-width ratio for the distal endopod segment of the antenna, a relatively shorter caudal seta IV, and additional ornamentation on the maxillule and maxilla. This species is distinguishable from the most similar congeneric species, O. tregoubovi Shmeleva, 1968, and three species of the genus Spinoncaea Böttger-Schnack, 2003 by the distal and lateral armature of the antenna, ornamentation on the female maxilliped, spine number on the endopod of leg 2, and proportional length of setae on the caudal ramus. Moreover, spine lengths on the exopods of legs 2-4 are proposed as new morphological characters for the identification of congeners. This is the first record of O. prendeli in Korean waters.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.62-69
• /
• 2022

In the present study, the injection molding optimization of a large thick LH type elastic frames for the reduction of warpage was performed. Two kinds of fine and coarse finite element models were prepared to investigate the efficiency of analysis time and quality on simulation results. In order to derive injection molding conditions that can minimize distortion of parts, it was investigated that the effects of mold temperature, resin temperature, injection time, hold pressure switching time, holding pressure and the hold time on deformation characteristics using the design of experiments. The main influential factors on the warpage were found from the optimization simulation and the geometry data of the warpage result was converted into an initial model for injection simulation. It was shown that a coarse model with good mesh quality could be adapted for mold design since the total analysis time using the proposed model was reduced to 1/10. The suggested inversed warpage model produced the best minimized result of warpage.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권3호
• /
• pp.41-44
• /
• 2006

This study introduced waste water treatment method by superconducting HGMS(High Gradient Magnetic Separation). HGMS treatment method is high efficient method for various waste water, we have surveyed superconducting magnetic separation technology. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel mesh, which is a core component in the magnetic separation system. In our basic preliminary experiment using HGMS, it was made clear that the fine para-magnetic particles in the wasted water obtained from steelmaking process of POSCO can be separated with high efficiency.

• 환경생물
• /
• 제40권4호
• /
• pp.631-640
• /
• 2022

Labidocera pavo Giesbrecht, 1889 and L. sinilobata Shen and Lee, 1963, belonging to the detruncata group in the genus Labidocera were collected from the southwestern coastal waters of Korea, using a Norpac net (0.2 mm mesh size). Labidocera sinilobata, known to be endemic species in estuary of Chinese rivers, is the first record in Korean waters. In Chinese waters, this species has only been briefly documented and illustrated. In the study, their morphological characteristics were fully redescribed with careful examination of the fine epidermal structure using a SEM (Scanning Electron Microscope) in addition to their illustrations and compared with species of the detruncata species-group.