• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.2
• /
• pp.195-203
• /
• 2018

Among the techniques of reducing the drag to increase the speed of underwater moving bodies, we studied on the drag reduction method by gas injection. Researches on gas injection method have been paid much attention to reduce the drag of vessels or pipe inner walls. In this study, we used a sintered metal mesh that can uniformly distribute fine bubbles by gas injection method, and applied it to a cylindrical underwater moving body. Using the KRISO medium-sized cavitation tunnel, we measured both the bubble size on the surface of the sintered mesh and the bubble distribution in the boundary layer. Then, drag reduction tests were performed on the cylinder type underwater moving models with cylindrical or round type tail shape. Experiments were carried out based on the presence or absence of tail jet injection. In the experiments, we changed the gas injection amount using the sintered mesh gas injector, and changed flow rate accordingly. As a result of the test, we observed increased bubbles around the body and confirmed the drag reduction as air injection flow rate increased.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.509-517
• /
• 2013

The purpose of this study is to assess the applicability of device-type stream coagulation process which combines physiochemical, biological processing for efficient improvement of water quality in small, middle-sized urban streams. The stream purification facility of this study is compose of pressure flotation type Micro Bubble Process(MBP) to remove TSS and TP and conduit line type Attached Microbial Pipe System(AMPS) to remove BOD. Test conditions of each device were set by floating stay time and change of ultra fine bubble injection amount of MBP, and change of AMPS stay time. Also, removal efficiency of pollution sources of each process were assess by change of season. As result of continuous operation of each process, MBP showed a maximum of TSS 83.69%, TP 95.15% process efficiency and AMPS showed a maximum of 52.95% TBOD5 removal efficiency. Also as result of circular operation of each process, MBP showed a maximum of TSS 69.75%, TP 70.17% process efficiency and AMPS showed a maximum of 68.58% TBOD5 removal efficiency. Therefore, it is considered that this stream coagulation process is effective in improving the water quality of streams in urban areas.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.1041-1051
• /
• 2020

The technology of microbubbles and nanobubbles originated in Japan and Europe is applicable to various applications and its effects are diverse, attracting attention not only from many researchers but also from industry experts. In particular, nanobubbles have the advantage that they can be applied to products in the form of liquids, such as cosmetics, from the study that they can exist for more than several months in water. In this study, it was carried out the production of nanobubbles using bubble encapsulation technique and the experiment of skin permeability enhancement of active substances in cosmetics using nanobubble techniquethree. Nanobubbles were confirmed to affect the skin permeability increase of active substances, and up to 250% increase in skin permeability compared to non-bubbles-free materials(Caffeic acid, at 8 hour). It is expected that research results and industrial ripple effects can be expected not only in the cosmetic field, but also in fields applicable to the improvement of permeability by nanobubble techniques, such as areas related to drug delivery system.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.421-428
• /
• 2005

Dissolved air flotation (OAF) is a solid-liquid separation system that uses fine bubbles rising from bottom to remove particles in water. In this study, we investigated the effect of L/W (L; Length, W; Width) on the hydro-dynamic behavior in DAF system using CFD (Computational Fluid Dynamics) and ADV (Acoustic Doppler Velocimetry) technique. The factual full-scale DAF system, L/W ratio of 1:1, was selected and various L/W ratio (2:1, 3:1, 4:1 and 5:1) conditions were simulated with CFD. For modelling, 2-phase (gas-liquid) flow equations for the conservation of mass, momentum and turbulence quantities were solved using an Eulerian-Eulerian approach based on the assumption that very small particle is applied in the DAF system. Also, for verification of CFD simulation results, we measured the factual velocity at some points in the full-scale DAF system with ADV technique. Both the simulation and the measurement results were in good accordance with each other. As the results of this study, we concluded that L/W ratio and outlet geometry play important role for flow pattern and fine bubble distribution in the flotation zone. In the ratio of 1:1, the dead zone is less than those in other cases. On the other hands, in the ration of 3:1, the fine bubbles were more evenly distributed.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.62-69
• /
• 1999

In this study, the synthesis of PZT powder by bubble column reactor was investigated at various reaction conditions. As a result, the volume % of $NH_3$ gas used as a precipitator had no effect on the synthesis, but the more research is needed to control particle size.As a carrier gas, Ar, $O_2$ and air only increased the stirring effect but had no effect chemically on the synthesis. The calcination temperature of prepared PZT powder was about $500-600^{\circ}C$ and the meanparticle size of synthesized PZT powder was about $0.17{\mu}m$. The grain size of sintered body is about $0.5~3{\mu}m$ and this is similar with the value of commercial products.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.9
• /
• pp.798-802
• /
• 2005

The plating shape in the opening of photoresist becomes gradated shape in the fountain plating system, because bubbles from the wafer surface are difficult to escape from the deep openings, vias. In this paper, the bubble flow from the wafer surface during plating process was studied and we designed the tilted electrode ring to get uniform bump height on all over the wafer and evaluated the film uniformity by SEM and $\alpha-step$. In a-step measurement, film uniformities in the fountain plating system and the tilted electrode ring contact system were $\pm16.6\%,\;\pm4\%$ respectively.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.1
• /
• pp.161-169
• /
• 1994

Hemangioma is a common tumor characterized by the proliferation of blood vessels. Some authorities believe that this lesion is not a true neoplasm, but rather a developmental anomaly or harmatoma. This lesion may be present at any age, but most cases are present at birth or arise at an early age, and the central hemangioma of the jaw is uncommon. The usual radiographic appearance of a hemangioma may have one or more of the following characteristics: a soap-bubble or honey-comb effect with multiloculated cyst like lesions having a fine fibrillar framework visible within them. The roots of teeth mayor may not show resorption. The authors have experienced a case of hemangioma, that occured in anterior mouth floor and Mn.symphysis area cured by means of surgical excision without dysfunction and facial disfigurement.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.57 no.4
• /
• pp.16-24
• /
• 2015

Desalination technology is a process to remove salt from water. There are three classified In accordance with the concentration of salt The concentration of sea water 15,000~50,000mg/l, brackish water 1,500~15,000mg/l, desalination less than 500mg/l.. In general, salt to remove for using a pre-treatment UF filter, but this study is new pre-treatment technology RO Membrane process technology Suspended particulate matter is said most were treated at the pre-treatment equipment, wheat affluent particulate material was removed from the MF filter. Influent SS 16.2mg /l The treatment was effective in treatment 0.05mg /l of 99% is removed. COD is reduced to 60% in the pre-treatment device, after treatment was reduced to 30% RO membrane. Influent COD 10.2mg/l treatment was removed 1.9mg/l. The removal rate is 81.9%. Desalination removes the ionic substances in the RO Membrane. Influent EC $978.8{\mu}s/cm$ and treatment showed a result of $18.7{\mu}s/cm$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.199-199
• /
• 2019

친환경적인 산업기술인 초미세기포(Ultra Fine Bubble, 이하 UFB) 제조 기술은 농업, 수처리, 그리고 환경재생 등 다양한 분야에서 적용되고 있다. UFB는 1,000nm 이하의 크기를 가진 기포로서 용존산소를 통한 농작물 성장 촉진 및 수중의 대장균 및 세균제거 등 다양한 성질을 지니고 있다. 본 연구는 기존의 방식과는 다르게 자왜현상을 메카니즘으로 갖는 타격식으로 제조된 UFB 생성장치를 통해 생성된 200nm이하의 크기를 가진 UFB를 실제 딸기 농장에 적용하여 딸기의 성장을 모니터링하고 살균 성능을 가진 화학제품과 UFB를 대장균에 적용하여 대장균 제거효율을 비교하였다. 딸기농장에 기존에 사용되던 지하수 대신 UFB를 주입하여 딸기성장 초기단계의 DO농도를 측정하고 딸기 생식단계에 산소포화도에 대한 질산염의 농도를 측정하여 상관관계를 분석하였으며 각각의 딸기 열매를 수확하여 무게를 비교하였다. 또한 대장균이 함유되어있는 대변을 채취하여 살균 성능을 가진 화학제품과 UFB수를 각각 대장균이 포함된 실험원수와 반응시켜 배양하고 검출된 대장균 개체 수에 확인하여 제거효율을 비교분석 하였다. 딸기성장 초기단계의 DO농도 측정결과 DO농도가 6~9ml/L로 높게 유지되고 있음을 확인하였고 딸기 생식단계에서 산소포화도가 일정하게 유지되고 있음에 따라 질산염의 농도가 점차 감소하는 것을 확인하였다. 또한 수확한 열매의 무게는 각각 37g, 19g으로 UFB수를 통해 재배된 딸기가 약 2배 이상 높은 것으로 나타났다. 이와 같은 결과는 수중의 용존산소가 딸기 성장 초기에 뿌리의 발육에 긍정적인 영향을 미치고 질산염을 원활하게 섭취하게 하여 딸기의 성장이 촉진되었고 열매의 무게가 증가하였다고 판단된다. 또한 대장균이 함유된 원수, 원수+화학제품, 원수+UFB를 접종하여 대장균과 반응시켜 배양하여 대장균 개체 수를 확인한 결과, 원수의 경우 약 600개의 대장균의 개체수가 나타났고, 원수+화학제품의 경우 검출된 대장균의 개체 수는 약 300개 정도로 나타났다. 이를 희석한 비율을 계산하여 대장균 개체 수를 나타내면 원수 약 6000개/ml, 원수+화학제품 약 6000개/ml로 비슷하게 나타난다. 반면, 원수+UFB 경우 검출된 대장균의 개체 수는 1개로 희석한 비율을 계산하여 대장균 개체 수를 나타내면 약 20개/ml로 나타난다. 이와 같은 결과를 통해 UFB는 99.9%의 대장균 제거효율을 보였으며, 화학제품은 대장균 제거효율을 보이지 않았다. 따라서 화학제품은 항균기능은 작용하지만 살균기능은 거의 없다고 판단하였고, UFB의 경우 기포가 소멸하면서 발생되는 초고온, 초고압을 형성하여 주변에 존재하는 대장균을 제거하였거나, 기포가 소멸할 때 발생되는 OH 라디칼을 통해 대장균의 세포를 화학적으로 분해시켜 대장균을 제거하였다고 보인다.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.195-202
• /
• 2009

As a basic research of developing two-interconnected fluidized beds system for selective solid circulation, a solid separator was developed to separate fine and coarse particles by means of particle size difference with particle size separation system equipped with metal screen. The effects of gas velocity, height of solid separator, and separation area on the solid separation rate were investigated as well. The solid separation rate increased as the gas velocity, height of solid separator, and separation area increased. As the gas velocity and height of the solid separator increased, the variation of the solid separation rate was consistent with that of bubble size. Consequently, coarse($212{\sim}300{\mu}m$) and fine($63{\sim}106{\mu}m$) particles were separated using the solid separator and the solid separation rate was ranged from 4.4 to 127 g/min. We also proposed two interconnenced fluidized beds system for sorption enhanced water-gas shift process equipped with the developed solid separator.