• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.111-114
• /
• 2006

Recently, it is increased on the concern for the reuse of waste concrete because of the shortage of natural aggregate and the increase of waste concrete. And recycled coarse aggregate is used variously, but the existing wet method producted recycled fine aggregate has problem like the high price facilities, the long time progress of the work and the poor of recycled fine aggregate. The aim of this study is to investigate outline and performance evaluation of the drying specific gravity separation method to product high duality recycled fine aggregate. Finally, this study is shown investigate process flowing of drying separation type with gravity manufacture, producte system and function of detail devices. The performance of the method of drying specific gravity separation is certificated as the qualities of recycled fine aggregate satisfied the KS

• 콘크리트학회논문집
• /
• 제20권5호
• /
• pp.557-563
• /
• 2008

순환잔골재를 생산하는데 있어서 기존의 습식공정에서 사용되는 파 분쇄 방법만으로는 골재에 포함되어 있는 시멘트페이스트 성분을 효율적으로 떨어내지 못하며, 씻기 작업에 사용되어지는 세척수는 씻기 작업 후 별다른 처리 없이 순환하여 사용되어 지고 있기 때문에 칼슘 성분을 다량 함유한 pH $12{\sim}13$의 고알칼리성수로 변화된다. 따라서 골재 내 폐모르타르분을 효과적으로 제거하지 못할 뿐더러 용수 또한 지정폐기물로 분류되어 방류 시 별도의 처리를 해야만 하는 추가적인 비용이 발생하게 된다. 이에 본 연구에서는 기존 순환골재 생산 방식 중 문제시 되어온 파 분쇄 방법의 문제점을 보완하고 강알칼리수를 중화시켜 순환골재의 품질기준에 만족하는 순환잔골재의 최적 생산조건에 대하여 실험적 및 통계적으로 검토 분석하고자 하였다. 즉, 순환잔골재의 물리적 특성에 영향을 미치는 세척수양, 피분쇄물인 굵은골재량, 마쇄시간을 실험인자로 선정한 후 실험계획법에 의하여 순환 잔골재와 물비, 순환 잔골재와 굵은 골재비 및 마쇄시간에 대하여 그 유효성을 검토하였으며, 품질규격에 적합한 순환잔골재를 생산하기 위한 최적의 마쇄조건을 도출하고자 하였다. 순환골재의 품질기준에 만족하는 순환잔골재의 제조 방법에 관한 연구결과, 물비, 굵은골재비, 마쇄시간 변화에 따른 순환잔골재 품질 변화는 마쇄시간이 밀도 변화에 있어 마쇄조건 중 가장 유효하며 물비는 크게 영향을 주지 않는 것으로 나타났다. 또한 마쇄시간 15분, 굵은골재비 1.0 이상이 목표품질 절건밀도 $2.5\;g/cm^3$ 이상 흡수율 3% 이하의 골재를 생산하는데 최적조건인 것을 알 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.51-58
• /
• 2018

본 연구는 콘크리트 산업에 있어 자원 고갈, 환경 문제 등을 대처할 수 있는 순환골재의 활용을 촉진하며 순환골재콘크리트의 레미콘 실생산을 위한 기초적 연구로서, 순환골재 사용량에 따른 슬럼프 고정 순환골재콘크리트의 물시멘트비 변화 및 물리적 특성을 실험하고 그 결과를 회귀분석하여 순환골재콘크리트의 압축강도 추정을 위한 단위시멘트량, 순환골재의 사용량, 물시멘트비 등 레미콘 생산 조건을 검토하여 다음과 같은 결론을 얻었다. 순환골재를 사용한 콘크리트는 목표 슬럼프를 유지하기 위해서는 단위수량 증가가 요구되며, 순환굵은골재보다 순환잔골재의 치환에 더 많은 단위수량의 증가가 필요하였다. 순환잔골재의 치환율은 60%이하는 레미콘 품질기준에 벗어나지 않는 공기량 확보가 가능하였다. 순환골재를 사용한 콘크리트의 압축강도는 순환골재의 치환율이 증가할수록 감소하는 것으로 나타났으며, 특히 순환잔골재를 100% 치환한 경우 압축강도는 25%정도 저하하였다. 순환골재를 사용한 콘크리트의 배합인자에 따른 압축강도의 상관관계를 분석한 결과, 순환잔골재>물시멘트비>공기량 순으로 영향을 미치는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.197-198
• /
• 2023

This study was conducted as part of research and development of high-strength grout. Accordingly, dolomite aggregate was used as a filler incorporated into the high-strength grout. Dolomite aggregate has a disadvantage of increasing the viscosity of the grout due to higher generation of fine powder than other aggregates. Accordingly, in this experiment, it was confirmed that the viscosity, flow time, and flow of high-strength grout change according to the volume composition ratio of dolomite aggregate and cement-based material. All experiments were conducted based on the Korean Industrial Standard KS F 4044, and the mixing factor was applied according to the composition ratio of the binder and the filler. In the experiment, the amount of fine powder contained in the dolomite aggregate rather than the silica sand used in the past is grasped, and after mixing with the grout accordingly, the mixture is proceeded to measure the viscosity in an unhardened state. In addition, the flow and flow time of the grout are evaluated according to the viscosity. As a result of the experiment, it was confirmed that the viscosity and flow time decreased and the flow increased as the volume composition ratio of the dolomite aggregate to the cement-based material increased.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.225-227
• /
• 2011

This study investigates the effect of crushed fine aggregate and chemical admixture (durability improvement agent, named DIA) on blast furnace slag-based brick. The control brick was made with recycled fine aggregate of 100% and, no cement was used. Test results showed that all specimens developed similar strength, except for the specimen without partial replacement of crushed fine aggregate at 3 days. However, it is interesting to note that this specimen without crushed fine aggregate resulted in the highest strength at 7 days. In addition, the DIA had a major effect on the absorption ratio of brick specimens. For the brick specimens with partial replacement of crushed fine aggregate with 10%, the addition of DIA with only 1% was enough to satisfy the code regulated by KS F 4004.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.388-391
• /
• 2004

This research investigates how the fineness modulus of fine aggregates and the grain shape of coarse aggregates affects flow characteristics, packing characteristics and compressive strength characteristic. The experimental results, show that increase of the fine aggregate's fineness modulus improved concrete flow, but filling ability was high at over KS regulation extent due to segregation phenomena. It is considered that the improvement of 0.1 spherical rate was effective to concrete fluidity elevation by reducing about $6\%$ of fine aggregate ratio displays which the smallest gap rate of aggregate. Compressive strength was increased to about 0.6MPa everytime F.M. 0.1 of fine aggregate fineness is increased. However, it was decreased to about 9MPa at F.M. 3.5 compared to F.M. 3.0.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.61-62
• /
• 2015

This study has analyzed the engineering characteristics of resource-cycling mortar according to the variation of fine aggregate type using illite with high development potentials by setting the goal as developing eco-friendly construction materials. As a result, while flow has increased if recycled fine aggregate and waste refractory are used separately or mixing them adequately in case of flow and compressive strength, the flow had somewhat declined followed by illite replacement. However, the possibility of such usage is determined to be adequate if used by mixing illite, recycled fine aggregate and waste refractory properly due to the dry shrinkage effect.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.147-148
• /
• 2019

Lack of fine aggregate is adversely affecting the quality of concrete. Due to lack of land sand, EZZ sea sand has been used. However, the use of sea sand is also difficult because of the opposition of fishermen. The purpose of this study was to analysis the effect of slag fine aggregate to durability and compressive strength of concrete. The concrete compressive strength and durability were assessed to derive a proper mix ratio of fine aggregate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.259-260
• /
• 2022

In this study, as part of a study to solve the problem of aggregate supply and demand, blast furnace slag fine aggregate and ferronickel slag fine aggregate were used as substitutes for natural fine aggregate, and a bioinspired polymer, a catechol-functionalized chitosan, was used instead of the mixing water.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.417-422
• /
• 2001

The purpose of this study is to investigate experimentally the workability, compressive and flexural strength properties of rapid-set concrete with various mixture. The kinds of fine aggregate(river sand, sea sand, crushed sand), water-cement ratio(40%, 45%, 50%), sand-aggrega to ratio(33%, 36%, 39%) were chosen as the experimental parameters. Test variables are temperature of concrete, slump, air contents, compressive and flexural strength. The compressive and flexural strength for 3 hours and 6 hours were tested. As result, it was shown that temperature of concrete involved 45$^{\circ}C$, some time later decreased. The workability were decreasing in steps as the sand-aggregate ratio increased and crushed sand was the highest value. Higher compressive and flexural strength was shown following the order of river sand, sea sand, crushed sand regardless of sand-aggregate ratio. But the values of gap was just a little.