• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.137-147
• /
• 2008

This study evaluated the effects of the human activity and outdoor air on concentrations of size-selective particulate matters (PM) by conducting a realtime measurement in classrooms and on roofs at 4 elementary schools, 3 middle schools and 3 high schools in Incheon City. PM concentrations featured repetitive pattern of increasing during break time (including lunch hours) and cleaning time while decreasing during class hours. This trend was more prominent with inhalable PM and PM10 than fine PMs (PM2.5, PM1.0). The indoor/outdoor (I/O) ratio of inhalable PM and PM10 exceeded 1 while that of fine PMs was close to or below 1. The PM2.5 (out)/PM10 (out) ratio stood at 0.59 (${\pm}0.16$) and the PM2.5 (in)/PM10 (in) ratio was 0.29 (${\pm}0.09$), suggesting that occupant activity had a greater effect upon coarse particles (PM10-PM2.5) than upon fine particles (PM2.5, PM1.0). The correlations between the indoor and the outdoor PM concentrations showed a stronger positive correlation for fine particles than that of coarse particles. The linear regression analysis of PM concentrations indoor and outdoor indicated a higher determinant coefficient ($r^2>0.9$), and consistency for fine particles than in case of coarse particles. In conclusion, the results of this study suggest that the indoor coarse particle concentration is more attributed to occupant activity and the indoor fine particle concentration is more influenced by outdoor air pollution.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.125-134
• /
• 2012

This study examines how the concentration of Fine Particles(PM10: Fine Particles of under Diameter $10{\mu}m$) included in the air influences on the satellite signal transmission frequency band. For the study of satellite signal attenuation rate by the concentration of Fine Particles, the concentration of Fine Particles classified 7 levels, below $50{\mu}g/m^3$, below $100{\mu}g/m^3$, below $200{\mu}g/m^3$, below $400{\mu}g/m^3$, below $800{\mu}g/m^3$, below $1,600{\mu}g/m^3$, below $3,200{\mu}g/m^3$. After then, it analyzed how much each concentration influenced on the satellite signal transmission frequency band.

• Journal of Powder Materials
• /
• v.10 no.1
• /
• pp.57-62
• /
• 2003

The effect of bedding on the microstructure of $Si_3N_4$ added with ultra-fine SiC was investigated. The bedding and the addition of ultra-fine SiC effectively inhibited grain growth of $Si_3N_4$ matrix grain. The microstructures of the specimens sintered with bedding powder consisted of fine-grains as compared with the specimens sintered without bedding powder. In addition, the grain size and the difference of grain size between the specimens sintered with bedding and without bedding was reduced with increasing SiC content. Some ultra-fine SiC particles were trapped in the $Si_3N_4$ grains growed. The number of SiC particles trapped in the $Si_3N_4$ grains increased with increasing the grain growth. When ultra-fine SiC particles were added in the $Si_3N_4$ ceramics, the strength was improved but the toughness was decreased, which was considered to be resulted from the decrease of the grain size.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.444-445
• /
• 2006

Flying trajectories of fine particles within a size range of $10{\sim}60{\mu}m$ were studied during centrifugal atomizing processes. A FORTRAN program was written by using increment method. Calculation results revealed that the drag force might reach very high value of 522-7800 g for fine powder of $10{\sim}60{\mu}m$. Flying distance in horizontal direction could be shortened if the particles fly obliquely due to the huge drug force. On the other hand, very fine powder could be projected to far distances when the atmosphere flow velocity is much stronger. Fortunately such particles could be contracted within a cylinder closed to the atomizer when the atmosphere flow was weaken or retained in a limited diameter.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.989-994
• /
• 1994

This study aims at finding the closest packings of regular shape particles such as sphere, circle rod and hexagonal rod type. As the ratio of particle size to container lowered to less than 1/10, the wall effect decreased gradually. The tap density of spherical particles with almost orthorhombic arrangement was 59.5%, while those of circle rod and hexagonal rod type particles were 63.5% and 63.0% respectively. And it was decreased with increasing the aspect ratio of regular particles. The tap density of binary mixtures was larger than that corresponding to the monosized particles packing by about 15%. The tap density of ternary mixtures was larger than that of corresponding to the packing of binary mixtures by about 9%. This work employed the binary mixture of 60% coarse particles and 40% fine particles with size ratio of 1.0 to 1/10 and the ternary mixture of 60% coarse particles, 20% medium and 20% fine particles with size ratio of 1:1/10:1/400 respectively.

• Journal of Korea Game Society
• /
• v.16 no.6
• /
• pp.101-110
• /
• 2016

Currently, fires caused by fine dust particles are attracting people's attention increasingly. Fine dust particles are $2.5{\mu}m$ (micrometer) in diameter which cannot be seen by the naked eyes could penetrate deeply into the lungs and cause health problems. Although people are aware of the precautions against fine dust particles, they do not take actions because they are less aware of the hazards that fine dust particles can do. This study aims to investigate the effects of artificial and natural causes of fine dust particles. In order to improve awareness of fine dust particle prevention, the <우마이() Escape> board game was developed and tests were carried out to 20 children to find out the educational effects of the board game.

• Journal of Magnetics
• /
• v.4 no.3
• /
• pp.92-97
• /
• 1999

A relationship between microstructure and ferromagnetic resonance of Co/Ag multilayers has been studied in as-deposited and annealed multilayers iwth ultrathin (dCo < 1 nm) Co layers. Depending on the nominal thickness of Co Co/Ag multilayers represent a system of fine magnetic particles (dCo < 0.4 nm) or discontionuous layered structure (dCo/0.5 nm). FMR data has been interpreted in the framework of a odel of interacting fine particles exhibiting superparamagnetic behavior. Changes in the FMR spectra upon annealing have been attributed to the growth of the Co particles and to a transition from the fcc to hcp atomic structure of the highly (111) textured Co particles.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.132-140
• /
• 2007

Concentrations of atmospheric fine particles in Chungnam were measured at 7 sampling sites during 2005. The daily average concentrations of PM 10, PM2.5, and PM1 ranged from 14.9 to $136.5{\mu}g/m^3$, 8.2 to $113.2{\mu}g/m^3$, and 5.7 to $107.5{\mu}g/m^3$, respectively, and the highest levels were observed at Yeongi site. The lowest concentrations for the all size fractions of particulate were observed at Taean located at the west end of the peninsula. The daily average PM10 concentrations were below the current National Standard at all sites, while the daily average PM2.5 concentrations frequently exceeded the US Standard at Cheonan, Dangjin, Boryeong, and Yeongi sites. The frequencies of PM2.5 concentrations exceeding the US standard at Cheonan, Dangjin, Boryeong, and Yeongi were 10.8%, 6.7%, 6.7%, and 26.7%, respectively. In addition, $68{\sim}80%$ of PM10 was in the PM2.5 fraction indicating that fine particles were the major component of atmospheric particles in Chungnam.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.34-41
• /
• 2004

A new method to fabricate the fine magnetic abrasives by using mechanical alloying is proposed. The mechanical alloying process is a solid powder process where the powder particles are subjected to high energetic impact by the balls in a vial. As the powder particles in the vial are continuously impacted by the balls, cold welding between particles and fracturing of the particles take place repeatedly during the ball milling process using a planetary mill. After the manufacturing process, fine magnetic abrasives which the guest abrasive particles c lung to the base metal matrix without bonding material can be obtained. The shape of the newly fabricated fine magnetic abrasives was investigated using SEM and its polishing performance was verified by experiment. It is very helpful to finishing the injection mold steel in final polishing stage. The areal ms surface roughness of the workpiece after several polishing processes has decreased to a few nanometer scales.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.E1
• /
• pp.24-31
• /
• 2008

In this study, a new PM (particulate matter) sampler was developed and fabricated to collect fine particles in the atmosphere, and laboratory and field tests were carried out to evaluate the performance of the sampler. The PM sampler, which was based on impingers, employed an aerosol condensation system as a PM magnifier to improve its collection efficiencies. Sodium chloride, ammonium sulfate and ammonium nitrate aerosols were used as test particles, because these components are rich in ambient aerosols. As a result, it was found that the collection efficiency of the novel PM sampler was very high. Thus, it is believed that the PM sampler is an effective device for sampling fine particles. In addition, it was demonstrated that this work could contribute to the collection or removal of fine particles and be applied to the semicontinuous sampling of ambient aerosols for chemical composition analysis.