• 한국광물학회지
• /
• 제22권1호
• /
• pp.1-11
• /
• 2009

제주도 동남부 신산리 해안가에 분포하는 현무암에 세립질의 맨틀 페리도타이트가 드물게 포획되어 있으며, 반상쇄정 잔류물의 거정질 입자와 세립질의 입자로 구성된 조직적 특성에 의해 반상쇄정의 페리도타이트 맨틀포획암(FPP)으로 정의된다. 조사되어진 FPP들의 서로 유사한 조직적 특성과 주성분원소 조성은 FPP가 하나의 구조 영역에서 유래했음을 지시한다. 또한 킹크밴드를 가지는 거정의 반상쇄정($2{\sim}3mm$) 사이에 변형의 흔적이 없는 세립질의 입자($200{\sim}300{\mu}m$)로 구성된 쌍봉분포, 삼중점과 직선형의 입자경계, 간극사이에 형성된 멜트포켓, 입자경계가 이동했음을 나타내는 미세구조 등은 FPP가 동력재결정작용 ${\pm}$ 정적재결정작용을 경험하였음을 반영하고 있다. 이러한 변형사건에는 멜트/유체의 이동이 있었으며, 특히 엽리면을 따라 일어났다. 신산리 지역에 가장 흔하게 산출되는 프로토그라뉼라 조직의 맨틀포획암과 FPP는 매우 유사한 주성분원소 조성을 보이는데, 이는 FPP가 프로토그라뉼라 조직의 포획암과 비슷한 상부맨틀 깊이에 위치하고 있었음을 나타낸다. 이러한 FPP의 조직적 특성과 주성분원소 조성은 FPP가 지엽적인 소규모의 좁은 영역에 관여한 변형사건을 경험하였음을 나타낸다. 이 변형사건의 실체에 대한 것은 앞으로 좀 더 연구가 진행되어야 할 것이나, 제주도가 만들어지기 이전의 상부맨틀 암석권에서 마그마의 상승과 관련된 단층작용에 의해 형성되었을 가능성을 제시한다.

• 비파괴검사학회지
• /
• 제20권5호
• /
• pp.390-396
• /
• 2000

원자로 재료인 SA 508 Class 3 강용접부 및 열영향부 모사 시험편에 대해서 초음파공명분광법으로 동적탄성계수를 측정하였다. 등방성 탄성계수를 가정하여 초기 추정 탄성 계수, $c_{11},\;c_{12}$ 및 $c_{44}$로부터 장방형 시편의 공명 주파수를 계산하였으며 계산된 주파수와 초음파공명분광법으로 측정된 주파수를 비교, 반복 수렴 절차를 거쳐 정밀한 탄성계수를 구했다. 열처리 조건의 차이 및 미세 조직의 차이에 따라 영률 및 전단 계수의 차이가 확실하게 나타났다. 미세한 베이나이트 조직에서의 영률 및 전단 계수는 조대한 마르텐사이트 조직보다 높았으며 이러한 경향은 미세 경도 시험 등의 다른 실험 결과와도 일치하였다.

• 한국세라믹학회지
• /
• 제43권7호
• /
• pp.439-444
• /
• 2006

Artificial graphite generally manufactured by carbonization sintering of shape-body of kneaded mixture using granular cokes as filler and pitch as binder, going through pitch impregnation process if necessary and finally applying graphitization heat treatment. Graphite materials are used for core internal structural components of the High-Temperature Gas-cooled Reactors (HTGR) because of their excellent heat resistibility and resistance of crack progress. The HTGR has a core consisting of an array of stacked graphite fuel blocks are machined from IG-110, a high-strength, fine-grained isotropic graphite. In this study, crack stabilization and micro-structures were measured by bend strength and fracture toughness of isotropic graphite grade IG-110. It is important to the reactor designer as they may govern the life of the graphite components and hence the life of the reactor. It was resulted crack propagation, bend strength, compressive strength and micro-structures of IG-110 graphite by scanning electron microscope and universal test machine.

• 동력기계공학회지
• /
• 제15권6호
• /
• pp.73-80
• /
• 2011

The experimental investigation focuses on an influence of artificial aging time in longitudinal butt welded Al 6013-T4 aluminum alloy on the fatigue crack growth resistance. The preferred welding processes for this alloy are frequently tungsten inert gas welding (TIG) process due to its comparatively easier applicability and better weldability than other gas metal arc welding. Fatigue crack growth tests were carried out on compact tension specimens (CT) in longitudinal butt TIG welded after T82 heat treatment was varied in three artificial aging times of 6 hours, 18 hours and 24 hours. Of the three artificial aging times, 24 hours of artificial aging time are offering better resistance against the growing fatigue cracks. The superior fatigue crack growth resistance preferred spatial variation of materials within each specimen in the Paris equation based on reliability theory and fatigue crack growth rate by crack length are found to be the reasons for superior fatigue resistance of 24 hours of artificial aging time was compared to other joints. The highest of crack propagation resistance occurs in artificial aging times of 24 hours due to the increase in grain size (fine grained microstructures).

• International Journal of Korean Welding Society
• /
• 제3권2호
• /
• pp.40-45
• /
• 2003

A series of experiments has been carried out to investigate the effect of titanium, boron and nitrogen on the microstructure and toughness of simulated heat affected zone (HAZ) in quenched and tempered (QT) type 490MPa yield strength steels. For acquiring the same strength level, the carbon content and carbon equivalent could be lowered remarkably with a small titanium and boron addition due to the hardenability effect of boron during quenching process. Following the thermal cycle of large heat input, the coarsened grain HAZ (CGHAZ) of conventional quenched and tempered (QT) type 490MPa yield strength steels exhibited a coarse bainitic or ferrite side plate structure with large prior austenite grains. While, titanium and boron bearing QT type 490MPa yield strength steels were characterized by the microstructure in the CGHAZ, consisting mainly of the fine intragranular ferrite microstructure. Toughness of the simulated HAZ was mainly controlled by the proper Ceq level, and the ratio of Ti/N rather than titanium and nitrogen contents themselves. In the titanium­boron added QT steels, the optimum Ti/N ratio for excellent HAZ toughness was around 2.0, which was much lower than the known Ti/N stoichiometric ratio, 3.4. With reducing Ti/N ratio from the stoichiometric ratio, austenite grain size in the coarse grained HAZ became finer, indicating that the effective fine precipitates could be sufficiently obtained even with lower Ti/N level by adding boron simultaneously. Along with typical titanium carbo­nitrides, various forms of complex titanium­ and boron­based precipitates, like TiN­MnS­BN, were often observed in the simulated CGHAZ, which may act as stable nuclei for ferrite during cooling of weld thermal cycles

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.63-71
• /
• 2004

Recently, a sheet forming process of Mg alloys is highlighted again due to increasing demand for Mg wrought alloys in the applications of casings of mobile electronics and outer-skins of light-weight transportation. Microstructure control is essential for the enhancement of workability and formability of Mg alloy sheets. In this research, AZ31 Mg alloy sheets were prepared by hot rolling process and the rolling condition dependency of the microstructure and texture evolution was studied by employing a conventional rolling mill as well as an asymmetric rolling mill. When rolled through multiple passes with a small reduction per pass, fine-grained and homogeneous microstructure evolved by repetitive dynamic and static recrystallization. With higher rolling temperature, dynamic recrystallization was initiated in lower reduction. However with increasing reduction per pass, deformation was locallized in band-like regions, which provided favorable nucleation sites f3r dynamic recrystallization. Through post annealing process, the microstructures could be transformed to more equiaxed and homogeneous grain structures. Textures of the rolled sheets were characterized by $\{0002\}$ basal plane textures and retained even after post annealing. On the other hand, asymmetrically rolled and subsequently annealed sheets exhibited unique annealing texture, where $\{0002\}$ orientation was rotated to some extent to the rolling direction and its intensity was reduced.

• 한국재료학회지
• /
• 제10권10호
• /
• pp.671-676
• /
• 2000

본 연구에서는 부분산화한 Ti 분말을 첨가한 $BaTiO_3$계 세라믹스를 진공중 $1350^{\circ}C$에서 1 h 소결하여 제조하였다. 공기중 가열후 전기적 성질과 미세조직에 미치는 부분산화한 Ti분말 첨가량의 효과를 조사하였다. 그 결과, 5~7vol%의 부분산화한 Ti분말을 첨가한 반도성 $BaTiO_3$계 세라믹스는 비정항의 변화크기가 $10^5$이상인 우수한 PTCR 특성을 나타내었고 또한, 고다공질과 미립화된 조직을 얻을 수 있었다. 5 vol%의 부분산화한 Ti 분말을 첨가한 $BaTiO_3$계 세라믹스의 상대밀도와 입도는 각각 54%, $1.3\;{\mu\textrm{m}}$였다. 부분산화한 Ti 분말의 첨가에 의한 $BaTiO_3$계 세라믹스의 PTCR 특성 발현은 입계에서의 산소 흡착에 기인하였는데, 이는 Heywang모델로써 설명할 수 있었다.