• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1528-1537
• /
• 2005

The purpose of this study is investigated the method for estimation of the liquefaction on the reclaimed land, located in Incheon and assessed the ability of liquefaction under the condition of criteria, which is the magnitude '6.5' of seismic on the basis of the domestic seismic characteristics. Performed not only field test but the experiment as well to study how the fine content would affect into the dreging and reclaimed land and also estimated the safety factor through the empirical method and anticipated detail method based on the results. Within the reclaimed land, there are many sized soils which are almost extended from well-graded silty sand(SM) to poor-graded fine grained sand, and which have the condition, so called, the liquefaction which is easily to bring into under the circumstances within the ground. However, partly, now that the soil is mixed with silt and silty clay which include the content of fine grained dust quite a bit, the difficulties and inconveniences has been expected while trying to find the ratio of cyclic resistance, but finally Seed and Idriss method showed the most way when we estimate the safety factor on the liquefaction.

• The Journal of Bigdata
• /
• 제4권2호
• /
• pp.105-114
• /
• 2019

Missing value replacement is one of the big issues in data analysis. If you ignore the occurrence of the missing value and proceed with the analysis, a bias can occur and give incorrect results for the estimate. In this paper, we need to find and apply an appropriate alternative to missing data from weather data. Through this, we attempted to clarify and compare the simulations for various situations using existing methods such as MICE and MissForest based on R and time series-based models. When comparing these results with each variable, it was determined that the kalman filter of the auto arima model using the ImputeTS package and the MissForest model gave good results in the weather data.

• Journal of the Korean Home Economics Association
• /
• 제35권2호
• /
• pp.173-186
• /
• 1997

The purpose of this study is to find out understand the resident's subjective responses to physical indoor environment. The questionnaire survey was carried out to measure form Jan. 8th to Feb. 2th in 1996, the typical external climate of winter in Korea. The subjects were four hundred and eleven housewives, living in apartments of RC structure I Ilsan apartment complex. As the result, residents usual ventilate once or twice a day by opening outward windows for about ten minutes. Unpleasant smell producted by cooking and wet garbage made most of them negatively respond to kitchen's air quality. regression analysis of relativeness between sense of air freshness smell, dust and comfort revealed that sense of comfort was the most highly related with the extent of bad smell. Housing factors such as size of apartments and ventilating, smoking and gas usage had significant effects on indoor air quality and the subjective responses in winter. Therefore it is especially important to consider air pollution problem from the beginning stage when planning small apartments. It is required that the government of environment has to emphasize the importance of ventilation to residents, and makes an effort to establish the design criteria on indoor air quality in house.

• The Bulletin of The Korean Astronomical Society
• /
• 제37권1호
• /
• pp.39.1-39.1
• /
• 2012

Nuclear rings in barred galaxies are sites of active star formation (SF). We investigate SF and its feedback effects occurring in barred galaxies, for the first time, using high-resolution grid-based hydrodynamic simulations. The gaseous medium is assumed to be infinitesimally thin, isothermal, and unmagnetized. The SF recipes include a density threshold corresponding to the Jeans condition, a SF efficiency of 1%, and momentum feedback via Type II supernova events together with stellar-wind mass loss. To investigate various environments, we vary the gas sound speed as well as the efficiency of momentum injection in the in-plane direction. We find that when the sound speed is small, the surface density of a ring becomes largely independent of the azimuthal angle, resulting in star-forming regions distributed over the whole length of the ring. When the sound speed is large, on the other hand, the ring achieves the largest density at the contact points between the dust lanes and the ring where SF occurs preferentially, leading to a clear age gradient of star clusters in the azimuthal direction. Since rings shrink with time, a radial age gradient of star clusters naturally develop regardless of sound speed, consistent with observations. SF persists over 200 Myr, with an average rate of ${\sim}1.3M_{\odot}/yr$ similar to observed values. Rings gradually become hostile to SF as they lose gas into stars and turbulent motions dominate.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.51-55
• /
• 2005

This study addresses the contamination sensitivity test of a typical fuel pump for an automotive vehicle. The objective of the study is to find the contamination sensitivity coefficient of a fuel pump on specific contaminant particle sizes so that an optimal fuel filter could be selected. To achieve the objective, the degradation of discharge flow rate of the fuel pump is measured under the experiments of various contaminants size ranges of ISO test dust up to $80\;{\mu}m$. The fundamental theory of contamination sensitivity is introduced and the contamination sensitivity coefficients are estimated using the experimental data. Maximum contamination sensitivity coefficient of $5\chi\;10^{-6}\;L/min{\cdot}Ea$ is found in the contaminant size range of $40\;{\mu}m\~50\;{\mu}m$. The magnified picture of the surface of vane disc reveals that the abrasive wear is the principal cause of discharge flow rate degradation. Hence, this study reveals that a high efficiency filter for contaminant particles especially in the size range of $30\;{\mu}m\~70\;{\mu}m$ especially should be used to maintain the service life of the fuel filter.

• Proceedings of the Korean Reliability Society Conference
• /
• 한국신뢰성학회 2011년도 춘계학술발표대회 논문집
• /
• pp.107-113
• /
• 2011

The windshield wiper consists of 4 parts: a blade, an arm, a linkage and a motor. The wiper blade makes contact with the windshield and is designed to be operated normally at an angle of 30~50 degrees to the front glass. If the contact pressure between the wiper blade and windshield surface is too high, noise and wear of the rubber will result. On the other hand, if the contact pressure is too low, the performance will do badly, since foreign substances such as dust and stains will not be removed well. The pressure and friction of the wiper blade has a great influence on its effectiveness in cleaning the front window. This is due to the contact of the rubber with the window. This paper presents the dynamic analysis method to estimate the performance of the flat type blade of the wiper system. The blade has a nonlinear characteristic since the rubber is an incompressible hyper-elastic and visco-elastic material. Thus, Structural dynamic analysis using a complex contact model for the blade is performed to find the characteristics of the blade. The flexible multi-body dynamic model is verified by the comparison between test and analysis result. Also, the optimization using the central composite design table is performed.

• The Bulletin of The Korean Astronomical Society
• /
• 제35권2호
• /
• pp.52.2-52.2
• /
• 2010

107P/(4015) Wilson-Harrington is one of possible candidates of the dormant or inactive comet nuclei. It was discovered on a photographic plate exposed with the 48-inch Schmidt at Palomar Observatory on 1949 November 19 UT, displaying the faint extended cometary tail. No comet activity has not been after 1949 apparition. Here we present the optical observations of 107P/(4015) Wilson - Harrington during 2009/2010 apparition taken in search of low-level comet activity. Our photometric and spectroscopic data were collected 28 - 86 days after the perihelion passage on 2009 October 22 in a wide range of solar phase angle of 39-68 degree. A disk-integrated phase function was constructed, giving a geometric albedo of 0.055+/-0.012, phase integral of q=0.34, and Bond albedo of A_B=0.019. The photometric property shows profile similar to low albedo asteroids and comet nuclei. Any emission lines were found in our spectrum, giving a flat reflectance similar to low albedo asteroids. Although we could not find any evidence for the comet activity in our photometric and spectroscopic data, we found an upper limit of the fractional active area of 0.001%. We derived the upper limit of the optical depth of the dust trail and tail 7x10^{-10}. We conclude that 107P/(4015)Wilson-Harrington became completely dormant or inactive in 2009/2010 return.

• The Bulletin of The Korean Astronomical Society
• /
• 제43권1호
• /
• pp.59.3-59.3
• /
• 2018

With a recent observational study of extended Lyman-alpha halos around individual high-z star-forming galaxies by Leclercq et al. (2017) using MUSE, we perform radiative transfer calculations to see if Lyman-alpha scattering can explain the spatial extents of the halos together with their spectra. We adopt a spherically-symmetric halo model in which Lyman-alpha sources and neutral hydrogen (HI) medium have exponential density distributions. The HI medium is set to have outflowing motion based on a momentum-driven wind scenario in a gravitational potential well. We run our Lyman-alpha radiative transfer code, LaRT, upon this halo model for various sets of parameters regarding the HI medium such as temperature, optical depth, density scale radius, outflow velocities, and dust content. We analyze simulation results to see the impact of each parameter on Lyman-alpha spectra and surface brightness profiles, and degeneracies between the parameters. We also find a parameter set that best reproduces simultaneously the observed spectra and surface brightness profiles of the MUSE Lyman-alpha halos.

• The Bulletin of The Korean Astronomical Society
• /
• 제43권1호
• /
• pp.45.2-45.2
• /
• 2018

CS molecule is known to be adsorbed onto dust in cold dense cores, causing its significant depletion in the center region of cores. This study is aimed to investigate the depletion of CS molecule with optically thin $C^{34}S$ molecular line observations, including significance of its differentiation depending on the evolutionary status of the dense cores. We mapped five evolved starless cores, L1544, L1552, L1689B, L694-2 and L1197 using two molecular lines, $C^{34}S$ (J=2-1) and $N_2H^+$ (J=1-0) with NRO 45 m telescope. The $H^2$ column density and temperature structures of each targets were obtained by SED fitting for Herschel continuum images and the internal number density profiles by model fitting. All of the integrated intensity maps of $C^{34}S$ show depletion holes and 'semi-ring-like' distribution, indicating that the depletion of CS is clear and general. The radial profiles of CS abundance also show significant decrease towards the core center, while $N_2H^+$ abundance is almost constant or enhanced. We find that the more evolved cores with higher $H^2$ density tend to have a stronger depletion of CS. Our data strongly support claims that CS molecule generally depletes out in the central regions of starless dense cores and such chemical differentiation is closely related to their evolution.

• Korean Journal of Occupational Health Nursing
• /
• 제29권1호
• /
• pp.58-68
• /
• 2020

Purpose: Workers with chronic health problems find it difficult to maintain their work because of socioeconomic difficulties. The purpose of this study was to evaluate the relationships between physical, ergonomic, and mental health hazards in the workplace and chronic health problems of Korean workers. Methods: A total of 28,807 wage workers participated in the study and were selected using the Fifth Korean Working Conditions Survey (2017). Multiple logistic regression analysis was used to determine the associations between physical, ergonomic, and mental health hazards and chronic health problems. Results: Of the participants, 1,220 (4.23%) had chronic health problems. Even after adjusting the general characteristics, vibration, noise, high temperature, low temperature, dust, chemical and cigarette smoke, fatigue and painful posture, dragging or pushing or moving of heavy objects, repetitive hand or arm movements, working with a computer or smartphone, use of internet or e-mail, and anxiety situations increased the risk of chronic health problems. Conclusion: The study reaffirms that exposure of physical, ergonomic, and mental health hazards in the workplace significantly increases the risk of chronic health problems.