• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.3
• /
• pp.249-257
• /
• 2008

The authors performed the clinical and radiographic evaluation in the 29 patients with sinus bone graft and $Osstem^{(R)}$ implant placement between Sep 2003 and Jan 2006 and got the following results. 1. Fifteen complications developed in the 13 patients. Intraoperative sinus membrane perforation and postoperative maxillary sinusitis developed frequently. 2. The mean preoperative residual alveolar bone height was 4.5 mm, postoperative height 18.5 mm, height 1 year after operation 16.9 mm. 3. Three primary osseointegration failures(3.7%) developed in 3 patients. 4. The survival rate of prosthodontics was 100% at the final follow up. The mean marginal bone resorption around the implants was 0.69 mm 1 year after prosthodontic loading. Marginal bone resorption more than 1.5 mm developed in nine implants and the success rate was 88%.

• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.517-522
• /
• 2010

Selective laser melting (SLM) is emerged as a new manufacturing technique to directly fabricate precise parts using metallic materials. The final characteristics of a component fabricated through the SLM process are strongly dependent upon various parameters such as laser power, scan rate and pulse duration, etc. This paper, therefore, focuses on the dimensional characteristics of melted $20{\mu}m$ Fe-Cr-Ni powder by fiber laser for the selective laser melting process. With energy density decrease, the height and depth were decreased. Although the conditions are of the same energy density, the shape is different by laser power and scan rate. The shapes at various laser parameters were divided into 3 groups based on depth over height. The smooth regular shape is obtained under the conditions of $50{\mu}m$ of powder height and $15-20{\mu}s$ of pulse duration. And the laser power influenced the variation of shape more significantly than the scan rate.

• Structural Engineering and Mechanics
• /
• v.72 no.4
• /
• pp.479-489
• /
• 2019

The corrosion of reinforcement leads to a gradual decay of structural strength and durability. Several models for crack occurrence prediction and crack width propagation are investigated in this paper. Analytical and experimental models were used to predict the bond strength in the period of corrosion propagation. The manner of flexural strength loss is calculated by application of these models for different scenarios. As a new approach, the variation of the concrete beam neutral axis height has been evaluated, which shows a reduction in the neutral axis height for the scenarios without loss of bond. Alternatively, an increase of the neutral axis height was observed for the scenarios including bond and concrete section loss. The statistical properties of the parameters influencing the strength have been deliberated associated with obtaining the time-dependent bending strength during corrosion propagation, using Monte Carlo (MC) random sampling method. Results showed that the ultimate strain in concrete decreases significantly as a consequence of the bond strength reduction during the corrosion process, when the section reaches to its final limit. Therefore, such sections are likely to show brittle behavior.

• Advances in nano research
• /
• v.10 no.2
• /
• pp.129-138
• /
• 2021

In present article, utilizing the Love shell theory with volume fraction laws for the cylindrical shells vibrations provides a governing equation for the distribution of material composition of material. Isotopic materials are the constituents of these rings. The position of a ring support has been taken along the radial direction. The Rayleigh-Ritz method with three different fraction laws gives birth to the shell frequency equation. Moreover, the effect of height- and length-to-radius ratio and angular speed is investigated. The results are depicted for circumferential wave number, length- and height-radius ratios with three laws. It is found that the backward and forward frequencies of exponential fraction law are sandwich between polynomial and trigonometric laws. It is examined that the backward and forward frequencies increase and decrease on increasing the ratio of height- and length-to-radius ratio. As the position of ring is enhanced for clamped simply supported and simply supported-simply supported boundary conditions, the frequencies go up. At mid-point, all the frequencies are higher and after that the frequencies decreases. The frequencies are same at initial and final stage and rust itself a bell shape. The shell is stabilized by ring supports to increase the stiffness and strength. Comparison is made for non-rotating and rotating cylindrical shell for the efficiency of the model. The results generated by computer software MATLAB.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.4
• /
• pp.251-257
• /
• 2007

Objective : This multi-center clinical study was designed to determine the long-term results of patients who received a one-level posterior lumbar interbody fusion with expandable cage ($Tyche^{(R)}$ cage) for degenerative spinal diseases during the same period in each hospital. Methods : Fifty-seven patients with low back pain who had a one-level posterior lumbar interbody fusion using a newly designed expandable cage were enrolled in this study at five centers from June 2003 to December 2004 and followed up for 24 months. Pain improvement was checked with a Visual Analogue Scale (VAS) and their disability was evaluated with the Oswestry Disability Index. Radiographs were obtained before and after surgery. At the final follow-up, dynamic stability, quality of bone fusion, interveretebral disc height, and lumbar lordosis were assessed. In some cases, a lumbar computed tomography scan was also obtained. Results : The mean VAS score of back pain was improved from 6.44 points preoperatively to 0.44 at the final visit and the score of sciatica was reduced from 4.84 to 0.26. Also, the Oswestry Disability Index was improved from 32.62 points preoperatively to 18.25 at the final visit. The fusion rate was 92.5%. Intervertebral disc height, recorded as $9.94{\pm}2.69\;mm$ before surgery was increased to $12.23{\pm}3.31\;mm$ at postoperative 1 month and was stabilized at $11.43{\pm}2.23\;mm$ on final visit. The segmental angle of lordosis was changed significantly from $3.54{\pm}3.70^{\circ}$ before surgery to $6.37{\pm}3.97^{\circ}$ by 24 months postoperative, and total lumbar lordosis was $20.37{\pm}11.30^{\circ}$ preoperatively and $24.71{\pm}11.70^{\circ}$ at 24 months postoperative. Conclusion : There have been no special complications regarding the expandable cage during the follow-up period and the results of this study demonstrates a high fusion rate and clinical success.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.205-216
• /
• 2002

This study was conducted to examine the effect of long-day (LD) period before short-day (SD) treatment on the vegetative growth of greenhouse-grown cut chrysanthemum cv. Reagan Improved at Wageningen Agricultural University, The Netherlands. Rooted cuttings of cut chrysanthemum cv, Reagan Improved were transplanted on 6th, 13th, 20th of September and all of them were treated with LD before SD treatment on 27th of September, The periods from transplanting until final harvest were 70, 77, and 84 days for 1, 2, and 3 week-LD treatment, respectively. The final plant height increased in the plot of 3 week-LD period and decreased in the plot of 1 week-LD period before the SD treatment. Total fresh weight and the leaf area were increased more in the plot of 3 week-LD period than that of 1 week-LD period, but the absolute growth rate after SD treatment was the same on plant growth rate and increase of the number of leaves in all treatments. The final dry matter production (g.m$^{-2}$ ) was increased more in the plot of 3 week-LD period than that of 1, 2week-LD period before SD treatment. Plant height and fresh weight were followed by the condition of LD period. In addition, dry mass production was highest in 3 week-LD period.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.407-419
• /
• 2012

It is difficult to obtain the accurate and homogeneous height information over the whole Korea due to the effect of different vertical datums have been divided into land and sea part. In this study, we tried to unify the different vertical datums using the precise spirit leveling between TBM (tidal bench mark) and BM (bench mark) in order to solve the problems caused by different vertical datums. For this, the vertical datum offsets at observed points which were calculate from leveling results and then transformation model of vertical datum will be modelled using calculated offsets along the coastal line. For suggesting the precise modelling method to vertical datum transformation, we analyzed results from various interpolation methods such as Spline and LSC method. As the results from analysis, the LSC method combined with 4-parameters trend model is more suitable for modelling the offsets between vertical datums. The final transformation model of vertical datum using the combination of LSC and 4-parameter model which provides the transformation accuracies of ${\pm}10.4cm{\sim}14.8cm$ level. And, the software for vertical datum transformation that was also developed using the final model in order to convert the height information included in various spatial data effectively. Therefore, the transformation model between vertical datums of land and sea part, which is developed in this study, is expected to minimize the confusion caused by mismatch of height information in the use of spatial data, and it also can be minimize economic and time losses in various application fields such as coastal development project, coastal disaster prevention, etc.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.4
• /
• pp.365-371
• /
• 2012

Objective : To document lumbar lordosis (LL) of the spine and its change during surgeries with the different height but the same angle setting of the anterior cage. Additionally, we attempted to determine if sufficient LL is achieved at different cage heights and to quantify the change in LL during multi-level anterior lumbar interbody fusion (ALIF). Methods : The medical records and radiographs of 42 patients who underwent more than 2 level ALIFs between 2008 and 2009 were retrospectively reviewed. We evaluated 3 parameters seen on lateral whole spine radiographs : LL, pelvic incidence (PI), and sagittal vertical axis (SVA). The mean follow-up time was 28.1 months and the final follow-up radiographs of all patients were reviewed at least 2 years after surgery. Statistical analysis was performed using the paired t-tests. Results : Lumbar lordosis had changed up to 30 degrees immediately and 2 years after surgery (preoperative mean LL, SVA : 22.45 degrees, 112.31 mm; immediate postoperative mean LL, SVA : 54.45 degrees, 37.36 mm; final follow-up mean LL, SVA : 49.56 degrees, 26.95 mm). Our goal of LL is to obtain as much PI as possible, preoperative mean PI value was $55.38{\pm}3.35$. The pre-operative and two year post-surgery follow-up mean of the Japanese Orthopedic Association score were $9.2{\pm}0.6$ and $13.2{\pm}0.6$ (favorable outcome rate : 95%), respectively. In addition, we were able to obtain good clinical outcomes and sagittal balance with a subsidence rate of 22.7%. Conclusion : We were able to achieve sufficient LL, such that it was similar to the PI, utilizing multi-level ALIF with the use of a tall cage with the same angle setting of the cage. We have found out that achieving sufficient lumbar lordosis and sagittal balance require an anterior lumbar cage with high angle and height.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.639-644
• /
• 2011

The purpose of this study was to provide quantified data on the throwing skills of world-class athletes and to analyze the kinematic variables for women shot-putters at the IAAF World Championships Daegu 2011. Three-dimensional motion analyses of the eight players who qualified for the final round were carried out to obtain the data. The Kwon3D XP program was used for image analysis of the kinematic data, which included the configurations of each joint. The following conclusions were arrived at. The throwing distance increased with an increase in the release speed, and a significant correlation (p <. 01) was observed between the throwing distance and release speed. It was also shown that players using the spin technique increased their release speed with a fast shoulder-rotation-angle speed. The release height varied with their height and showed a significant difference with the record. This showed that the release angle did not greatly influence the record for the game, but varied with their technical and physical characteristics. Therefore, an increase in release speed is required to improve the record.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.952-958
• /
• 2004

Effects of normal (non-waxy) and waxy millet flours on properties of sponge cake were examined. Total dietary fiber contents of normal and waxy millets were 5.04 and 5.12%, respectively, while that of soft wheat flour was 2.23%. Alkaline water retention capacity value generally increased with addition of normal and waxy millet flours, whereas peak, minimum, and final viscosities decreased. Mixing time and mixing height decreased with addition of millet flour. Lightness of cake crust increased with addition of normal millet flour, whereas it decreased with addition of waxy millet flour, tightness of cake crumb decreased as the amount of normal and waxy millet flours increased. Increasing proportions of normal and waxy millet flours resulted in significantly decreased loaf volume. Replacement of 10% wheat flour by both normal and waxy millet flours did not significantly affect characteristics of sponge cake, but addition of more than 20% millet flour resulted in significant differences in quality characteristics.