• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.666-682
• /
• 2010

The forecasting system for Today's and Tomorrow's PM10 was developed based on the statistical model and the forecasting was performed at 9 AM to predict Today's 24 hour average PM10 concentration and at 5 PM to predict Tomorrow's 24 hour average PM10. The Today's forecasting model was operated based on measured air quality and meteorological data while Tomorrow's model was run by monitored data as well as the meteorological data calculated from the weather forecasting model such as MM5 (Mesoscale Meteorological Model version 5). The observed air quality data at ambient air quality monitoring stations as well as measured and forecasted meteorological data were reviewed to find the relationship with target PM10 concentrations by the regression analysis. The PM concentration, wind speed, precipitation rate, mixing height and dew-point deficit temperature were major variables to determine the level of PM10 and the wind direction at 500 hpa height was also a good indicator to identify the influence of long-range transport from other countries. The neural network, regression model, and decision tree method were used as the forecasting models to predict the class of a comprehensive air quality index and the final forecasting index was determined by the most frequent index among the three model's predicted indexes. The accuracy, false alarm rate, and probability of detection in Tomorrow's model were 72.4%, 0.0%, and 42.9% while those in Today's model were 80.8%, 12.5%, and 77.8%, respectively. The statistical model had the limitation to predict the rapid changing PM10 concentration by long-range transport from the outside of Korea and in this case the chemical transport model would be an alternative method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.6
• /
• pp.621-629
• /
• 2008

Procedures involved in the refinement of the regional geoid for the area encompassing the Korean peninsula and the East Sea are described, and the computational results are provided. A comparison between the geoid height data, the mean sea surface height and the final product of the refinement work is provided and analyzed. The regional marine geoid thus refined seems to have a better resolution, in terms of its correlation with the bathymetry, and shows the bottom features in a more detailed manner when compared with previously used procedures. The general pattern of the computed geoid profile matches reasonably well with the existing studies, where the correlations between the refined regional marine geoid and the bathymetry are (1) 0.44 for the area $117{\sim}142.5^{\circ}E/24{\sim}52^{\circ}N$ and (2) 0.47 for the area $127{\sim}142.5^{\circ}E/32{\sim}50^{\circ}N$ in the East Sea respectively.

• Development and Reproduction
• /
• v.10 no.4
• /
• pp.215-225
• /
• 2006

Precocious puberty is defined as the appearance of secondary sex characteristics before age 8 years in girls (or menarche before age 9 years) and before 9 years in boys. The age of onset of puberty is progressing to younger age. The pubertal activation of gonadotrophin releasing hormone(GnRH) release requires coordinated changes in excitatory or inhibitory amino acids, growth factors, and a group of transcriptional regulators. A number of factors affecting precocious puberty were explored, including the role of genetic factors, nutrition(body fat) and exposure to endocrine disrupting chemicals. In addition to the psychosocial disturbances associated with precocious puberty, the premature pubertal growth spurt and the accelerated bone maturation result in reduced adult height. Precocious puberty may be gonadotrophin-dependent premature activation of the GnRH pulse generator or gonadotrophin-independent. In rapidly progressing central precocious puberty, GnRH agonists appear to increase final height. However more data on the effect and long-term safety of GnRHa are needed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.3
• /
• pp.293-304
• /
• 2022

Recently, the frequency of installation of ventilation towers is increasing due to the planning and construction of underground roads and long tunnel. In this study, implications and points for improvement were considered through investigation and analysis of the installation standards related to ventilation towers in tunnels and analysis of ventilation tower installation cases in domestic and overseas tunnel case study. As a result of this study, when selecting the location and height of the ventilation tower, it is recommended to determine the final ventilation tower type through a consultation process with residents, considering the environmental impact caused by the emission of pollutants, the harmonious arrangement with the surrounding landscape, and the efficient use of the above-ground site nearby ventilation tower. In addition, from the design stage, it is judged that a detailed review of reducing the height of the ventilation tower through air quality simulation is necessary for natural harmony with the surrounding topography and to prevent civil complaints.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.462-470
• /
• 2022

The addition of dietary proteases (PRO) to weaner diets hydrolyzes soybean-based anti-nutritive factors and improves weaned pig's dietary digestibility and growth performance. Therefore, this study explores the effects of PRO in a lower crude protein (CP) level diet than that in a commercial diet on the growth performance, nutrient digestibility, and intestinal morphology of weaned pigs. A total of 90 weaned pigs were randomly assigned to 3 dietary treatments with 6 pigs per pen and 5 replicated pens per treatment using a randomized complete block design (block = body weight [BW]): 1) a commercial weaner diet as a positive control (PC; phase1 CP = 23.71%; phase2 CP: 22.36%), 2) lower CP diet than PC as a negative control (NC; 0.61% less CP than PC), and 3) an NC diet with 0.02% PRO. Pigs fed PC and PRO had higher (p < 0.05) final BW, average daily gain, and/or gain to feed ratio for the first three weeks and the overall experimental period than NC. The PC and PRO groups had greater (p < 0.05) apparent ileal digestibility of dry matter, CP, and energy than the NC group. Moreover, pigs fed PC and PRO increased (p < 0.05) apparent total tract digestibility of CP compared with those fed NC. In addition, the PRO group had a higher number of goblet cells than the PC and NC groups. However, pig fed PC and PRO increased (p < 0.05) villus height and height to crypt depth ratio in the ileum compared with those fed NC. In conclusion, PRO supplementation in a commercial weaner diet with low CP levels improves growth rate and nutrient digestibility by modulating the intestinal morphology of weaned pigs.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.957-963
• /
• 2021

The study aimed to investigate the effects of supplemented sodium butyrate on the in vitro rumen fermentation and growth performance of Hanwoo calves. In total, four treatments were employed according to the sodium butyrate levels: no addition (control), an addition of 0.1% (treatment 1), an addition of 0.3% (treatment 2), and an addition of 0.5% (treatment 3). After 48 hours of fermentation, the ruminal pH was found to be higher in T1 than in C. Total volatile fatty acids were significantly higher in T2 and T3 than in C. The ratio of acetate and propionate was significantly lower in T1 and T3 than in C. In this study, the optimal concentration to promote rumen fermentation was found to be 0.3%, i.e., T2, and an experiment on Hanwoo calves at a farm was conducted. However, there were no significant differences between the treatment groups in terms of the daily weight gain, feed conversion ratio, and final body weight in the feeding experiment. Also, there were no significant differences in the body length, withers height, and height at hip cross between the control and the treatment groups. The addition of 0.3% sodium butyrate was most effective at promoting in vitro rumen fermentation, but it did not significantly affect the growth performance when fed to Hanwoo calves. This indicates that the addition of sodium butyrate improved rumen fermentation but did not have a growth-promoting effect. Future studies need to compare growth and carcass performance outcomes to confirm long-term effects.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.241-256
• /
• 2010

This study intends to develop an aerodynamic girder for suspension bridge with width corresponding to 1/70 of the main span length. In the first step of present study, parametric study for the effects of major structural properties on aerodynamic stability of bridges was performed. The span length and natural frequency of bridges were found to be free from girder width, girder height, and aspect ratio of width to height. The empirical equation according to confidence interval was proposed to estimate the natural frequencies of bridges from span length. From the sensitivity analysis, it was revealed that the torsional frequency was dominant parameter among various structural properties that affected flutter velocity mostly. The final aerodynamic bridge section which satisfied the flutter criteria was found from section wind tunnel tests for 30 cross sectional models. The aerodynamic stability of the developed cross section was verified by multimode flutter analysis. The present economical cross section can be used for long span suspension bridge.

• Journal of Periodontal and Implant Science
• /
• v.54 no.2
• /
• pp.108-121
• /
• 2024

Purpose: The aim of this study was to compare changes in soft and hard tissue and the histologic composition following early implant placement in sites with alveolar ridge preservation or spontaneous healing (SH), as well as implant performance up to 1 year after crown insertion. Methods: Thirty-five patients with either intact buccal bone plates or dehiscence of up to 50% following single-tooth extraction of incisors, canines, or premolars were included in the study. They were randomly assigned to undergo one of three procedures: deproteinized bovine bone mineral with 10% collagen (DBBM-C) covered by a collagen matrix (DBBM-C/CM), DBBM-C alone, or SH. At 8 weeks, implant placement was carried out, and cone-beam computed tomography scans and impressions were obtained for profilometric analysis. Patients were followed up after the final crown insertion and again at 1 year post-procedure. Results: Within the first 8 weeks following tooth extraction, the median height of the buccal soft tissue contour changed by -2.11 mm for the DBBM-C/CM group, -1.62 mm for the DBBM-C group, and -1.93 mm for the SH group. The corresponding height of the buccal mineralized tissue changed by -0.27 mm for the DBBM-C/CM group, -2.73 mm for the DBBM-C group, and -1.48 mm for the SH group. The median contour changes between crown insertion and 1 year were -0.19 mm in the DBBM-C/CM group, -0.09 mm in the DBBM-C group, and -0.29 mm in the SH group. Conclusions: Major vertical and horizontal ridge contour changes occurred, irrespective of the treatment modality, up to 8 weeks following tooth extraction. The DBBM-C/CM preserved more mineralized tissue throughout this period, despite a substantial reduction in the overall contour. All 3 protocols led to stable tissues for up to 1 year.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.1
• /
• pp.123-132
• /
• 2014

This study aims to develop the diagnostic evaluation method of the riverine ecobelt for construction, conservation, and maintenance of the riverine ecobelt. The value indices in the proposed evaluation method are composed of total 5 fields and 19 elements. The 5 fields are flood control, environmental function, growth of plants, ecobelt function, and restoration potential. Flood control field is composed of total 3 elements such as length, width, and density of green area. Environmental function field is composed of 4 elements such as park use, landscape boundary and edge, microclimate control, non-point pollution control. Growth of plants field is composed of 6 elements such as species composition, forest height, stratum structure, vine plants, plant vitality, and succession of plants. Ecobelt function field is composed of 4 elements such as longitudinal connectivity, lateral connectivity, in-stream forest or habitat, roads on bank top. Restoration potential field is composed of 2 elements such as landform and land use of the immediate vicinity. The score system ranging 1~4 was adopted. The weighting parameters of elements were unified with each other. The final grade system ranging 1~5(1: very good~5: very bad) was adopted, and the final grade was evaluated by the mean values of each field. According to the test application of the diagnostic evaluation method of the riverine ecobelt, the final grades showed effectively the real condition of each site.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.2
• /
• pp.105-115
• /
• 2012

Necessity of demonstration test to evaluate the structural integrity of a basket for accident conditions arose during license approval procedure for the WSPP's dry storage facility named MACSTOR/KN-400. A drop test facility for demonstration was constructed in KAERI site and demonstration tests for basket drop were conducted. As the upper welding region of a loaded basket was collided with a dropped basket during the drop test, the welding in this region was fractured and leakage happened after the drop test. The enhancement of basket design was needed since the existing basket design was not able to satisfy the performance requirement. The directions for design modification were determined and six enhanced designs were derived based on these directions. Structural analyses and specimen tests for each enhanced design were conducted. By evaluating structural analysis results and test results, one among six enhanced designs was decided as a final design for revision. The final design was the one to reduce the height of central post of a basket and to decrease the impact velocity with a dropped basket. Test basket models were fabricated with accordance with the final enhanced design. Additional demonstration test was performed for this test model and all the performance requirements were satisfied.