• Tunnel and Underground Space
• /
• v.23 no.2
• /
• pp.110-119
• /
• 2013

It is generalized to measure the arch settlement and convergence during tunnel construction for monitoring its mechanical stability. The initial convergence rate a day is defined from the first convergence measurement and the final convergence defined as the convergence measured lastly. The initial and the final tunnel arch settlement are defined like the preceding convergence. In the study, the relations between the initial and final displacements of a shallow tunnel are analyzed. The measurements were performed in the tunnel of subway 906 construction site in Seoul. The overburden is 10-20 m and the tunnel goes through weathered soil/rock. The width and height of the tunnel are about 11.5 m, 10m, respectively. So this is a shallow tunnel in weak rock. The length of tunnel is about 1,820 m and the tunnel was constructed in 2 stages, dividing upper and lower half. The numbers of measurement locations of arch settlement and convergence are 184 and 258, respectively. As a result, the initial displacement rate and the final displacement are comparatively larger in the section of weathered soil.

• The Journal of Korean Association of Computer Education
• /
• v.6 no.4
• /
• pp.95-113
• /
• 2003

We introduce an AFES(Adaptive Fuzzy Evaluation System) that applies an evaluation system used to existing LCMS(Learning Contents Management System) to a fuzzy reasoning rule. The AFES confers a course level on the learner through a fuzzy diagnostic evaluation before the learner enters a learning course. After the learner completes a learning course through the tailored learning path that is suitable for the learner's level, the AFES confers a final grade on the learner by means of fuzzy final evaluation. The biggest characteristic of the AFES is a grade rule of the final grade. Although different learners get the same number of correct answers to the same number of Questions, AFES flexibly confers the different final grade on the learner by means of the number of 125's fuzzy reasoning rules.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.1
• /
• pp.41-47
• /
• 2019

PURPOSE. Surface finishing of a zirconia restoration is essential after clinical adjustment. Herein, we investigated the effects of a surface finishing protocol for monolithic zirconia on final roughness and bacterial adherence. MATERIALS AND METHODS. Forty-eight disk-shaped monolithic zirconia specimens were fabricated and divided into four groups (n = 12) based on initial surface treatment, finishing, and polishing protocols: diamond bur+polishing bur (DP group), diamond bur+stone grinding bur+polishing bur (DSP group), no diamond bur+polishing bur (NP group), and no diamond bur+stone grinding bur+polishing bur (NSP group). Initial and final surface roughness was measured with a profilometer, and shown using scanning electron microscope. Bacterial adhesion was evaluated by quantifying Streptococcus mutans in the biofilm. Kruskal-Wallis and Mann-Whitney U tests were used to compare results among groups, and two-way analysis of variance was used to evaluate the effects of grinding burs on final roughness (${\alpha}=.05$). RESULTS. The DP group had the highest final Ra value, followed by the DSP, NP, and NSP groups. Use of the stone grinding bur as a coarse-finishing step significantly decreased final Ra values when a diamond bur was used (P<.001). Omission of the stone grinding bur increased biofilm formation on specimen surfaces. Combining a stone grinding bur with silicone polishing burs produced the smallest final biofilm values, regardless of the use of a diamond bur in initial surface treatment. CONCLUSION. Coarse finishing of monolithic zirconia with a stone grinding bur significantly decreased final Ra values and bacterial biofilm formation when surfaces had been roughened by a diamond bur.

• Journal of Climate Change Research
• /
• v.7 no.2
• /
• pp.157-167
• /
• 2016

This study aims to evaluate the effect of shortened final cutting age by estimating future $CO_2$ absorption in each different scenarios based on each final cutting ages before and after shortening. We used $5^{th}$ Forest Type Map and Forest Yield Table to obtain information to estimate $CO_2$ absorption of forest. We also designed a simulated future scenarios from 2010 to 2100 which repeats cutting and reforestation according to respected each final cutting ages. As the result, number of cuttings and total amount of $CO_2$ absorption of forest were increased with shortened final ages. Total cutting times increased up to 2 in both minimum and maximum amount for Quescus spp. and Larix kaempferi. Maximum number of cutting of Pinus densiflora and minimum number of Pinus koraiensis increased by 1. Total $CO_2$ absorption increased 12％ for Quercus spp. which had the largest number of increase in cutting times, while total $CO_2$ absorption of Pinus koraiensis only increased by 1％. The result could be used to evaluate the changes in forest management plans and policies and then develop optimal final age for efficient sustainable forest management plans.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 1991.02a
• /
• pp.195-214
• /
• 1991

• Journal of Environmental Science International
• /
• v.13 no.1
• /
• pp.79-87
• /
• 2004

Esterification of soybean oil with methanol was investigated. First of all, liquid-liquid equilibriums for systems of soybean oil and methanol were measured at temperatures ranging from 40 to 65$^{\circ}C$. Profiles of conversion of soybean oil with time were determined from the glycerine content in reaction mixtures for the different kinds of catalysts, such as NaOH, CaO, Ca(OH)$_2$, MgO, Mg(OH)$_2$, and Ba(OH)$_2$. The effects of dose of catalyst, cosolvent and reaction temperature on final conversion were examined. Esterification of waste vegetable oil with methanol was investigated and compared to the case of soybean oil. Solubility of methanol in soybean oil was substantially greater than that of soybean oil in methanol. When the esterification reaction of soybean oil was catalyzed by solid catalyst, final conversion was strongly dependent on the alkalinity of the solid catalyst, and increased with the alkalinity of the metal. Hydroxides from the alkali metals were more effective than oxides. When Ca(OH)$_2$ was used for the esterification catalyst, maximum value of final conversion was measured at dose of 4％. When CHCl$_3$ as a cosolvent, was added into the reaction mixture of soybean oil which catalyzed by Ba(OH)$_2$, maximum value of final conversion was appeared at dose of 3％. When waste vegetable oil was catalyzed by NaOH and solid catalysts, high final conversion, over 90％, and fast reaction rate were obtained.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.06a
• /
• pp.49-54
• /
• 2006

During most of manufacturing processes of auto-body panels, the trimming line should be designed in advance prior to flanging. It is an important task to find a feasible trimming line to obtain a precise final part shape after flanging. This paper proposes a new fast method to find feasible trimming line based on one-step analysis. The basic idea of the one-step analysis is to seek for the nodal positions in the initial blank from the final part, and then the distribution of strain, stress and thickness in the final configuration can be calculated by comparing the nodal position in the initial blank sheet with the one of the final part. The one-step analysis method is able to predict the trimming line before flanging since the desired product shape after flanging can be defined from the final configuration and most of strain paths are simple during the flanging process. Finally, designers can obtain a discrete trimming line from the boundary of the developed meshes after one-step analysis and import it into CAD system in the early design stage. The proposed method has been successfully applied to two basic curve flanging processes demonstrating many advantages.

• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.408-420
• /
• 2010

It is important to forecast the final deformation of a tunnel during construction for evaluating its mechanical stability. In this study, the final deformation of a tunnel is forecasted by fitting tunnel deformations measured while excavating to a displacement function and exterpolating it. The tunnel for the study was built in two stages divided into an upper and a lower part. During the lower part construction of the tunnel, the displacement function forecasts the final incremental displacement well compared to the increment measured after completion of the tunnel. It is because the critical initial displacement occurred on passing the measurement pins can be adequately measured during excavating the lower part, which can not be measured during the upper part excavation of the tunnel.

• Cross-Cultural Studies
• /
• v.39
• /
• pp.433-460
• /
• 2015

This paper was analyzed the politeness and the expression of ending sentence in family conversations in the virtual language of cartoon characters. Younger speakers have a tendency to unite sentence-final particle to the polite form, older speakers have a tendency to unite it to the plain form in the historical genre. But younger speakers and older speakers unite sentence-final particle to the plain form in other fiction genres. Using terms of respect is determined by circumstances and charactonym. Comparing the translation of conversations with the original, there were the different aspects of translated works. When Japanese instructors are used to study Japanese as the instructional media, they give a supplementary explanation to students. 'WA' 'KASIRA' that a female speaker usually uses are used by a male speaker, 'ZO' 'ZE' that a male speaker usually uses are used by a female speaker in the virtual language of cartoons. In the field of the translation, it is translated 'KANA' 'KASIRA' into 'KA?', 'WA' 'ZO' 'ZE' into 'A(EO)?', 'WAYO' 'ZEYO' into AYO(EOYO)'. When we use sentence-final particle in the virtual language of cartoon, we need to supply supplementary explanations and further examinations.

• Journal of the Korean Ceramic Society
• /
• v.29 no.11
• /
• pp.843-850
• /
• 1992

The purpose of this study was to describe the heterogeneity effects on Intermediate/Final microstructure in isothermal liquid phase sintering. Several kinds of pore shapes were made by the different in the heterogeneity stress level during Intermediate/Final stage. Specimen with 48% green density especially showed that the local regions of a sintered compact were subject to more rapid shrinkage than the surroundings. This densification limiting factors generally inhibited sintering and made the large isolated crack-like pore in heterogeneous microstructures.