• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.582-590
• /
• 2010

Garment design needs an iterative manipulation of 2D patterns to generate a final sloper. Traditionally there have been two kinds of design methodologies such as the flat pattern method and the pattern draping method. But today, it is possible to combine the advantages from the two methods due to the realistic cloth simulation techniques. We devised a new garment design system which starts from 3D initial drape simulation result and then modifies the garment by editing the 2D flat patterns synchronously. With this interactive methodology using real-time pattern deformation technique, the designer can freely change a pattern shape by watching its 3D outlook in real-time. Also the final garment data were given relative coordinates with respect to the human anthropometric feature points detected by an automatic body feature detection algorithm. Using the relative human body coordinate system, the final garments can be re-used to an arbitrary body data without repositioning in the drape simulation. A female shirt was used for an example and a 3D body scan data was used for an illustration of the feature point detection algorithm.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.136-143
• /
• 2013

Recently, a novel coating method using an aqueous doapmine solution was proposed, the deposited coating was found to have extraordinarily strong-adhesion to numerous materials such as metal and polymers. However, it has suffered from many controversy in scientific fields due to its final structure and deposited mechanisms. Here, we have proposed a new structure for final dopamine product coupling with solid state spectroscopic, thermal behavior, and gas transport behaviors of dopamine coated microporous polyethersulfone membranes. In its final analysis, the results represented that it is a supramolecular aggregated of monomers consisting of 5,6-dihydroxyindoline and its derivative in contrast to previously proposed polymeric structure.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.5
• /
• pp.73-80
• /
• 2006

The mono-layer cover system is composed of soils only as a filling material and various plants are planted on the surface to control the water balance in the cover system. In this paper, the mono-layer cover system was considered as an alternative landfill final cover system and developed a model that could utilize industrial by-product (especially, coal ash & phosphogypsum) as additive filling materials. The mixture of granite soil, coal ash, and phosphogypsum was placed as a cover material in a box constructed with cement. Laboratory tests were carried out to investigate the environmental effect on the utilization of coal ash & phosphogypsum and to determine the mxing ratio of each materials. In the leaching test, all materials showed lower heavy metal concentration than the threshold values of regulation. The optimum mixing ratio of materials which was applied to field model test was determined to soil (4) : coal ash (1) : phosphogypsum (1) on the volume base. Field model tests were continued from February to July, 2004 in the soil box that was constructed with cement block. It was verified that coal ash and phospogypsum mixed with soil was to be safe environmentally and the water balance of mono-layer cover system was reasonable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.585-598
• /
• 2017

Sports climbing requires more maximum body motion range than any other sport. This study examined what element affects the actions of sports climbers and suggest an ideal pattern archetype to maximize function based on motion. The theoretical background included abstracted elements influencing clothing design by researching the body type of sports climbers and the motion of sports climbing. Along with the characteristic of climbing wear, this study also conducted a comparative analysis of sleeve patterns for sports climbing wear and general sports jackets, abstracting comparative parts that influence sports climbing wear design. To develop the final research archetype, research was done on 107 sports climbers in their 20s-30s that selected the top 3 brands and collected patterns as well. A research archetype was selected based on 3-D virtual clothing and developed into 4 different patterns with different sleeve cap heights. Appearance evaluation and a motion functionality evaluation were then conducted in order to select a final research archetype adequate for sports climbing based on evaluation findings. In addition, this study identified aesthetical problems of the final research archetype produced based on functionality that could suggest an archetype for a climbing jacket that could be visually satisfying through appearance evaluations and motion functionality evaluations.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.2
• /
• pp.148-158
• /
• 2013

Generally, building construction projects have a complex decision-making process because of the participation of various agents. In this situation, a final decision is arrived at by relying on subjective judgments based on the experience of project participants. For this reason, a method of assessing the objectivity of opinions is needed. In previous studies, the multi-criteria decision making method was applied to arrive at a final decision objectively, but this method has a limitation, in that the experience of each decision maker is not considered differently in the decision making process. Therefore, this study proposed a theoretical model using the S-shaped growth curve and regression analysis by building construction project type to quantitatively estimate decision-making reliability according to the experience of individual project participant`s. The developed model could be added to the Multi-criteria decision making method, and secure the objectivity and reliability of project participants' final opinion.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.3
• /
• pp.177-184
• /
• 2014

PURPOSE. The aim of this study was to measure the changes on the marginal and internal adaptation of zirconia based anterior fixed partial dentures after the porcelain firing process. MATERIALS AND METHODS. A total of 34 anterior fixed partial dentures using LAVA CAD/CAM system (3M ESPE, Germany) were applied. Two silicone replicas were obtained: one is obtained before porcelain firing process (initial) and the other is obtained after porcelain firing process (final), followed by the examination under a binocular stereomicroscope. Kruskal Wallis and Wilcoxon Signed Ranks tests were used for the statistical analysis (P<.05). RESULTS. No statistically significant difference was found between initial and final marginal gap values (P>.05). At the internal gap measurements, final marginal area values ($59.54{\mu}m$) were significantly lower than the initial marginal area values ($68.68{\mu}m$)(P<.05). The highest and the lowest internal gap values were observed at the incisal/occlusal area and at the marginal area, respectively. In addition, lower internal gap values were obtained for canines than for central incisors, lateral incisors and premolars at the incisal area (P<.05). CONCLUSION. The firing cycles did not affect the marginal gap of Lava CAD/CAM system, but it is controversial for the internal gap.

• Elastomers and Composites
• /
• v.33 no.2
• /
• pp.93-102
• /
• 1998

In electric cable industries, the curing extent of the rubber materials covering the electric cores gives an significant effect on their final performance. The curing extent of rubber is controlled mostly by pull-out velocity of cable in the extrusion process. The final curing extent may be different for different radial positions inside the rubber because of the non-uniform temperature distributions during the curing process. In this contribution, the prediction of curing extent distribution throughout the radial direction of rubber is represented when the cable is passing through the steam curing zone with a fixed pull-out velocity. The prediction of the optimum pull-out velocity for the desired curing extent distribution is also reported. The steady-state heat balance was developed for the curing and cooling processes in which the pull-out rubber was cured by high temperature steam and then cooled by ambient water. A few essential material properties such as density, specific heat, and thermal conductivity were measured to analyze the temperature distribution during the curing and cooling processes. The times to reach 90% curing extent at varying temperatures were measured and used to determine the final cure extent distribution inside the rubber.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.105-110
• /
• 1998

In the make-up product, Eye-shadow products have several purposes of enhancing product quality such as providing the beauty (variation of shape, clean appearance), feeling, continuity and adhesion. In this paper, newly developed wet type back injection press process is introduced so as to increase higher value products which providing various the beauty. The solvent takes an essential role to provide the fluidity of the powder bulk during the pressed-process of wet type pressed product. In this study, the effect of solvent in the oil binder was investigated, And the higher quality condition of the wet type pressed product was built to apply cosmetic preparation. Firstly, the system was designed powder phase as non treated pigment. The oil binder phase is categorized as hydrocarbons(Mineral oil, Squalane), Silicones(Methicone, Dimethicone ), esters (Octyldodecanol, Octyl Dodecyl Myristate). The solvent phase used was C 7-8 isoparaffin and Isopropyl Alcohol. The interaction of oil binder and solvent is investigated by measuring mass of final oil binder and the each solubility parameter. It was found that the higher the solubility the higher the degree of change in the final composition of the oil binder. In order to maintain the quality of the final product, the solvent used in pressed-process should be hydrophobic with oil binder.

• MALSORI
• /
• no.21_24
• /
• pp.90-110
• /
• 1992

The purpose of this thesis is to investigate the intonation features of the last two syllables of rhythmic units, with the exception of the sentence final unit, in the Seoul dialect of Korean. The Model 5500 Sona-graph was used to measure the pitch and duration of the target syllables. There are two classes of materials. One class was designed to determine the intonation of rhythmic units in a natural situation and the other to investigate the intonation of rhythmic units in an artificial situation, in which speakers were asked to read the materials pausing only at the marked boundaries, with a view to identifying the intonation of Seoul dialect more clearly. The findings of this investigation are as follows: (1) Korean averages an 11% rising intonation between the two syllables at the end of a rhythmic unit. (2) The rising rate between the final two syllables' pitch values at the subject rhythmic unit is generally higher than those at other units in a sentence and it seems to be meaningful syntactically. (3) Before a boundary the rhythmic units undergo 'pre-lowering', in which the pitch gradually lowers from the first syllable to the penultimate. (4) Every syllable in each rhythmic unit tends to lengthen when speakers read the materials with a pause between units and the tendency is most salient at the final syllable before a boundary.

• Journal of Korean Society on Water Environment
• /
• v.31 no.4
• /
• pp.418-427
• /
• 2015

This study was carried out to evaluate the performance of a lab-scale novel septic tank system for improving the conventional septic tank in the developing countries of water shortages. The lab-scale novel septic tank system consists of sepetic tank, aeration tank with HBC-ring, and sand filter. Optimum HRT was reguired about 1.5days to get a total COD removal efficiency of 90%, COD, BOD and SS removal efficiency was about 70%, 60%, and 85% in sepetic tank only. The structure of sepetic tank with two stages results in the high removal efficiency of organic matter. When sepetic tank, aeration tank, and sand filter were more than HRT 1.5days, 18hrs, and 12hrs, respectively, final effluent was less than 20 mg/L of BOD, 14 mg/L of SS, so that there is a high potential of its use for reusing water in flush toilet. There is no significant effect of HRT change on nutrient removal. Total nitrogen removal efficiency was about 40%, final effluent was 30~40 mg/L of TN, total phosphorus removal efficiency was about 11~25%, final effluent was 9~12 mg/L of TP. Because there is very small amounts of organic nitrogen and phosphorus in effluent, it was possible to reuse water for agricultural use.