• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.760-765
• /
• 2007

In this paper, the threshold voltage roll-off and drain induced barrier lowering(DIBL) have been analyzed for nano structure double gate FinFET. The analytical current model has been developed, including thermionic current and tunneling current models. The potential distribution by Poisson equation and carrier distribution by Maxwell-Boltzman statistics were used to calculate thermionic omission current, and WKB(Wentzel- Kramers-Brillouin) approximation to tunneling current. The threshold voltage roll-offs are obtained by simple adding two currents since two current is independent. The threshold voltage roll-off by this model are compared with those by two dimensional simulation and two values are good agreement. Since the tunneling current increases especially under channel length of 10nm, the threshold voltage roll-off and DIBL are very large. The channel and gate oxide thickness have to be fabricated as thin as possible to decrease this short channel effects, and this process has to be developed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.6
• /
• pp.1-7
• /
• 2004

We performed two-dimensional (20) computer-based modeling and simulation of FinFET by solving the coupled Poisson-Schrodinger equations quantum-mechanically in a self-consistent manner. The simulation results are carefully investigated for FinFET with gate length(Lg) varying from 10 to 80nm and with a Si-fin thickness($T_{fin}$) varying from 10 to 40nm. Current-voltage (I-V) characteristics are compared with the experimental data. Device optimization has been performed in order to suppress the short-channel effects (SCEs) including the sub-threshold swing, threshold voltage roll-off, drain induced barrier lowering (DIBL). The quantum-mechanical simulation is compared with the classical appmach in order to understand the influence of the electron confinement effect. Simulation results indicated that the FinFET is a promising structure to suppress the SCEs and the quantum-mechanical simulation is essential for applying nano-scale device structure.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.271-276
• /
• 2017

The triple-gate tunnel FETs encapsulated with an epitaxial layer (EL TFETs) is proposed to lower the subthreshold swing of the TFETs. Furthermore, the band-to-band tunneling based on the maximum electric-field can occur thanks to the epitaxial layer wrapping the Si fin. The performance and mechanism of the EL TFETs are compared with the previously proposed TFET based on simulation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.1-7
• /
• 2006

3-dimensional(3-D) simulations of ideal double-gate bulk FinFET were performed extensively and the electrical characteristics. were analyzed. In 3-D device simulation, we changed gate length($L_g$), height($H_g$), and channel doping concentration($N_b$) to see the behaviors of the threshold voltage($V_{th}$), DIBL(drain induced barrier lowering), and SS(subthreshold swing) with source/drain junction depth($X_{jSDE}$). When the $H_g$ is changed from 30 nm to 45nm, the variation gives a little change in $V_{th}$(less than 20 mV). The DIBL and SS were degraded rapidly as the $X_{jSDE}$ is deeper than $H_g$ at low fin body doping($1{\times}10^{16}cm^{-3}{\sim}1{\times}10^{17}cm^{-3}$). By adopting local doping at ${\sim}10nm$ under the $H_g$, the degradation could be suppressed significantly. The local doping also alleviated $V_{th}$ lowering by the shallower $X_{jSDE}\;than\;H_g$ at low fin body doping.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.135-141
• /
• 2014

In this paper, the device design guideline to reduce the threshold voltage variation with fin width in junctionless MuGFET has been suggested. It has been observed that the threshold voltage variation was increased with increase of fin width in junctionless MuGFETs. To reduce the threshold voltage variation with fin width in junctionless MuGFETs, 3-dimensional device simulation with different gate dielectric materials, silicon film thickness, and an optimized fin number has been performed. The simulation results showed that the threshold voltage variation can be reduced by the gate dielectric materials with a high dielectric constant such as $La_2O_3$ and the silicon film with ultra-thin thickness even though the fin width is increased. Particularly, the reduction of the threshold voltage variation and the subthreshold slope by reducing the fin width and increasing the fin numbers is known the optimized device design guideline in junctionless MuGFETs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.296-300
• /
• 2021

The performance of devices has been improved with fine processes from planar to three-dimensional transistors (e.g., FinFET, NWFET, and MBCFET). There are some problems such as a short channel effect or a self-heating effect occur due to the reduction of the gate-channel length by miniaturization. To solve these problems, we compare and analyze the electrical and thermal characteristics of FinFET and GAAFET devices that are currently used and expected to be further developed in the future. In addition, the optimal structure according to the Fin shape was investigated. GAAFET is a suitable device for use in a smaller scale process than the currently used, because it shows superior electrical and thermal resistance characteristics compared to FinFET. Since there are pros and cons in process difficulty and device characteristics depending on the channel formation structure of GAAFET, we expect a mass-production of fine processes over 5 nm through structural optimization is feasible.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.2
• /
• pp.61-67
• /
• 2006

We fabricate local damascene FinFET cell array in sub-60nm feature sized DRAM. The local damascene structure can remove passing-gate-effects in FinFET cell array. p+ boron in-situ doped polysilicon is chosen for the gate material, and we obtain a uniform distribution of threshold voltages at around 0.7V. Sub-threshold swing of 75mV/d and extrapolated off-state leakage current of 0.03fA are obtained, which are much suppressed values against those of recessed channel array transistors. We also obtain a few times higher on-state current. Based on the improved on- and off-state current characteristics, we expect that the FinFET cell array could be a new mainstream structure in sub-60nm DRAM devices, satisfying high density, low power, and high-speed device requirements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.329-329
• /
• 2012

Mobile 기기로 둘러싸여있는 현대의 환경에서 Flash memory에 대한 중요성은 날로 더해가고 있다. Flash memory의 가격 경쟁력 강화와 사용되는 기기의 소형화를 위해 flash memory의 비례축소가 중요한 문제로 부각되고 있다. 그러나 다결정 실리콘을 플로팅 게이트로 이용하는planar flash memory 소자의 경우 비례 축소 시 short channel effect 와 leakage current, subthreshold swing의 증가로 인한 성능저하와 같은 문제들로 인해 한계에 다다르고 있다. 이를 해결하기 위해 CTF 메모리 소자, nanowire FET, FinFET과 같은 새로운 구조를 가지는 메모리소자에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 22 nm 게이트 크기의 FinFET 구조를 가지는 플래시 메모리소자에서 fin의 두께와 높이의 변화에 따른 메모리 소자의 전기적 특성을 3-dimensional 구조에서 technology computer aided design ( TCAD ) tool을 이용하여 시뮬레이션 하였다. 본 연구에서는 3D FinFET 구조를 가진 플래시 메모리에 대한 시뮬레이션 하였다. FinFET 구조에서 채널영역은 planar 구조와 다르게 표면층이 multi-orientation을 가지므로 본 계산에서는 multi-orientation Lombardi mobility model을 이용하여 계산하였다. 계산에 사용된 FinFET flash memory 구조는 substrate의 도핑농도는 $1{\times}10^{18}$로 하였으며 source, drain, gate의 도핑농도는 $1{\times}10^{20}$으로 설정하여 계산하였다. Fin 높이는 28 nm로 고정한 상태에서 fin의 두께는 12 nm부터 28nm까지 6단계로 나누어서 각 구조에 대한 프로그램 특성과 전기적 특성을 관찰 하였다. 계산결과 FinFET 구조의 fin 두께가 두꺼워 질수록 채널형성이 늦어져 threshold voltage 값이 커지게 되고 subthreshold swing 값 또한 증가하여 전기적 특성이 나빠짐을 확인하였다. 각 구조에서의 전기장과 전기적 위치에너지의 분포가 fin의 두께에 따라 달라지므로써 이로 인해 프로그램 특성과 전기적 특성이 변화함을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.160-164
• /
• 2010

The radio frequency (RF) model of SOI FinFETs with gate length of 40 nm is verified by using a 3-dimensional (3-D) device simulator. This paper shows the equivalent circuit model which can be used in the circuit analysis simulator. The RMS modeling error of Y-parameter was calculated to be only 0.3 %.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.10-16
• /
• 2016

In this paper, a design for a fully digital voltage sensor using a 32-nm fin-type field-effect transistor (FinFET) is presented. A new characteristic of the double gate p-type FinFET (p-FinFET) is examined and proven appropriate for sensing voltage variations. On the basis of this characteristic, a novel technique for designing low-power voltage-to-time converters is presented. Then, we develop a digital voltage sensor with a voltage range of 0.7 to 1.1V at a 50-mV resolution. The performance of the proposed sensor is evaluated under a range of voltages and process variations using Simulation Program with Integrated Circuit Emphasis (SPICE) simulations, and the sensor is proven capable of operating under ultra-low power consumption, high linearity, and fairly high-frequency conditions (i.e., 100 MHz).