• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06b
• /
• pp.18-21
• /
• 1996

In the field of Virtual Reality, many studies have been reported. Especially, there are many studies on generating virtual creatures on computer systems. In this paper we propose an algorithm to automatically generate 3D fish models from 2D images which are printed in illustrated books, pictures or handwritings. At first, 2D fish images are captured by means of image scanner. Next, the fish image is separated from background and segmented to several parts such as body, anal fin, dorsal fin, ectoral fin and ventral fin using the proposed method“Active Balloon model”. After that, users choose front view model and top view model among six samples, respectively. 3D model is automatically generated from separated body, fins and the above two view models. The number of patches is decreased without any influence on the accuracy of the generated 3D model to reduce the time cost when texture mapping is applied. Finally, we can get any kinds of 3D fish models.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.2
• /
• pp.102-107
• /
• 1996

It is difficult to analyze the high speed rolling missile with the generally used missile body fixed coordinates. In this study, we formulate the dynamic equations of the high speed rolling missile with the principal axis of inertia, and make the analytical model of one axis steering missile using pitch/yaw symmetry and complex summation method. With this model we analyze the control characteristics and propose the design considerations of high speed rolling missile with one axis control fin using PNG law in conjuntion with a seeker signal.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.10 s.241
• /
• pp.1139-1147
• /
• 2005

The shape optimal design of the plate-fin type heat sink with vortex generator is performed to minimize the pressure loss subjected to the desired maximum temperature numerically. Evaluation of the performance function, in general, is required much computational cost in fluid/thermal systems. Thus, global approximate optimization techniques have been introduced into the optimization of fluid/thermal systems. In this study, Kriging method Is used to obtain the optimal solutions associated with the computational fluid dynamics (CFD). The results show that when the temperature .rise is less than 40 K, the optimal design variables are $B_1=2.44\;mm,\;B_2=2.09\;mm$, and t=7.58 mm. Kriging method can dramatically reduce computational time by 1/6 times compared to SQP method so that the efficiency of Kriging method can be validated.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.75
• /
• pp.137-158
• /
• 2017

Traditional banking systems of transactions are being replaced by FfinTech. Block Chain System can be a key point in Fourth Industrial Revolution such as AI, Big Data, IOT and also can be used as a tools of smart contract or smart payment systems in International Trade. If banking regulation is to be liberalized FinTech would be more activated in Korea and various attempts would be available especially smart payment in business. There are so many levels to be achieved from the time of contract to the time of clearance. We cannot expect speed and range of IT advancement and international trade, Block Chain system will challenge the traditional banking process. First, Block Chain Payment system can be used in P2P, B2B transaction and also T/T in small business. Second, Bit Coin transaction can be available within the parties without the Trusted Third Party. Third, By using of Block Chain system Traditional International Trade process can be altered.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.3
• /
• pp.180-188
• /
• 2021

This paper conducted a study on the ortho-para hydrogen conversion in the cryogenic heat exchanger filled with catalysts for hydrogen liquefaction by utilizing the numerical model of plate-fin heat exchanger considering catalytic reaction of ortho-para hydrogen conversion, heat and mass transfer phenomena and fluid dynamics in a porous medium. Various numerical analyzes were performed to investigate the characteristics of ortho-para hydrogen conversion, the effects of space velocity and activated catalyst performance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.3
• /
• pp.292-299
• /
• 1997

Ammonia has been used as refrigerant for more than 100 years in absorption as well as in compression systems. Due to its poisonous and inflammable properties, however, its use has been mainly on heavy industrial plants in which regular maintenance are available. For these systems, condensers are generally water-cooled. This is suitable for large systems over 20 RT but is not suitable for small systems. In order to apply ammonia for a small system, it is important to adopt an air-cooled condenser. In this study, simple numerical analysis of an air-cooled condenser for an ammonia refrigeration system has been carried out. The condenser is designed as horizontal tubes with plate fins attached at the outer surface to enhance the air-side heat transfer rate. Effects of fin shape and arrangement are studied in detail. Since the local heat transfer coefficient is highest at the leading edge, heat flux is highest at the edge and decreases along the distance. Conditions of inlet air are also varied in the study and condenser length that is required for full condensation is calculated. The results show that it is important to enhance both the air-side and internal heat transfer coefficients.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.104-112
• /
• 1998

Ammonia has been used as refrigerant for more than 100 years in absorption as well as in compression systems. Due to its poisonous and inflammable properties, however, its use has been mainly on heavy industrial plants in which regular maintenance is available. For these systems, condensers are generally water∼cooled. This is suitable for large systems over 20RT but is not suitable for small systems. In order to apply ammonia for a small system, it is important to adopt an air-cooled condenser. In this study, simple numerical analysis of an air-cooled condenser for an ammonia refrigeration system has been carried out. The condenser is designed as horizontal tubes with plate fins attached at the outer surface to enhance the air-side heat transfer rate. Effect of fin shape and arrangement are studied in detail. Since the local heat transfer coefficient is highest at the leading edge, heat flux is highest at the edge and decreases along the distance. Conditions of inlet air are also varied in the study and condenser length that is required for full condensation is calculated. The results show that it is important to enhance both the air-side and internal heat transfer coefficients.

• Korean Journal of Ichthyology
• /
• v.35 no.2
• /
• pp.121-128
• /
• 2023

Two specimens of Polymetme elongata (Phosichthyidae; Polymetme) were collected by a bottom trawl from both the southern coastal waters of Jejudo Island in October 2016 (70.65 mm SL) and Yellow Sea, Korea in August 2022 (54.04 mm SL). They are an elongated body with large mouth, 11 dorsal fin rays, 10 pectoral fin rays, 7 pelvic fin rays, 30~32 anal fin rays, 1 adipose fin, 18 gill rakers, 44 vertebrae, 1 preorbital photophore, 1~2 ventrolateral rows of photophores on body, 1 paired photophores in symphysis of lower jaw, 9 branchiostegal rays, 2 rows of 8 phorophores between pelvic fin origin and anal fin origin, and 1 row of 23 photophores thereafter. At the origin of anal fin, the second photophore is more higher than third photophore and the first photophore is most lowest. Our specimens differ from the other species of the same genus by the ratio of the head length to the standard length (1/5) and the gill rakers (18), absolutely. As this species is the first record of the family Phosichthyidae, genus Polymetme, and P. elongata in Korean waters, we suggest their new Korean names, "Gin-ael-tung-i-gwa", "Gin-ael-tung-i-sog", and "Gin-ael-tung-i", respectively.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1801-1811
• /
• 2003

An experimental study was conducted to investigate the effects of air-side fouling and cleaning on the performances of various condenser coils used in unitary air-conditioning systems. A total of six condenser coils with different fin geometry and row number were tested. Performance tests were performed at three different conditions: clean-as-received, after fouling, and after cleaning. In all cases, it was observed that the fouling was mostly confined to the frontal face of the heat exchanger as reported in the previous investigations. The amount of deposited dust was more dependent on fin geometry for the single-row heat exchangers than for the double-row heat exchangers. The predominant effect of fouling was to cause a more significant increase in air-side pressure drop than a degradation in heat transfer performance. For the single-row heat exchangers, the pressure drop increased by 28 to 31%, while the heat transfer performance decreased by 7 to 12% at the standard air face velocity of 1.53 m/s depending on fin shape. For the double-row heat exchangers, the pressure drop increased by 22 to 37%, and heat transfer performance decreased by only 4-5% at the same air face velocity. Once the contaminated coils were cleaned according to the given cleaning procedure the original performance of the heat exchangers could almost be recovered completely. The pressure drop could be restored within 1 to 7% and the heat transfer performance could be recovered to within 1 to 5% of the originally clean heat exchangers. Therefore, it is concluded that a periodic application of the specified cleaning technique will be effective in maintaining the thermal performance of the condenser coils.

• Information Systems Review
• /
• v.22 no.3
• /
• pp.59-80
• /
• 2020

Excellent FinTech firms create value by finding customer needs or addressing customer problems to provide customers with differentiated solutions through information technologies and organizational innovation capability. Accordingly, the survival and growth of FinTech firms rely on the innovation performance for solving customer problems. This study assumes that IT relatedness and entrepreneurial culture play a mediating role in the relationship between service orientation and innovation performance. To examine it, designed and demonstrated is a structural model from the perspective of dynamic organizational capability. The results show that IT relatedness and entrepreneurial culture play a mediating role between service orientation and innovation performance. Although IT relatedness and entrepreneurial culture were partial mediators in each divided model, the integration model showed there was no direct effect of service orientation on innovation performance. The practical implication is that FinTech companies need to understand customer problems accurately, set up appropriate service goals and align all strategies to achieve them. With these strategic alignments, higher innovation performance can be achieved by enabling IT resources and capabilities to be actively utilized in all functions of the organization and institutionalizing the entrepreneurial culture.