• Journal of the Korea Society of Computer and Information
• /
• v.10 no.3 s.35
• /
• pp.201-208
• /
• 2005

Event notification service is a event-based messaging middleware service needed for various vertical domains, such as, business applications, distributed system management, and web service integration. In this paper, we investigate the architecture of an event notification service that includes a subject-based event dissemination service and a flexible message communication service. The event dissemination service is in charge of transferring events asynchronously but speedy according to the subjects of events and their environmental knowledge. It also includes content-based message filtering. The message communication service provides a common communication infrastructure supporting variety types of messages and variety of protocols. Depending on application domains and situation, we can re-configurate the communication infrastructure in order to optimize the efficiency and usability. This paper shows the performance analysis of our event notification service with various types of message formats and protocols.

• KSBB Journal
• /
• v.21 no.1 s.96
• /
• pp.28-33
• /
• 2006

A sewage was treated using a horizontal flow zeolite-filled reed bed. The sewage from the student dormitory of Changwon National University was fed into the reed bed for 10 minutes every 6 hours at the hydraulic load of $314L/m^2$ day. The filtering height of the reed bed was 100 cm and the zeolite mixture was filled in the reed bed. The mixture consisted of the same volume of two types of zeolite : $0.5{\sim}1mm$ and $1{\sim}3mm$ in diameter. Annual average removal efficiency was SS $88.5%,\;COD_{cr},\;86.1%,\;COD_{Mn}\;81.0%,\;T-N\;48.6%,\;NH_4^+-N\;97.1%$ and T-P 42.8%. T-N of effluent was mostly $NO_3^--N$ and the concentration of $NO_2^--N$ in effluent was lower than 0.1 mg/L. All removal efficiencies did not show a remarkable seasonal change.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2313-2321
• /
• 2014

A concentration meter is widely used at purification plants, sewage treatment plants and waste water treatment plants to sort and transfer high concentration sludge and to control the amount of chemical input. This study has been prepared for improving efficiency of operation on sludge processes and to establish a basic for factory automation by accuracy improvement and problem solution of sludge concentration meter. The concentration meter's accuracy and stability is improved by applying multi-beam sensors and minimum deviation linear average filtering. Furthermore maintenance without cut-off of water in sludge operation is possible by detachable sensors. The performance of multi-beam concentration meter has been variously verified by the pilot plant experiment.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.58-67
• /
• 2009

The annual requirement of domestic waste photoresist stripper solution is about 1 trillion won level (50,000 tons) depends entirely on imports for its supplies. Nevertheless, there waste strippers which contain the impurities have been recycled or incinerated to a low level of recycle. These days the recycling technologies of the waste stripper solution has been widely studied from the view points of economy and efficiency. In this paper, the recycling technologies on patent of the waste stripper solution were analyzed. The range of search was limited within the open patents of USA (US), European Union (EP), Japan (JP), and Korea (KR) up to september, 2007. Patents have been collected using key-words searching and filtered by filtering criteria. The trends of the patents was analyzed by the years, countries, companies, and technologies.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.03a
• /
• pp.163-181
• /
• 1997

This dissertation provides a theroetic study on the network security in general , the firewall in particular . In fact, the firewall has been recognized as a very promising option to obtain the security in the real world network environment . The dissertation provides a thorough theoretic investigation on the various problems raised in the computer network, and also explores a methodology of the security against IP spoofing. Moreover, it investigates a systematic procedure to make analysis plans of the firewall configuration. Based on the above investigation and analysis , this dissertation provides two approaches to network security, which address a number of issues both at the network and at application level. At the network level. a new methdo is proposed which uses packet filtering based on the analysis of the counter plot about the screen router. On the other hand at the application level, a novel method is exlored which employs security software , Firewall-1, on Bastion host. To demonstrate the feasibility and the effectiveness of the proposed methodologes, a prototype implementation is made. The experiment result shows that the screen router employing the proposesed anti-IP spoofing method at the network level is effective enough for the system to remain secure without being invaded by any illegarl packets entering from external hackers. Meanwhile , at the application level. the proposed software approach employing Firewall -1 is proved to be robust enough to provent hackings from the outer point to point protocol connection. Theoretically, it is not possible to provide complete secuirty to the network system, because the network security involove a number of issues raised from low level network equipments form high level network protocol. The result in this dissertation provides a very promising solution to network security due to its high efficiency of the implementation and superb protectiveness from a variety of hacking.

• Journal of Korea Society of Industrial Information Systems
• /
• v.2 no.1
• /
• pp.103-123
• /
• 1997

This dissertation provides a theoretic study on the network security in general , the firewall in particular. In fact the firewall has been recognized as a very promising option to obtain the security inthe real work network environment . The dissertation provides a throuth theoretic investigation on the various problems raised in the computer network, and also explores a methodology of the security against IP spoofing. Moreover, it investigates a systematic procddure to make analysis and plans of the firewall configuration . Based on the above investigation and analysis, this dissertation provides two approaches to network security , which address anumber of issuesboth at the network and at applicatino level. At the network level, a new method is proposed which uses packet filtering based on the analysis of the counter plot about the screen router.On the other hand, at the application level, a novel method is explored which employs secureity software. Firewall-1 , on Bastion host. To demonstrate the feasibililty and the effectiveness of the proposed methodologties , a prototype implementation is made The experiment result shows that the screen router employing the proposed anti-IP spoofing method at the network level is effective enough for the system to remain secure without being invaded by any illegal packets entering form external hackers. Meanwhile , at the application level, the proposed software approach employing Firewall-1 is proved to be robust enugh to prevent hackings from the outer point the point protocal connnection . Theoretically, it is not possible to provide complete security to the network system, because the network security involve a number of issues raised form low level network equipments form high level network protocol. The result inthis dissertation provides a very promising solution to network security due to its high efficiency of the implementation and superb protectiveness from a variety of hacking.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.5
• /
• pp.711-719
• /
• 1996

Fermentation characteristics of kwahaju (a typical Korean traditional alcoholic beverage) base were investigated during fermentation with different contents of nuruk (Korean-style bran koji) extract. The nuruk extract which was prepared by incubating the mixture of nuruk powder and water at $25^{\circ}C$ overnight and by filtering it was used to be 0.6%, 2.7%, 5% and 10% (v/v). Total and reducing sugar contents as well as acidity of the kwahaju base with 0.6% nuruk extract were higher than those with 2.7%, 5% and 10% at the fermentation end. Final pH values of all the base samples were ranged from 3.3 to 4.1. Alcohol concentrations of the base samples with 2.7%, 5% and 10% nuruk extract were higher than those with 0.6%. Microbial growth rate was great and inner temperature was high in the sample with high content of nuruk extract, but fermentation period was short. Total sugar consumption and alcohol production increased as the content of nuruk extract increased, but total acid production decreased. The base sample with 10% nuruk extract showed the most excellent fermentation efficiency. Fusel oil content of the base sample with 2.7% nuruk extract was the highest (457.3 ppm), and those wity 5% and 10% nuruk extract were 438.9 ppm and 442.6 ppm, respectively. The sample with 0.6% nuruk extract had the lowest content (409.5 ppm). Sensory evaluation of both the kwahaju base and kwahaju mix with 25% and 40% alcohol by adding soju (Korean distilled liquor) showed that the base with 2.7% nuruk extract had the highest score, and that the kwahaju mix with 25% alcohol had higher score than that with 40%. The sensory results on overall desirability were consistent to those on color and alcohol concentration, and it turned out that the two factors were important to make kwahaju.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.82-92
• /
• 2012

There are several kinds of tungsten carbide(WC) such as light bulbs, metal cutting tools, drill bits, mining tools, military ordinance, high speed tool steels, chemicals/catalysts, wear resistance parts, jet engine turbine blades, etc.. These days it has been widely studied for the recycling technologies of the used tungsten carbide(WC) from view points of economy and efficiency. In this paper, open/registered patents of US, JP, EP, and KR and SCI Journal related to recycling technologies of the used Tungsten Carbide(WC) between 1969-2011 were reviewed. Patents and papers were collected using key-words searching and filtered by filtering criteria. The trends of the patents and papers was analyzed by the years, countries, companies, and technologies.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.177-185
• /
• 2018

There is a need to study dust separator screens with good drainage efficiency while effectively filtering suspended solids and other contaminants entering the intake pumping station, the drainage pumping station and the mediation pumping station, the cooling water inlet of the power plant, and the like. In this paper, Numerical studies were conducted for the optimal design of the dust separator screen using the Coanda effect. The shape of the dust separator screen is important, such as the right curvature radius $R_1$ at the top of the dust separator screen and the left curvature radius $R_2$ at the top, h is the height difference and shape between the screen and the accelerating plate, and ${\theta}$ is the inclination angle of the screen. A total of 4 shape factors were set and the effects of Coanda and drainage performance of each element were compared and analyzed, the optimum length and size of each shape element were derived by classifying the shape elements into direct and indirect influences. Finally, it was possible to effectively filter foreign matter by narrowing the screen spacing, and the drainage performance was analyzed and optimized through numerical studies of dust separator screen.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.8
• /
• pp.23-34
• /
• 2019

The façade, a fundamental function as a skin that protects human life from external environment such as cold and hot weather, snow, rain, and wind, etc, has served as a media for communication between indoor space of the building and outside space. From the media for communication point of view, the approach to envelope design, in which environmental elements are transmitted internally through the filtering of external environments, has been evolving in various ways from the past to the present. Today, modern architecture technologies including curtain wall systems and user-friendly computer programming and environmental analysis programs demonstrate a differentiated approach to envelope design related to the indoor environment. For this reason, it is worth noting that the envelope design factors and trends that appear variously in the UNStudio's projects before and after the 2000s. The factors reflected in the envelop design in conjunction with the indoor environment obtained through the case study of the UNStudio's office projects were daylight environment, thermal environment, ventilation, noise, privacy and view, and consideration for daylight environment and thermal environment was reflected in many cases through the case study. Looking at the changes in the diagrams in order of year, it can be seen that the envelope design using the environmental analysis tool has been performed since 2006. This is a clue to show the envelop design changes from the conceptual method to the data-based one. The diagrams and analysis results related to the envelop design showed that the thermal environment related to solar radiation was the most, and no diagrams and analysis related to the indoor illumination were found. Since 2010, PV panel installation has been shown in the envelope design, which can be found in the increased efficiency of PV panels due to the technological advances and the decrease in production cost.