• 제목/요약/키워드: Filter trap

검색결과 57건 처리시간 0.025초

담배 Mainstream Smoke중 Semi-volatile 화합물 연구 (Study of the Semi-volatile Components in Cigarette Mainstream Smoke)

  • 김정열;신창호;김종열;김영호;이근회
    • 한국연초학회지
    • /
    • 제20권1호
    • /
    • pp.115-123
    • /
    • 1998
  • The semi-volatile fraction of cigarette mainstream smoke contains the most important aroma and taste that enhance smoke flavor. The components in mainstream smoke were analysed for commercially available cigarettes. To compare the semi-volatile components delivered from mainstream smoke of domestic cigarette with imported cigarette, we analyzed three types of filter cigarettes such as cellulose acetate mono filter, carbon dual filter and slim filter cigarette. Mainstream smoke was collected with a combination of Cambridge filter pad and liquid trap containing a small amount of acetone cooled by dry ice-methanol. We have identified 43 components from mainstream smoke by GC and GC/MS and found that benzene, toluene, 4-hydroxy-4-methyl-2-pentanone, 5-methyl-2-furaldehyde, acetic acids nicotine and triacetin were the main peaks in mainstream smoke. Also we have compared the relative amounts of semi-volatile compounds delivered from the domestic and imported cigarettes with three different filters. From the results of this study, the relative amounts of limonene, acetic acid, 5-methyl-Lfuraldehyde delivered from the imported cigarettes were generally higher than those of the domestic one's.

  • PDF

금속폼을 이용한 Partial DPF의 설계 및 전산유체해석 연구 (Study of Design & CFD Analysis for Partial DPF Utilizing Metal Foam)

  • 윤천석;조규백
    • 한국자동차공학회논문집
    • /
    • 제17권1호
    • /
    • pp.24-34
    • /
    • 2009
  • DPF(Diesel Particulate Filter)s have been used to reduce the most of PM(particulate matters) from the exhaust emissions of diesel engine vehicles. Metal foam is one of promising materials for the DPFs due to its cost effectiveness, good thermal conductivity and high mechanical strength. It can be fabricated with various pore sizes and struct thickness and coated with catalytic wash-coats with low cost. In order to design metal foam filter and analyze the flow phenomena, pressure drop and filtration experiment are carried out. Partial DPF which has PM reduction efficiency of more than 50 % is designed in this paper. Also, CFD analysis are performed for different configurations of clean filters in terms of pressure drop, uniformity index, and velocity magnitude at face of filter. Filter thickness and the gap between front and rear filters are optimized and recommended for manufacturing purpose.

디젤입자상물질 여과장치의 배기저감성능 효과 분석 (An Investigation of the Effect of Diesel Particulate Filter for Heavy-duty Diesel Engine on Emission Reduction)

  • 박용희;신대윤
    • 한국환경보건학회지
    • /
    • 제33권1호
    • /
    • pp.36-42
    • /
    • 2007
  • Diesel PM can be controlled using Diesel Particulate Filter, which can effectively reduce the level of soot emissions to ambient background levels. In the Heavy Duty Diesel area, the Continuously Regeneration trap has been widely applied in the retrofit market. As the Special act for the improvement of air quality in the capital area, the retrofit program for DPF to used diesel vehicle has progressed favorably and there are currently over 1,000 of these DPF in use in retrofit applications in korea. These DPF comprise a specially formulated Diesel Oxidation Catalyst upstream of a DPF. The $NO_2$ generated by the DOC is used to combust the carbon collected in the DPF at low temperature. To certificate DPF device that is suitable to domestic circumstances, it is necessary to evaluate exactly the DPF devices according to the regulation of DPF certificate test procedure for retrofit(ministry of environment(MOE) announcement NO. 2005-16). To do so the understand of that regulation like the standard of PM reduction rate is needed. In this study the test procedure including test cycle and BPT test condition was examined and also the test result for specific DPF was analyzed. In every test like field test, PM reduction efficiency test and seoul-10 mode test, no defect could be showed.

Brookhaven 醫學硏究用 原子爐에서의 氣體噴出物에 관한 硏究 (A Study on Gaseous Effluents from BMRR)

  • 황선태;박태순;하석호;최성숙
    • 한국대기환경학회지
    • /
    • 제4권2호
    • /
    • pp.1-10
    • /
    • 1988
  • Brookhaven 의학연구용 원자로에서 방출되는 기체분출물에 관하여 연구 되었다. 모든 기체시료는 $\gamma$-선 분광계측에 의하여 분석되었다. 시료 중에 존재하는 것으로 확인된 핵종으로서, $^{82}Cl(T_{1/2}$ = 35.30 시간) 이 가장 뚜렷하였다. 그 외의 확인된 핵종은 $^{38}Cl(T_{1/2}$ = 37.24분), $^{41}Ar(T_{1/2}$ = 1.82시간), $^{106}Rh(T_{1/2}$ = 29.80묘), $^{133}Te(T_{1/2}$ = 12.45분)이었다. 3MW 원자로 출력에서 pre-filter bank를 통과한 기체분출물 중에서 $$^{41}Ar$의 농도는 2.436Bq/cc로 계산됨으로써 $^{41}Ar$의 방사능 방출율은 8.51 ${\times}10^9$Bq/MW - h로 산정되었다. filter bank의 방사능 원거효율(%)은 $^{38}Cl$의 경우 97.84%, $^{41}Ar$은 14.15%, ^{82}Br$은 98.70% 그리고 $^{106}Rh$은 98.81% 각각 산정되었다. 한편, charcoal trap과 millipore filter 에서 확인된 기타 핵종들로서 $^{24}Na$, $^{72}Ga$, $^{92}Sr$, $^{97}Zr$, $^{132}I$, $^{133}Te$, $^{141}Ce$, $^{153}Sm$$^{154}Pm$은 filter bank에 의해서 완전히 제거되었다.

  • PDF

용매 포집장치가 연기 중 Carbonyl 화합물의 분석에 미치는 영향 (The Effect of Solvent Trap Apparatus on the Analysis of Carbonyl Compounds in Cigarette Smoke)

  • 김효근;이존태;윤오섭;이문수
    • 한국연초학회지
    • /
    • 제25권2호
    • /
    • pp.137-143
    • /
    • 2003
  • Among the most popular means of mainstream smoke collection for specific analysis are solvent traps. Determination of the carbonyl compounds as their 2,4-dinitrophenylhydrazones(DNPHs) by HPLC offers increased sensitivity and reproducibility in the analysis of mainstream cigarette smoke. In this work, the mainstream smoke of a reference cigarette(lR4F) was collected in four kinds of gas washing bottles and their effects on the analysis of carbonyl compounds were investigated. The results show that the porosity of fritted glass filter in gas washing bottles exerted profound effect on the composition of the carbonyl compounds in mainstream smoke.

CR-DPF와 Cooled-EGR 적용한 디젤기관 성능해석 (A Performance Prediction of Diesel Engine with a CR-DPF and Cooled-EGR)

  • 문병철;오용석;박귀열;강금원;이태영
    • 한국공작기계학회논문집
    • /
    • 제14권6호
    • /
    • pp.95-100
    • /
    • 2005
  • Since air pollution has become a globally critical issue and exhaust emissions from automobiles cause a major source of air pollution, many countries including advanced countries have stipulated stringent emission regulations. This research focused on engine performance characteristics with the application of a continuous regeneration diesel particulate filter and EGR together in a heavy duty vehicle, and gives some suggestions on the direction of designing points of view by comparing the experimental data with numerical results which were obtained through KIVA-3V.

자연재생방식 DPF시스템 부착 경유승용차량의 PM재생 특성 연구 (A Study on PM Regeneration Characteristics of Diesel Passenger Vehicle with Passive Regeneration DPF System)

  • 이진욱;조규백;김홍석;정용일
    • 대한기계학회논문집B
    • /
    • 제31권2호
    • /
    • pp.188-194
    • /
    • 2007
  • New diesel engines equipped with common-rail injection systems and advanced engine management control allow drastic decreases in the production of particulate matters and nitrogen oxides with a significant advantage in terms of the fuel consumption and $CO_2$ emissions. Nevertheless, the contribution of exhaust gas after treatment in the ultra low emission vehicles conception has become unavoidable today. Recently the passive type DPF(Diesel Particulate Filter Trap) system for diesel passenger vehicle has been manufactured into mass production from a French automotive maker since the year of 2000. This passive DPF system fully relies on the catalytic effects from additives blended into the diesel fuel and additives injected into the DPF system. In this study, the effects of PM regeneration in the commercial diesel passenger vehicle with the passive type DPF system were investigated in chassis dynamometer CVS(constant volume sampler)-75 mode. As shown in this experimental results, the DPF regeneration was observed at temperature as low as $350^{\circ}C$. And the engine-controlled the DPF regeneration founded to be one of the most promising regeneration technologies. Moreover, the durability of this DPF system was evaluated with a season weather in terms of the differential pressure and exhaust gas temperature traces from a road test during the total mileage of 80,000km.

TV용 탄성표면파 필터의 개발 I-설계방법의 비교 및 제작방법 (Development of TV-IF SAW Filter I-Comparison of the Design Methods and Fabrication)

  • 김진하;남정현
    • 대한전자공학회논문지
    • /
    • 제21권5호
    • /
    • pp.17-26
    • /
    • 1984
  • 본 논문은 탄성표면파를 이용한 소형 TV중간주파 필터의 설계 및 제작과정을 보고한다. 초기의 원하는 임펄스응답을 얻기 위해 윈도우잉 (windowing) 방법 및 주파수 샘플링 방법이 제안되어 시간축샘플링 방법과 비교 연구되었으며, 트랩부근에서 원하는 특성을 얻기 위해 회절영향이 보상되었다. 다중 반사를 줄이고 비대칭 특성을 얻기 위해 4f0샘플링 기법을 사용하였으며, 효과적인 사진부식 방법을 사용하여 11.2㎛의 폭을 갖는 양호한 핑거가 얻어겼다. 본 연구는 SAW 필터의 국산화라는 차원에서. 요구하는 사양을 만족시킬 수 있고, 양산성이 있는 크기를 가진 제품을 개발하였음을 보고한다.

  • PDF

Analysis of Sediment Reduction with VFS and Diversion Channel with Enhancements in SWAT Landuse-Subbasin Overland Flow and VFS Modules

  • Park, Youn-Shik;Kim, Jong-Gun;Kim, Nam-Won;Engel, Bernie;Lim, Kyoung-Jae
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.752-757
    • /
    • 2009
  • In the last decade, many methods such as greet chamber, reservoir, or debris barrier, have been utilized to manage and prevent muddy water problem. The Vegetative Filter Strip (VFS) has been thought to be one of the most effective methods to trap sediment effectively. The VFS are usually installed at the edge of agricultural areas adjacent to stream or drainage ditches, and it has been shown that the VFS effectively removes pollutants transported with upland runoff. But, if the VFS is installed without any scientific analysis of rainfall-runoff characteristics, soil erosion, and sediment analysis, it may not reduce the sediment as much as expected. Although Soil and Water Assessment Tool (SWAT) model has been used worldwide for many hydrologic and Non-Point Source Pollution (NPSP) analysis at a watershed scale. but it has many limitations in simulating the VFS. Because it considers only 'filter strip width' when the model estimates sediment trapping efficiency, and does not consider the routing of sediment with overland flow option which is expected to maximize the sediment trapping efficiency from upper agricultural subbasin to lower spatially-explicit filter strip. Therefore, the SWAT overland flow option between landuse-subbasins with sediment routing capability was enhanced with modifications in SWAT watershed configuration and SWAT engine. The enhanced SWAT can simulate the sediment trapping efficiency of the VFS in the similar way as the desktop VFSMOD-w system does. Also it now can simulate the effects of overland flow from upper subbasin to reflect the increased runoff volume at the receiving subbasin, which is what is occurring at the field if no diversion channel is installed. In this study, the enhanced SWAT model was applied to small watershed located at Jaun-ri in South Korea to simulate diversion channel and spatially-explicit VFS. It was found that approximately sediment can be reduced by 31%, 65%, 68%, with diversion channel, the VFS, and the VFS with diversion channel, respectively.

  • PDF

3L급 디젤엔진의 배압이용 DPF 매연포집량 예측에 대한 연구 (Study on Estimation of PM Mass in DPF from Pressure Drop in 3L Diesel Engine)

  • 김홍석;이진욱
    • 대한기계학회논문집B
    • /
    • 제34권5호
    • /
    • pp.499-504
    • /
    • 2010
  • 디젤 매연여과장치내 포집된 입자상물질의 재생 시기를 제어하기 위해서는 매연 포집량을 정확히 예측하는 것이 중요하다. 필터내 축적된 매연 포집량은 필터 전 후의 압력차와 배기유량에 의해 예측될 수 있다. 따라서 본 연구에서는 먼저, 디젤산화촉매와 디젤매연여과장치 전 후의 각각 압력차의 비로써 정의한 매연지수의 산출을 위해 효과적인 신호처리방법을 제시하였다. 이를 3L급 승용 디젤엔진에서 정상운전조건과 과도운전조건에서 비교한 결과, 매연지수와 매연 포집량에 있어서 일정 상관관계가 있음을 알 수 있었다.