• 제목/요약/키워드: Filter band

검색결과 1,650건 처리시간 0.027초

인공전송선로를 이용한 이중모드 링-공진기 대역통과 여파기 (The Dual-Mode Ring-Resonator Bandpass Filter Using Artificial-Transmission-Lines)

  • 심경섭;황희용
    • 한국전자파학회논문지
    • /
    • 제27권5호
    • /
    • pp.424-429
    • /
    • 2016
  • 본 논문은 인공전송선로 중 하나인 LUC(Low-pass filter Unit Cell)을 이용한 이중모드 링-공진기 대역통과 여파기를 제안한다. 기존의 링 공진기 대역통과 여파기는 한 파장 링 공진기를 기반으로 설계하므로 소형화에 어려움이 있고, 정수배 파장의 고조파로 인한 원치 않는 동작의 문제점이 있다. 저역통과 특성을 지닌 인공전송선로 중 하나인 LUC를 이용하여 링-공진기를 구성함으로써 소형화와 고조파 저지 특성을 구현하였다. 링-공진기와 입력 및 출력 단의 인터디지탈 결합선로 인버터를 이용하여 2단 대역통과 여파기를 설계 및 제작하였다. 제작된 여파기는 이중모드, UWB 전 대역저지, 날카로운 스커트 특성을 나타냈으며, 기존의 링-공진기 대역통과 여파기의 링 면적을 약 60 % 감소시켰다.

광학적 두께 제어 방법에 따른 광학박막필터의 에러보상효과에 대한 비교 (Comparison of Optical Monitoring Methods for Deposition of the Optical Thin-film Filters)

  • 정성구;황보창권
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2008년도 하계학술발표회 논문집
    • /
    • pp.207-208
    • /
    • 2008
  • In this study, we present the error compensation effect of optical monitoring methods for apply of narrow band pass filter and IR-cutoff filter. Then we show the optimization process for apply of optical monitoring methods.

  • PDF

수중 센서 노드를 위한 음파 대역 인터폴레이터 설계 (Design of an Acoustic band Interpolator for Underwater Sensor Nodes)

  • 김선희
    • 디지털산업정보학회논문지
    • /
    • 제16권1호
    • /
    • pp.93-98
    • /
    • 2020
  • Research on underwater sensor networks is increasing due to such reasons as marine resource management, maritime disaster prediction and military protection. Many underwater sensor networks performs wireless communication using an acoustic sound wave band signal having a relatively low frequency. So the digital part of their modem can take charge of carrier band signal processing. To enable this, the sampling rate of the baseband band signal should be increased to a sampling rate at which carrier band signal processing is possible. In this paper, we designed a sampling rate increasing circuit based on a CIC interpolator for underwater sensor nodes. The CIC interpolator has a simple circuit structure. However, since the CIC interpolator has a large attenuation of the pass band and a wide transition band, an inverse sinc LPF is added to compensate for frequency response of the CIC interpolator. The proposed interpolator was verified in time domain and frequency domain using ModelSim and Matlab.

필터뱅크에 적합한 새로운 구조를 갖는 저대역 튜너블 BPF에 관한 연구 (A Study on Low-Band Tunable BPFs with a Novel Structure Suitable for the Filter Bank)

  • 김인선;이영중
    • 한국군사과학기술학회지
    • /
    • 제16권3호
    • /
    • pp.285-294
    • /
    • 2013
  • In this paper, we present a tunable BPF with a novel structure. The filter is very useful to optimization of low frequency filter performance, because the fiilter has air-coils and tuning screws. This filter also has the merits of light weight and small size in comparison with conventional tunable filter at low frequency. This type filters are especially suitable for switched filter bank due to tuning structure. We designed 4 channel filter bank with two SP4Ts and 4 BPFs using novel structure. Tuning processes were subsequently executed. We obtained satisfactory performances as a result; consequently, the validity of our proposal was proved.

초고주파용 필터설계를 위한 결합행렬 합성법 (Coupling Matrix Synthesis Methods for RF/Microwave Filter Design)

  • 최동묵;김채영
    • 한국통신학회논문지
    • /
    • 제32권12A호
    • /
    • pp.1346-1353
    • /
    • 2007
  • 본 논문에서는 필터함수의 감쇄극점(poles)과 반사손실(Return Loss)로부터 전송계수($S_{21}$)와 반사계수($S_{11}$)를 도출하고, 이 값들로부터 대역통과필터 설계를 위한 결합계수행렬 계산법을 제시하였다. 계산된 결합계수행렬에 유사변환을 적용하여서 결합계수행렬을 접힌 표준형 필터 구조의 커플링계수 행렬로 변환하였다. 그 결과를 이용하여 접힌 표준형 필터를 설계하였다.

Generalized Comb 필터를 사용한 CIC 필터의 통과대역 Sharpening 기법 (CIC Filter Passband Sharpening Using Generalized Comb Filters)

  • 전누리;장영범
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
    • /
    • pp.139-142
    • /
    • 2001
  • In this paper, a new CIC filter structure for reduction of passband droop in CIC decimation filter is proposed. For improvement of passband characteristics, the 1st order Generalized Comb Filter(UF) is proposed in addition to the conventional CIC decimation filter. By using this filter, it is shown that passband droop is remarkably reduced and aliasing attenuation is slightly increased. We also propose how to find the optimum filter coefficient Furthermora, it is shown that choices for GCF are possible in terms of the number of Half-Band filter. Passband droops and aliasing attenuations of the proposed structure are compared with those of the CIC structures using conventional sharpening techniques.

  • PDF

Optimized Optomechanical Anti-Aliasing Filter for Digital Camera Photography

  • Lee, Sang Won;Chang, Ryungkee;Moon, Sucbei
    • Journal of the Optical Society of Korea
    • /
    • 제19권5호
    • /
    • pp.456-466
    • /
    • 2015
  • We investigated an anti-aliasing (AA) filter for digital camera photography by which the excessively high-frequency components of the image signal are suppressed to avoid the aliasing effect. Our optomechanical AA filter was implemented by applying rapid relative motions to the imaging sensor. By the engineered motion blur of the mechanical dithers, the effective point-spread function (PSF) of the imaging system could be tailored to reject the unwanted high-frequency components of the image. For optimal operations, we developed a spiral filter motion protocol that could produce a Gaussian-like PSF. We experimentally demonstrated that our AA filter provides an improved filtering characteristic with a better compromise of the rejection performance and the signal loss. We also found that the pass band characteristic can be enhanced further by a color-differential acquisition mode. Our filter scheme provides a useful method of digital photography for low-error image measurements as well as for ordinary photographic applications where annoying $moir{\acute{e}}$ patterns must be suppressed efficiently.