다결정 실리콘으로 구성된 금속-반도체-금속(MSM) 구조의 광검출기의 광 응답 특성을 개선시키기 위해 중수소를 사용한 후속 공정을 행하였다. 다결정 실리콘 내 중수소 결합 형성 방법에 따른 광검출기의 특성 변화를 전기적 측정을 통해 비교하였다. 광검출기는 Schottky 접합 특성을 갖기 위해 Al/Ti 전극 금속이 사용되었다. 본 연구에서는 광 흡수 영역인 다결정 실리콘 내에 중수소 결합을 형성시켜 다결정 실리콘 내에 존재하는 결함을 효과적으로 passivation하여 결함밀도를 감소시키고자 한다. 후속 중수소 공정으로는 열처리 확산 방법과 이온 주입 방법을 각각 사용하였다. 중수소 열처리 확산 방법을 통해서 중수소는 다결정 실리콘의 표면 근처에 대부분 존재하였다. 다결정 실리콘의 표면은 광 흡수가 일어나는 부분이므로 중수소의 결합을 통해 광 응답 특성이 개선됨을 확인하였다. 중수소 이온 주입 방법을 통해서는 중수소를 다결정 실리콘 내부로 쉽게 분포시킬 수 있지만 다결정 실리콘 표면 근처에 결함을 만들 수 있어 광 응답 특성을 저하시키는 원인이 되었다.
본 논문에서는 먼저 습식 코팅 방법으로 페로브스카이트 (CH3NH3PbI3) 박막을 글라스 상에 형성하고, 다양한 분석 기법을 이용하여 막의 두께, 표면거칠기, 결정성, 구성성분 및 가시광 영역에서의 이 물질의 반응에 대해 논한다. 완성된 반도체 물질은 막내부에 결함(defect)이 없고 균일하며, 표면거칠기는 매우 작으며, 가시광영역에서 높은 흡수율이 관찰되었다. 다음으로 이와 같이 형성된 유무기 층에 hole 형상을 구현하기 위하여, 구멍이 일정한 간격으로 있는 메탈마스크, 페로브스카이트 물질이 코팅되어 있는 유리, 자석 순서로 되어있는 구조의 샘플을 상압플라즈마 공법을 이용하여 시간에 따른 물질에 형성되는 hole 형태의 변화를 분석하였다. 시간이 길어짐에 따라 더 많이 식각되는 것을 알 수 있으며, 이 중에서 공정 시간을 가장 오래한 샘플에 대해서는 보다 자세하게 살펴보았고, 플라즈마의 위치에 따른 차이에 의해 7영역으로 분류할 수 있었다.
Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low Water Vapor Transition Rate (WVTR) of $1{\times}10^{-6}g/m^2$/day. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2$/day) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study, we developed an $Al_2O_3$ nano-crystal structure single gas barrier layer using a Neutral Beam Assisted Sputtering (NBAS) process. The NBAS system is based on the conventional RF magnetron sputtering and neutral beam source. The neutral beam source consists of an electron cyclotron Resonance (ECR) plasma source and metal reflector. The Ar+ ions in the ECR plasma are accelerated in the plasma sheath between the plasma and reflector, which are then neutralized by Auger neutralization. The neutral beam energies were possible to estimate indirectly through previous experiments and binary collision model. The accelerating potential is the sum of the plasma potential and reflector bias. In previous experiments, while adjusting the reflector bias, changes in the plasma density and the plasma potential were not observed. The neutral beam energy is controlled by the metal reflector bias. The NBAS process can continuously change crystalline structures from an amorphous phase to nano-crystal phase of various grain sizes within a single inorganic thin film. These NBAS process effects can lead to the formation of a nano-crystal structure barrier layer which effectively limits gas diffusion through the pathways between grain boundaries. Our results verify the nano-crystal structure of the NBAS processed $Al_2O_3$ single gas barrier layer through dielectric constant measurement, break down field measurement, and TEM analysis. Finally, the WVTR of $Al_2O_3$ nano-crystal structure single gas barrier layer was measured to be under $5{\times}10^{-6}g/m^2$/day therefore we can confirm that NBAS processed $Al_2O_3$ nano-crystal structure single gas barrier layer is suitable for OLED application.
본 연구에서는 IZO를 활성층으로 하고 $HfSiO_x$를 절연층으로 한 TFT에 대하여 그 성능을 측정하였다. $HfSiO_x$는 $HfO_2$ target과 Si target을 co-sputtering 하여 증착하였으며 RF power를 달리 하여 네 가지의 $HfSiO_x$ 박막을 제작하였다. 공정의 간소화를 위해 게이트 전극을 제외한 모든 층들은 RF-magnetron sputtering system과 shadow mask만을 이용하여 증착하였으며 공정의 간소화를 위해 어떠한 열처리도 하지 않았다. 네 가지 $HfSiO_x$ 박막의 구조적 변화를 X-ray diffraction(XRD), atomic force microscopy(AFM)을 통해 분석하였고, 그 전기적 특성을 확인하였다. 박막 내 $HfO_2$와 Si의 조성비에 따라 그 특성이 현저히 차이가 남을 확인하였다. $HfO_2$(100W)-Si(100W)의 조건으로 증착한 $HfSiO_x$ 박막을 절연층으로 한 소자의 특성이 전류 점멸비 5.89E+05, 이동도 2.0[$cm^2/V{\cdot}s$], 문턱전압 -0.5[V], RMS 0.263[nm]로 가장 좋은 결과로 나타났다. 따라서 $HfSiO_x$ 박막 내의 적절한 $HfO_2$와 Si의 조성비가 계면의 질을 향상시킴은 물론, $HfO_2$자체의 trap이나 defect를 효과적으로 줄여 줌으로써 소자의 성능 향상에 중요한 요소라 판단된다.
The stochiometric mix of evaporating materials for the $CdGa_2Se_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CdGa_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD).The carrier density and mobility of $CdGa_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.27{\times}10^{17}\;cm^{-3},\;345\;cm^2/V{\cdot}s$ at 293 K. respectively. The temperature dependence of the energy band gap of the $CdGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $Eg(T)\;=\;2.6400\;eV\;-\;(7.721{\times}10^{-4}\;eV/K)T^2/(T+399\;K)$. After the as-grown single crystal $CdGa_2Se_4$ thin films were annealed in Cd-, Se-, and Ga -atmospheres, the origin of point defects of single crystal $CdGa_2Se_4$ thin films has been investigated by PL at 10 K. The native defects of $V_{Cd}$, $V_{Se}$, $Cd_{int}$, and $Se_{int}$ obtained by PL measurements were classified as donors or accepters. We concluded that the heat-treatment in the Cd-atmosphere converted single crystal $CdGa_2Se_4$ thin films to an optical p-type. Also, we confirmed that Ga in $CdGa_2Se_4/GaAs$ did not form the native defects because Ga in single crystal $CdGa_2Se_4$ thin films existed in the form of stable bonds.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제29권4호
/
pp.219-225
/
2003
Purpose: Platelet Rich Plasma(PRP) application is increasing with sinus inlay bone graft, but there is few research with radiographic ananlysis on effect of PRP in maxillary sinus. The author investigated the amount of bony changes of maxillary sinus for dental implantation among the patients with maxillary inlay graft. Materials and Methods: With 10 patients who were treated with sinus inlay autologous bone grafting combined with PRP technique, and with 5 patients who were treated with sinus inlay grafting only without PRP, the panoramic radiographys which were taken at preoperation, immediate postoperation, 3months postoperation, and 4 months postoperation(a month after dental implantation)periods were analysed. The films had been scanned, and then proceeded throughout image analysis system. The bone density of maxillary grafted sites was compared with adjacent tooth enamel density and remeasured according to density luminosity of each film. The density changes on PRP group and bone graft only group were analysed with non-parameteric statistics method. Results: In PRP combined patients group, bone density on postoperation periods was increased totally. The remarkable enhanced change of bone density was observed on 3 months postoperation period, thereafter the increasing rate was slightly reduced. In only bone graft patients group, bone density on postoperation periods was also increased compared with preoperation period, but the bone density of 4 months postoperation period was decreased compared with 3 months postoperation period. The amount of bone density on PRP group was significantly changed according to periods in contrast to bone graft only group. Conclusion: The bone density on PRP group was remarkably increased at 3 months postoperation compared to bone graft only group and it was seemed to be associated with more new bone formation, less grafted bone resorption at bone grafted sites with PRP.
AlN 단결정은 넓은 밴드갭(6.2 eV), 높은 열 전도도($285W/m{\cdot}K$), 높은 비저항(${\geq}10^{14}{\Omega}{\cdot}cm$), 그리고 높은 기계적 강도와 같은 장점들 때문에 차세대 반도체 적용을 위한 많은 흥미를 끈다. 벌크 AlN 단결정 또는 박막 템플릿(template)들은 주로 PVT(Physical vapor transport)법, 플럭스(flux)법, 용액 성장(solution growth)법, 그리고 증기 액상 증착(HVPE)법에 의해 성장된다. 단결정이 성장하는 동안에 발생하는 결함들 때문에 상업적으로 어려움을 갖게 된 이후로 결함들 분석을 통한 결정 품질 향상은 필수적이다. 격자결함 밀도(EPD)분석은 AlN 표면에 입자간 방위차와 결함이 존재하고 있는 것을 보여준다. 투과전자현미경(TEM)과 전자후방산란회절(EBSD)분석은 전체적인 결정 퀄리티와 다양한 결함의 종류들을 연구하는데 사용된다. 투과전자현미경(TEM)관찰로 AlN의 형태가 적층 결함, 전위, 이차상 등에 의해 크게 영향을 받는 것을 알 수 있었다. 또한 전자후방산란회절(EBSD)분석은 전위의 생성을 유도하는 성장 결함으로서 AlN의 zinc blende 폴리모프(polymorph)가 존재하고 있는 것을 나타내고 있었다.
급변하는 정보화 사회에서는 스마트폰와 태블릿을 비롯한 다양한 전자기기가 더욱 디지털화되고 플렉시블 디스플레이와 같은 고성능을 갖추며 발전하고 있다. 본 연구에서는 경제적 절감을 위한 플렉시블 디스플레이의 고가 소재를 대체하는 전도성 고분자인 PEDOT과 투명 기판인 PET를 적용한 TCF의 제조 공정 최적화를 진행하였다. PEDOT 코팅을 이용한 TCF 생산 공정에서 주요 변수인 생산 속도 (m/min), 코팅 최고 온도 (℃), PEDOT 공급 속도 (rpm)에 따른 표면 저항률 (Ω/□)을 반응표면분석법을 사용하여 최적화하였다. 결과적으로, 생산 속도 22.16 m/min, 코팅 최고 온도 125.28 ℃, PEDOT 공급 속도 522.79 rpm으로 최적 조건을 도출했다. F 값은 18.37, P-값은 < 0.0001, 결정계수(R2)는 0.9430으로 결과의 신뢰성이 높음을 확인했다. 최적 조건에서의 예측값은 145.75 Ω/□이며, 실험값은 142.97 Ω/□이었다. 이 연구 결과를 기반으로 대량 생산 공정에 적용하면 기존의 생산 수율 보다 높은 수율을 달성하고 불량 발생률을 줄일 수 있을 것으로 판단된다.
목적 : 자궁경부암환자의 근치목적의 방사선치료 성적을 보고하기에 앞서 본원에서 사용하고 있는 자궁강내치료기기의 선량투여 방법의 정확성을 평가해보고 각 장기의 흡수선량을 대변할수 있는 예측력이 어느정도인지 알아보고자 연구를 시행하였다. 대상 및 방법 : 조준필름의 측면사진에서는 본원에서 현재 사용중인 방광(SBD)과 직장(SRD)의 기준흡수점의 흡수선량을 확인 하였다. 골반강 자기공명상의 측면사진에서 종양의 두 횡축과 종축의 직경을 곱하여 종양부피(TV)를 측정하였고, 기본으로 사음되고 있는 등선량곡선을 그린후 선량기준점 A 의 등선량 곡선내에 자궁경부 종양이 포함되는지 대상 환자별로 확인하였으며, 방광(MBD)과 직장(MRD)에서 보여주는 최대흡수선량점의 값을 측정하였고, 또한 선량기준점 A의 등선량 곡선내에 포함되는 방광(HBV)과 직장(HRV)의 면적을 계산해 보았다. 결 과 : 45례를 대상으로 분석하였다. 이중 53%(24/45) 에서만이 선량기준점 A의 등선량곡선내에 종양이 잘 포함되었다. 적절한 포함정도는 병기보다는 원발종양의 크기와 통계학적으로 유의한 관련성을 보여주었으며 종양의 측면지름의 크기가 3cm 이상인 종양은 불충분한 포함을 보여 주었다. 조준필름의 측면상의 방광과 직장의 기준흡수선량값은 자기공명사진상의 방광과 직장의 최대흡수값과 각각 유의한 관계를 보여주지 못했으나, 조준필름의 직장의 흡수선량값(SRD)은 HRV 와 유의한 관련성을 보여주었다. HBV 이나 HRV 은 오히려 자기공명사진상에서 측정한 종양의 크기(TV) 와 유의한 연관성을 보여 주었다. 결론 : 본원에서 사용하고 있는 선량계산 방법은 개별적인 종양의 크기를 고려해주지 못하였으며, 특히 방광의 흡수선량계산에 있어서 실제 흡수선량을 대변할수 있는 예측도가 낮아서 이에 대한 환자 개개인의 종양의 특성을 고려한 선량계산이 필요하리라 사료되는 바이다.
기존 영화 산업에서 구전의 크기는 매출에 영향을 주지만 방향성은 영향을 주지 못하는 것으로 연구되었다(Liu 2006). 하지만, 이러한 분석 방법을 국내 영화 데이터에 동일하게 적용시켜 본 결과, 구전의 방향성도 영화의 매출에 영향을 주는 것으로 밝혀졌다. 이는 아시아 지역의 소비자들에게서 나타나는 독립적 자아관점과 북미 지역의 소비자들에게서 나타나는 상호의존적 자아관점의 차이로 인해 나타난 결과로 보인다. 즉, 국내 소비자의 경우는 영화를 선택/관람함에 있어 타인의 평가가 영향력을 주기 때문에 구전의 방향성도 유의한 양(+)의 값을 가진다. 기존의 연구에서는 구전의 크기가 일방적으로 매출에 영향을 미친다는 가정을 통해 영화 산업의 구전효과를 분석했으나, 이는 발생된 매출이 구전의 크기에 미치는 영향을 간과한 것이다. 따라서 매출이 구전에 미치는 효과까지 고려하여 연립방정식(Simultaneous Equation)을 통해 구전의 크기와 매출 간 상호 관계를 추정한 결과, 구전의 방향성은 위의 분석과 동일하게 영화 개봉 후 지속적으로 매출에 양(+)의 영향력을 미치는 것으로 나타났다. 하지만, 구전의 크기는 매출의 원인이 되는 것이 아니라, 오히려 매출이 증가하여 구전의 크기가 증가하는 것이라는 결과를 보여주었다. 즉, 개봉 후 1주차에는 소비자들이 영화를 선택할 때 구전의 크기와 방향성이 동시에 고려되지만, 2주차 이후로는 구전의 크기는 매출에 영향을 미치는 변수가 아니라, 매출의 증가에 따른 결과라는 사실이 밝혀졌다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.