• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.53-56
• /
• 2005

High flowable concrete was first developed in 1988 to achieve durable concrete structures. High flowable concrete can improve workability sharply reason why the concrete has properties of resistance to segregation, filling ability, passing ability without compacting. Therefore, as we apply a high flowable concrete to a large dimensional tunnel which constructed in special environment, we can get workability, strength and durability required. Tunnel lining concrete with a large dimension has to use necessarily fly ash and slag for the properties of high flowability and watertight. We can expect improvement of workability and durability, mitigation of hydration, reducing shrinkage, enhancement of watertight by using cementitious materials. This paper proposes investigations for establishing a mix-design method and high flowability-strength testing methods have been carried out from the viewpoint of making a standard concrete tunnel lining with large dimension a standard.

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.101-106
• /
• 1981

The purpose of this study was to estimate the ability of the marginal fit of Glass ionomer cement. Using the human extracted teeth and 2% acqueous solution of methylene blue, the author investigated the marginal penetration of dye in restorative materials such as Amalgam, Hi-Pol, Glass ionomer cement, Estic microfill and Restodent. The results were as follows. 1. All filling materials showed some degree of marginal penetration. 2. Glass ionomer cement revealed nearly the same microleakage as Estic microfill and Hi-Pol, but showed inferior effect of the marginal seal as compared with Restodent. 3. It is appeared that Amalgam has more effective ability of the marginal fit than the others within a week.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8363-8369
• /
• 2015

This study is to be investigate properties of workability, compacting and compressive strength replaced by the illite powder in high fluidity concrete. For this purpose, illite powder has replaced the binder of high fluidity concrete of 5%, 10%, 15%, 20%. After concrete mixing, slump flow test, reach time slump flow 500mm, O-lot test were conducted on fresh high fluidity concrete. And compressive strength was determined 28 days for the hardened high fluidity concrete specimens. According to the test results, the workability, filling height of high fluidity concrete were increased in 10% replacement of illite powder. Furthermore, the compressive strength of high fluidity concrete was increased in 10% replacement of illite powder.. It was possible to confirm that optimal mixture ratio of illite powder seems to exist, and it is shown to be 10% according to our experimental results.

• Computers and Concrete
• /
• v.15 no.2
• /
• pp.215-229
• /
• 2015

The emerging technology of self compacting concrete, fiber reinforcement together reduces vibration and substitute conventional reinforcement which help in improving the economic efficiency of the construction. The objective of this work is to find the regression model to determine the response surface of mix proportioning Steel Fiber Reinforced Self Compacting Concrete (SFSCC) using statistical investigation. A total of 30 mixtures were designed and analyzed based on Design of Experiment (DOE). The fresh properties of SCC and mechanical properties of concrete were studied using Response Surface Methodology (RSM). The results were analyzed by limited proportion of fly ash, fiber, volume combination ratio of two steel fibers with aspect ratio of 50/35: 60/30 and super plasticizer (SP) dosage. The center composite designs (CCD) have selected to produce the response in quadratic equation. The model responses included in the primary stage were flowing ability, filling ability, passing ability and segregation index whereas in harden stage of concrete, compressive strength, split tensile strength and flexural strength at 28 days were tested. In this paper, the regression model and the response surface plots have been discussed, and optimal results were found for all the responses.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.4
• /
• pp.323-331
• /
• 2014

Purpose : To assess the usefulness of rectal filling using ultrasonographic gel in patients with lower rectal cancer. Materials and Methods: Twenty five patients with lower rectal cancer were enrolled. High resolution pelvic MR was performed twice before and after gel filling. Independently and retrospectively, two radiologists reviewed each set of MR images using five-grade scales for sphincter involvement, CRM (circumferential resection margin) involvement and depiction of the tumor. Same two radiologists retrospectively performed consensus review of each set of MR images for tumor distance from the anal verge and T&N staging. Results: Tumor depiction scores from MR with gel filling were significantly higher than those of MR without distention (p<0.001). Compared to MR without distension, MR with gel filling had no significant differences in prediction of CRM or sphincter involvement (p>0.05). Distance from the anal verge was significantly different between MR with gel filling and rigid endoscopy ($6.8{\pm}1.6cm$ vs. $5.8{\pm}1.6cm$, p=0.001). There were no significant differences between pathological staging and MR staging with or without gel filling. Conclusion: MR with gel filling improved tumor depiction. And also MR with gel filling revealed same ability for the predictions of CRM or sphincter invasion in patients with lower rectal cancer, comparing with MR without gel filling.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.657-665
• /
• 2013

The purpose of this study is the basic research of self-compacting concrete using Alkali-Activated Slag (AAS) binder in order to emphasize the durability of structures and facilitate casting the fresh concrete in field. The AAS binder emitted low carbon dioxide ($CO_2$) is eco friendly material of new concept because AAS products not only emit little $CO_2$ during production but also reuse the industrial by-products such as ground granulated blast-furnace slag (GGBS) of the steel mill. Until now, almost of domestic and foreign research are using Ordinary Portland Cement (OPC) for self-compacting concrete, and also, nonexistent research about AAS. The self-compacting concrete must get the performance of flowability, segregation resistance, filling and passing ability. Nine concrete mixes were prepared with the main parameter of unit amount of binder (400, 500, 600 $kg/m^3$) and 3 types of water-binder (W/B) ratio. The results of test were that fresh concretes were satisfied with flowability, segregation resistance, and filling ability of JSCE. But the passing ability was not meet the criteria of EFNARC because of higher viscosity of AAS paste than OPC. This high viscosity of AAS paste enables the manufacturing of self compacting concrete, segregation of which does not occur without the using of viscosity agent. It is necessary that the development of high fluidity AAS binders of higher strength and the study of better passing ability of AAS concrete mixes in order to use self compacting AAS concrete in field.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.370-376
• /
• 2011

Recently, the application range of plastic gears is widely expanding by the development of engineering plastics with good mechanical properties. Plastic gears have excellent performances such as light weight, water resistance and vibration absorbing ability for metallic gears. In this study, the optimization of injection molding process was done for the large disk type plastic gears of auto phoropter. Design Of Experiment (Taguchi method) was adopted to find a tendency of molding conditions that influence the flatness of disk type gear. Four main factors for molding conditions were selected based on injection temperature, filling time, packing pressure and mold temperature. Also, Filling, packing and cooling analyses were carried out to evaluate Z directional deflection of large disk type gear by using the simulation software (Moldflow) based on the DOE. From the results, it was found that the injection temperature and packing pressure are the most sensitive parameters for the Z directional deflection of large disk type gears.

• Transactions of Materials Processing
• /
• v.4 no.3
• /
• pp.214-221
• /
• 1995

In the paper, we have proposed a new method to determine the initial billet for the forged products using a function approximation in the neural network. The architecture of neural network is a three-layer neural network and the back propagation algorithm is employed to train the network. By utilizing the ability of function approximation of a neural network, an optimal billet is determined by applying the nonlinear mathematical relationship between the aspect ratios in the initial billet and the final products. The amount of incomplete filling in the die is measured by the rigid-plastic finite element method. The neural network is trained with the initial billet aspect ratios and those of the unfilled volumes. After learning, the system is able to predict the filling regions which are exactly the same or slightly different to the results of finite element simulation. This new method is applied to find the optimal billet size for the plane strain rib-web product in cold forging. This would reduce the number of finite element simulation for determining the optimal billet size of forging product, further it is usefully adapted to physical modeling for the forging design.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.1
• /
• pp.10-19
• /
• 2003

Caption information in news videos can be useful for video indexing and retrieval since it usually suggests or implies the contents of the video very well. In this paper, a new algorithm for extracting and recognizing characters from news video is proposed, without a priori knowledge such as font type, color, size of character. In the process of text region extraction, in order to improve the recognition rate for videos with complex background at low resolution, continuous frames with identical text regions are automatically detected to compose an average frame. The image of the averaged frame is projected to horizontal and vertical direction, and we apply region filling to remove backgrounds to produce the character. Then, K-means color clustering is applied to remove remaining backgrounds to produce the final text image. In the process of character recognition, simple features such as white run and zero-one transition from the center, are extracted from unknown characters. These feature are compared with the pre-composed character feature set to recognize the characters. Experimental results tested on various news videos show that the proposed method is superior in terms of caption extraction ability and character recognition rate.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.1
• /
• pp.32-40
• /
• 2006

The nitrogen (N) absorption and partition of the rice plants are important indicators that can be used to improve the N use efficiency (NUE) of the plants. Improving the plant NUE can help to avoid nutrient waste that may cause environmental pollution. To investigate the N absorption and partition of the rice plants, Hwaseongbyeo (Japonica) and Dasanbyeo (indica/japonica) were applied with N fertilizers at the rates of 60, 120, and 180 kg N per ha in paddy field. Also micro plots of $0.81m^2$ were established inside each plot for application of $^{15}N-labeled$ fertilizer. The differences in N utilization of the rice plants were associated with the total N absorption and partitioning after the heading stage. In the grain filling period, the increase of nitrogen content in the total and leaf blades of Dasanbyeo was higher than that of Hwaseongbyeo. Soil N was the main contributor for the increase of total N of Dasanbyeo during the grain filling period. The N fertilizer uptake rate of Hwaseongbyeo rapidly increased with the increment of N fertilization rate. In Dasanbyeo, N fertilizer uptakes were similar under all rates and times of N application. From heading stage to harvest, Dasanbyeo continued accumulating nitrogen, whereas Hwaseongbyeo had small changes. In conclusion, the difference in nitrogen absorption and partition after heading of the two cultivars was caused by the ability of Dasanbyeo to accumulate and remobilize soil nitrogen to the grains during the grain filling period.