• 박물관보존과학
• /
• 제22권
• /
• pp.41-52
• /
• 2019

부여 능산리 서고분군 1, 2호분의 석실내부 벽화의 존재 여부를 확인하기 위하여 육안조사와 현장에서의 현미경 관찰, 형광X선분석을 수행하고, 일부 채취 시료에 대한 X선회절분석을 수행하였다. 그 결과, 1호분은 석벽의 표면 마무리 상태가 거칠고, 현실 천정을 제외한 부위에서는 벽화의 어떠한 흔적도 관찰되지 않았다. 또한 현실 천정에서는 석재와는 다른 색의 흑색 물질이 관찰되는데, 이 부분의 경우에도 표면부와 표면을 살짝 긁어내어 드러난 내부가 동일한 육안적 특징을 보이며, 이 부분에서 채취한 시료에서 흑운모가 주된 광물로 동정되어 먹 등 인위적 물질을 칠한 것이 아니라 석벽의 구성광물인 것으로 확인되었다. 2호분의 경우 내부 동, 서, 북의 석벽 표면에서 백색물질이 관찰되며, 이 물질에 대한 분석 결과 석회(Calcite)로 확인되어 벽화의 존재가 의심되었다. 그러나 석회층이 동벽의 현실입구와 연도부분에 집중되어 있으며, 북벽과 서벽의 경우에는 단지 하부에서만 집중적으로 관찰되었다. 또한 동벽의 현실입구와 연도부분의 석회물질은 그 분포 형태가 도굴 갱으로 유입된 흙이 쌓인 흔적과 상응하고 있어 2호분 내벽의 석회물질은 외부의 흙과 석회가 유입되어 형성된 것으로 판단되었다. 또한 천장과 사면의 석판틈새에서 확인되는 메움 물질은 분석결과 니질의 토양으로 석벽 표면에 존재하는 석회와는 다른 물질로 확인되었다. 만약 벽화를 조성할 목적으로 석벽표면에 석회층을 인위적으로 형성한 것이라면 석판틈새 매움 물질도 석회를 사용하는 것이 더 자연스러웠을 것이다. 이러한 점으로 보아 능산리 2호분의 현실과 연도의 내벽에도 벽화는 없는 것으로 판단된다.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.69-83
• /
• 1999

연약지반 개량시 사용되고 있는 샌드매트용 모래의 대체 재료로서 이용 가능성 여부를 전로 슬래그를 대상으로 담수와 해수를 사용하여 입경별, 시간 경과별, 에이징 처리 후 투수계수 변화를 실내시험을 통해 파악하였다. 담수 사용시, 10 mm 미만의 입경을 갖는 A시료와 B시료의 투수계수는 각각 $6.52\times10_{-2}cm/sec,\; 5.99\times10^{-1}cm/sec$으로 측정되는 반면에 해수를 사용할 경우에는 각각 $1.88\times10_{-2}cm/sec,w;3.86\times10^{-1}cm/sec$로 감소하였으며 또한 동수경사와 침투유속의 관계에서 난류흐름이 지배한 것으로 나타났다. 특히, 해수 사용시 100일 동안의 시간경과에 따른 A시료와 B시료의 투수계수는 초기 값보다 1/10배로 감소하는 경향을 보이는데 이는 유리 석회(CaO)에 의한 간극의 막힘 영향으로 확인되었다.

• Computers and Concrete
• /
• 제11권2호
• /
• pp.93-104
• /
• 2013

The use of rock wool waste, an industrial by-product, in cement-based composites has positive effects on the environment because it reduces the problems associated rock wool disposal. The experiments in this study tested cement-based composites using various rock wool waste contents (10, 20, 30 and 40% by weight of cement) as a partial replacement for Portland cement in mortars. The pozzolanic strength activity test, flow test, compressive strength test, dry shrinkage test, absorption test, initial surface absorption test and scanning electron microscope observations were conducted to evaluate the properties of cement-based composites. Test results demonstrate that the pozzolanic strength activity index for rock wool waste specimens is 103% after 91 days. The inclusion of rock wool waste in cement-based composites decreases its dry shrinkage and initial surface absorption, and increases its compressive strength. These improved properties are the result of the dense structure achieved by the filling effect and pozzolanic reactions of the rock wool waste. The addition of 30% and 10% rock wool wastes to cement is the optimal amount based on the results of compressive strength and initial surface absorption for a w/cm of 0.35 and 0.55, respectively. Therefore, it is feasible to utilize rock wool waste as a partial replacement of cement in cement-based composites.

• 한국재료학회지
• /
• 제24권9호
• /
• pp.474-480
• /
• 2014

Process conditions for the impregnation of polycarbosilane preceramic polymer into SiC-based composites were investigated. Two kinds of preceramic polymer (PCP) was impregnated into SiC-fiber fabrics with different solvents of n-hexane and divinylbenzene (DVB). Both microstructural observations and mechanical tests were conducted to evaluate the impregnation. The matrix phases were particulated in the case of hexane solvents. Apparent relative density of the matrix was about 78.8%. The density of matrix was increased to about 96.1-98.8% when the DVB was used; however, brittle fracture was observed during a bending test. The modulus of toughness was less than $0.74J/m^3$. The fabric impregnated with a mixed PCP-dissolved solution showed intermediate characteristics with relative high density of filling (apparent density of ~96.1%) as well as proper bending behavior. The modulus of toughness was increased to about $5.31J/m^3$. The composites developed by changing the precursor and solvent suggested the possibility of fabricating SiCf/SiC composites without a fiber to matrix interphase coating.

• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.39.1-39.8
• /
• 2019

The present report presents a case of dens invaginatus (DI) in a patient with 4 maxillary incisors. A 24-year-old female complained of swelling of the maxillary left anterior region and discoloration of the maxillary left anterior tooth. The maxillary left lateral incisor (tooth #22) showed pulp necrosis and a chronic apical abscess, and a periapical X-ray demonstrated DI on bilateral maxillary central and lateral incisors. All teeth responded to a vitality test, except tooth #22. The anatomic form of tooth #22 was similar to that of tooth #12, and both teeth had lingual pits. In addition, panoramic and periapical X-rays demonstrated root canal calcification, such as pulp stones, in the maxillary canines, first and second premolars, and the mandibular incisors, canines, and first premolars bilaterally. The patient underwent root canal treatment of tooth #22 and non-vital tooth bleaching. After a temporary filling material was removed, the invaginated mass was removed using ultrasonic tips under an operating microscope. The working length was established, and the root canal was enlarged up to #50 apical size and obturated with gutta-percha and AH 26 sealer using the continuous wave of condensation technique. Finally, non-vital bleaching was performed, and the access cavity was filled with composite resin.

• 터널과지하공간
• /
• 제24권5호
• /
• pp.395-403
• /
• 2014

본 연구에서는 특수 재질의 경량 고강도 강관 록볼트를 개발하였다. 그라우트 주입확인시험을 실시하여 완전충전이 이루어지는지 알아보았고 인장시험을 통해 항복내하력을 조사하였으며 이를 기존의 이형봉강 록볼트와 비교하였다. 또한, RMR 분류등급이 서로 다른 국내 3개 현장에서 실시한 현장인발시험을 통해 본 록볼트의 강도 및 신장특성을 확인하였다. 개발된 록볼트는 이형봉강 록볼트에 비해 항복내하력이 클 뿐 아니라 경량이라 취급이 용이하며, 그라우트 완전충전 효과에 따라 부식성 환경에서 내구성이 클 가능성이 있는 것으로 생각된다.

• Journal of Periodontal and Implant Science
• /
• 제33권3호
• /
• pp.533-542
• /
• 2003

The purpose of this study is to evaluate histologic result of bone substituting material on defects followed tooth extraction. We compare the histologic findings control, DFDBA, Bio-Oss(R), and $Regenafil^{TM}$, Briefly, mandibular premolar teeth were extracted available for bone filling. All alveolar sites were checked after extraction and thoroughly debrided with a dental curet to remove the periodontal ligament. Extraction sites were prepared dehiscence on buccal side 7mm height from alveolar crest. The graft materials were filled into the extraction socket and dehiscenc defects. The animals were sacrificed 12 weeks after implantation. Both treated and control mandibular sites were histologically evaluated with light microscopy. Histologic observation at 12 weeks revealed that control and experimental sites were healed uneventfully and directly apposed to new bone without any adverse tissue reaction. DFDBA and Bio-Ossn(R)sites maintain width of alveolar crest but were not fully resorbed. $Regenafil^{TM}$ sites also maintain width and particles were resorbed more than other graft materials. From this results, it was suggested that $Regenafil^{TM}$ is promising boen substituting materials maintaining the width of alveolar crest and height follewed tooth extraction.

• 대한치과보철학회지
• /
• 제14권1호
• /
• pp.47-54
• /
• 1976

Pulpal temperature is changed in response for various conditions which were mechanical, thermal, chemical and biological stimuli. This study was performed to determine the pulpal temperature changes which were using air turbine with air-water coolant, water coolant, and conventional dental engine with water coolant and no coolant on 28 canine of dogs. In order to record pulpal temperature, pulp chamber was opened on the labiocervical area of canine. Thermocouple was inserted into pulp chamber and was fixed with filling material(dycal). Changes of pulpal temperature were recorded on the physiograph, which had been standardized temperature degree, through thermocouple to thermistor bridge and carrier preamplifier. The amount of experimental temperature change to that of control was interpreted in the pulpal cavity. The obtained results were as followings: 1. The mean normal temperature was 33.07 centigrade. 2. The temperature was decreased than normal pulpal temperature. It was 12.04 centigrade in reduction by air turbine with air-water coolant, 7.17 centigrade in reduction by air turbine with air coolant, 5.54 centigrade in reduction by conventional engine with water coolant, and 1.26 centigrade in reduction by conventional engine with no coolant. 3. The time for maximal temperature change was 53.3 seconds in reduction by air turbine with air-water coolant, 73.4 seconds in reduction by air turbine with air coolant, 50.9 seconds in reduction by conventional engine with water coolant, and 27.1 seconds in reduction by conventional engine with no coolant. 4.. After reduction was ceased, the recovery time to normal pulp temperature was 287.1 seconds in air turbine with air-water coolant, 189.0 seconds in air turbine with air coolant, 86.9 seconds in conventional engine with water coolant, and 52.9 seconds in conventional engine with no coolant respectively.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1619-1619
• /
• 2001

Ourwork aims to assess the content of dry matter, protein, cell wall parameters and water soluble carbohydrates in forages without having to handle samples, transport them to a laboratory, dry, grind and chemically analyze them. for this purpose, the concept of fresh forage analysis under field conditions by means of compact integrated NIRS InGaAs-diode array instruments on small plot harvesters is being evaluated for plant breeding trials. This work was performed with the world first commercial experimental forage plot harvester equipped with a NIRS module for the collection, compression, and scanning of forage samples (including automatic referencing and dark current measure ments). It was used for harvesting and analyzing a number of typical forage grass and forage legume plot trials. After NIRS measurements in the field each sample was again analyzed in the laboratory by means of a conventional grating spectrometer equipped with Si-and PbS-detectors. Conventional laboratory analysis of the samples was restricted to dry matter (DM) content by means of oven drying at 105. Routine chemometric procedures were then employed to assess the comparative accuracy and precision of the DM assessments in the spectral range between 950 and 1650nm by the NIRS diode array as well as by the conventional NIRS scanning instrument. The results of this study confirmed that the type of NIRS diode array instrument employed here functioned well even in rugged field operations. further refinements proved to be necessary for optimizing the automatic filling of the sample compartment to adjust for the wide variation in forage material under conditions of extremely low or high harvest yields. The error achieved in calibrating the apparatus for forages of typical DM content proved to be satisfactory (SECV < 1.0). Possibly as a consequence of higher sampling errors, its performance in atypical forages with elevated DM contents was less satisfactory. The error level obtained on the conventional grating NIR spectrometer was similar to that of the diode array instrument for both types of forage.

• 한국안전학회지
• /
• 제9권1호
• /
• pp.100-109
• /
• 1994

In this study, it is investigated that the possibility of the numerical simulation for the incineration of the hazardous material, crbon tetrachloride($CCl_4$). A 3-dimensional numerical technology is applied for turbulent reacting flows of the full-scale Dow Chemical incinerator. The calculations are made by a CRAY-2S, super computer. The major parameters considered in this study are kiln revolution rate (rpm), filling ratio of the solid waste(f), burner Injection velocity and angle, and turbulent air jets for swirl. And the employed turbulent reaction model is the eddy break-up model which is a kind of fast chemistry model assuming general equilibrium and used for a premixed flame. The calculated flow fields are presented and discussed. 1) The presence of turbulent air nozzles for swirl gives rise to visible increase of the convective motion over the region of the solid waste. This implies the possibility to enhance the mixing of the waste with the surrounding all and thereby to reduce thermal and species stratification, which were reported in a large rotary kiln operation. 2) Considering that the location of the recirculation region has a strong relation with the heating rate of the solid waste, the control of the recirculation region by the burner injection angle Is quite desirable in the sense of the flexible design of the rotary kiln incinerator for a carbon tetrachloride. 3) Finally, it is found that the eddy break-up model Is not suitable for carbon tetrachloride($CCl_4$) because this model is not incorporated the flame inhibition trend due to the presence $CCl_4$compound.