• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.645-648
• /
• 2008

교량 신축이음장치의 파손 유형을 보면, 그 원인이 주로 후타재와 관련된 부재에서 많이 발생하는것을 알 수 있다. 중차량 통과에 따른 충격과 진동하중으로 인해서 후타재의 파손이 심하게 일어나고, 신축이음장치를 후타재에 고정하기 위해서 사용하는 앵커에서 풀림 현상이 많이 발생하고 있다. 후타재의 파손은 모든 신축이음장치에서 발생하는 현상으로 기존의 후타재로는 신축이음장치의 종류와 관계없이 차량의 충격하중을 충분히 흡수할 수 없으므로, 차량이 교량의 신축이음장치를 통과 할 때에 가해지는 충격하중으로부터 하자 발생원인을 제거하기 위해서는 충격하중을 흡수 할 수 있는 새로운 후타재의 개발이 절실하게 필요한 상황이다. 따라서 본 연구에서는 에폭시변성 폴리우레탄 바인더와 필러(filler), 골재를 사용하여 우수한 성능을 갖는 고내충격성 모르타르를 개발하는데 목적을 두었다.

• 대한두개안면성형외과학회지
• /
• 제21권1호
• /
• pp.15-21
• /
• 2020

Background: Autologous fat is considered an ideal filler material, and the use of cryopreserved fat grafts is promising in terms of flexibility and efficiency. Therefore, cryopreserved fat grafts have become more common in recent years; however, their complications require further consideration. Methods: We evaluated 53 patients who underwent facial lipofilling at our institution to confirm the clinical usefulness and safety of cryopreserved fat. Fresh fat injections with or without cryopreserved fat were administered. At one or more sites, 22 patients had a single fresh fat injection, four patients had two or more fresh fat injections, 16 patients had one fresh fat injection followed by one cryopreserved fat injection, six patients had one fresh fat injection followed by two cryopreserved fat injections, and five patients had two fresh fat injections and one or more cryopreserved fat injections. Results: In total, 281 sets of injection procedures were performed at various sites, of which 170 involved one fresh fat injection, 89 involved one fresh fat injection and one cryopreserved fat injection, and 11 involved one fresh fat injection and two cryopreserved fat injections. One patient experienced self-resolving inflammation as a complication after the second injection in the right cheek. No statistically significant differences were found between the fresh and cryopreserved fat injections. Conclusion: We suggest that cryopreserved fat is a useful and safe resource for multiple fat injections, with advantages including aseptic fat handling and the delicacy of the technique.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.191-196
• /
• 2019

This study assessed the feasibility of a Ti₃AlC₂ MAX phase as an Al-source for the formation of a mullite bond in the fabrication of porous SiC tubes with high strength. The as-received Ti₃AlC₂ was partially oxidized at 1200℃ for 30 min before using to minimize the abrupt volume expansion caused by oxidation during sintering. Thermal treatment at 1100-1400℃ for 3 h in air led to the formation of Al₂O₃ by the decomposition of Ti₃AlC₂, which reacted further with oxidation-derived SiO₂ on the SiC surface to form a mullite phase. The fabricated porous SiC tubes with a relative density of 48 - 62 % exhibited mechanical strengths of 80 - 200 MPa, which were much higher than those with the Al₂O₃ filler material. The high mechanical strength of the Ti₃AlC₂-added porous SiC was explained by the rigid mullite neck formation along with the retained Ti₃AlC₂ with good mechanical properties.

• Composites Research
• /
• 제27권5호
• /
• pp.201-206
• /
• 2014

Utilizing waste materials in making useful products is a globally increasing trend. This can reduce the cost and environmental issues. In this study, oyster shell powder (OSP) is reinforced as a filler in polypropylene (PP) matrix to make a new composite. The purpose is to improve fire retardant properties of PP as a result of OSP reinforcement. Mechanical, fire retardant and water absorption properties of the new composite have been studied in this research. Concentration of OSP reinforcement in PP has been varied by wt% and its effect on the above mentioned properties has been observed. SEM (scanning electron microscopy) images of tensile and bending fractured surfaces have been taken to observe the failure mechanism during mechanical tests. An increase in the fire retardancy has been observed as a result of the OSP reinforcement while tensile strength decreased. Stiffness also increased with the addition of OSP in PP.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1053-1059
• /
• 1996

The pulse-echo response of the piezoceramics PZT-polymer 3-3 type composite transducers with various PVA additions were investigated. The PZT powder was prepared by the molten salt synthesis method. The porous PZT specimens will be used as a filler to make 3-3 type comosite were prepared from a mixture of PZT and polyvinylalcohol(PVA) sphere by utilizing BURPS(Bumout Plastic Sphere) technique. It was shown that the transmitting and receiving sensitivity of 3-3 type piezoelectric composite transducers could be improved than that of solid PZT transducers. The reason is that 3-3 type piezoelectric composite have low dielectric constant, density and acoustic impedance. The distance between transducer and reflector was in good agreement with the distance calculated from the longitudinal velocity of the specimens and receiving time observed pulse-echo responses on the ultrasonic transducer analyzer.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.164-165
• /
• 2015

Recently, the reason of using foamed concrete is for core of panel, filler of construction material to give lightness. However, cement causes environmental problem. The cement generates CO₂ but we normally use cement during manufacturing foamed concrete. Accordingly, this study focuses on dynamic properties of matrix according to the addition ratio of paper ash to make lightweight matrix with blast furnace slag and paper ash which are industrial by-product. The experiment progessed in order to select th optimum mixing ratio of the blast furnace slag and paper ash. There are totally 7 levels such as B100:P0, B95:P5, B90:P10, B85:P15, B80:P20, B75:P25, B70:P30 in this study. As a result of the test, B95:P5 matrix has the best density and compressive strength.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.360-367
• /
• 2011

Macroporous silicon carbide (SiC) ceramics were fabricated by powder processing and polymer processing using carbon-filled polysiloxane as a precursor. The effects of the starting SiC polytype, template type, and template content on porosity and flexural strength of macroporous SiC ceramics were investigated. The ${\beta}$-SiC powder as a starting material or a filler led to higher porosity than ${\alpha}$-SiC powder, owing to the impingement of growing ${\alpha}$-SiC grains, which were transformed from ${\beta}$-SiC during sintering. Typical flexural strength of powder-processed macroporous SiC ceramics fabricated from ${\alpha}$-SiC starting powder and polymer microbeads was 127 MPa at 29% porosity. In contrast, that of polymer-processed macroporous SiC ceramics fabricated from carbon-filled polysiloxane, ${\beta}$-SiC fillers, and hollow microspheres was 116MPa at 29% porosity. The combination of ${\alpha}$-SiC starting powder and a fairly large amount (10 wt%) of $Al_2O_3-Y_2O_3$ additives led to macroporous SiC ceramics with excellent flexural strength.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1337-1345
• /
• 2018

The reliability of power transmission and distribution depends up on the consistency of insulation in the high voltage power transformer. In recent times, considering the drawbacks of conventional mineral oils such as poor biodegradability and poor fire safety level, several research works are being carried out on natural ester based nanofluids. Earlier research works show that sunflower oil has similar dielectric characteristics compared with mineral oil. BIOTEMP oil which is now commercially available in the market for transformers is based on sunflower oil. Addition of nanofillers in the base oil improves the dielectric characteristics of liquid insulation. Only few results are available in the literature about the insulation characteristics of nano modified natural esters. Hence understanding the influence of addition of nanofillers in the dielectric properties of sunflower oil and collecting the database is important. Considering these facts, present work contributes to investigate the important characteristics such as partial discharge, lightning impulse, breakdown strength, tandelta, volume resistivity, viscosity and thermal characteristics of $SiO_2$ nano modified sunflower oil with different wt% concentration of nano filler material varied from 0.01wt% to 0.1wt%. From the obtained results, nano modified sunflower oil shows better performance than virgin sunflower oil and hence it may be a suitable candidate for power transformer applications.

• 박물관보존과학
• /
• 제11권
• /
• pp.53-60
• /
• 2010

본 고에서는 해저 출토 도자기의 특징을 설명하고 전반적인 보존처리과정을 소개하고자한다. 우선 해저 출토 유물의 특성 상 탈염처리를 통하여 청자 장고 내부의 염을 제거하였으며, X-Ray 촬영을 하여 내, 외부 손상정도를 파악하였다. 결손부위는 밀랍왁스(beeswax)를 사용하여 복원 틀을 만들고, 청자 몸통부분의 태토와 유사한 색감과 질감을 가진 토기 파편을 분쇄하여 충전제와 함께 복원제를 제작하여 복원하였다. 복원 후에는 복원부위가 육안으로 식별 가능하도록 색맞춤을 진행하였다.

• Steel and Composite Structures
• /
• 제25권6호
• /
• pp.649-661
• /
• 2017

This paper is motivated by the lack of studies in the technical literature concerning to the influence of carbon nanotubes (CNTs) waviness and aspect ratio on the vibrational behavior of functionally graded nanocomposite annular sector plates resting on two-parameter elastic foundations. The carbon nanotube-reinforced (CNTR) plate has smooth variation of CNT fraction based on the power-law distribution in the thickness direction, and the material properties are also estimated by the extended rule of mixture. In this study, the classical theory concerning the mechanical efficiency of a matrix embedding finite length fibers has been modified by introducing the tube-to-tube random contact, which explicitly accounts for the progressive reduction of the tubes' effective aspect ratio as the filler content increases. Parametric studies are carried out to highlight the influence of CNTs volume fraction, waviness and aspect ratio, boundary conditions and elastic foundation on vibrational behavior of FG-CNT thick sectorial plates. The study is carried out based on three-dimensional theory of elasticity and in contrary to two-dimensional theories, such as classical, the first- and the higher-order shear deformation plate theories, this approach does not neglect transverse normal deformations. The annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. For an overall comprehension on 3-D vibration of annular sector plates, some mode shape contour plots are reported in this research work.