• Elastomers and Composites
• /
• v.33 no.1
• /
• pp.44-51
• /
• 1998

The purpose of this experiments were investigated on the physical properties of rubber com-pounds containing two types carbon black. Bound rubber and interaction coefficient for com-pounds with pure carbon black were higher than those for the compounds with dual phase carbon black. Slightly higher values in 300% modulus and tensile strength indicated that the ratio of rubber-filler bound to rubber-rubber bound of pure carbon black were higher than those of com-pounds with dual phase carbon black. It was founded that dynamic properties, that is rebound, heat build-up, 0 & $60^{\circ}C$ tan $\delta$, and cut and chip loss of compounds with dual phase carbon black were better than those of compounds with pure carbon black, but abrasion property of dual phase carbon black was lower than those of pure carbon black because of low reinforcing ability.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1815-1818
• /
• 2006

Imogolite which has chemical composition, $(HO)_3Al_2O_3SiOH$, was synthesized with orthosilicate acid and aluminium chloride at low pH solution. It has extremely large aspect ratio with an external diameter of 2nm and the length of a few micrometers. The high aspect ratio of the imogolite could make the material as the filler for the high strength fiber and as the wire for the electronic applications. Here, Imogolite that derives considerable microporosity from a nanometer-sized tubular structure has been modified with a conducting polymer, polypyrrole. Its bonding and wiring structure were confirmed by IR and TEM. The measured conductivity after modification with polypyrrole increased with polypyrrole thickness at various voltage conditions.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.215-216
• /
• 2006

To lower the cost of MIM products, the gate and runner materials and green parts with defects are usually recycled. It is necessary to understand what causes the recycled products to deteriorate. The results show that the viscosity of the 1R (recycled once) feedstock was slightly lower than that of the fresh material. However, as the number of recyclings increased, the viscosity increased, while the density decreased, and more defects were noticed duri ng solvent debinding. These deteriorations were mainly caused by the increase of the melting point of the backbone binder and the oxidation of the filler or paraffin wax.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1343-1344
• /
• 2007

In this paper, we investigated mechanical characteristics about thermal properties in semiconductor layer of power cables. Method of specimen making used solution mixing and Tensometer 2000 of Alpha used for measurement of stress and strain. Semiconductor layer made an experiment on separately environmental temperature$[25^{\circ}C]$ and high temperature$[90^{\circ}C]$ which running temperature$[90^{\circ}C]$ of cables exposed. As a result, specimen of applicable DFS(Dual Filler System) could know mechanical superiority that its structural characteristics reinforcement considered thermal characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.1
• /
• pp.18-24
• /
• 1982

The Tree phenomenon of the PMMA resin depends on an annex of the inorganic fillers and water. If the internal of an arganic insulating materials exist the fault of inorganic fillers, Void and Projecting part, the high voltage concentrates in this place. It leaves a trace about the partical breakdown and this phenomenon develops into the degration of insulating material. This paper researchses that have an effect on the tree phenomenon by the inorganic fillers and water. The results is as follow. (1) The growth of tree are less the influence of inorganic fillers. Because , the constant of water are more. (2) If the tree branches contact the inorganic filler, the advance are relaxation.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.201-208
• /
• 2019

Superabsorbent hydrogel (SAH) is a lightly crosslinked hydrophilic functional polymer material comprising a flexible chain structure, which can absorb and retain high amounts of water or aqueous fluids even under high pressure. Therefore, it is important to improve their characteristics such as absorption performance, residual monomer content, and water permeability. SAH nanocomposites were prepared using clay mineral as an inorganic filler and the influence of post-treatment processes such as quenching and aging process on their properties was studied. In addition, surface-crosslinking process was applied to improve the absorption performance associated with mechanical properties and water permeability. The structure of the SAH was characterized using attenuated total reflectance Fourier transform infrared spectroscopy, X-ray diffraction analysis, and scanning electron microscopy.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.277-280
• /
• 2020

In this study, mesoporous hollow silica spheres were synthesized using a polystyrene core and cetyltriammonium chloride (CTACl) as a pore template, and a low-cost water glass instead of expensive tetraethyl orthosilicate (TEOS) as a precursor. In addition, the material was synthesized by varying the concentration of polystyrene. Later, the polystyrene core and CTACl were removed by firing in a high-temperature heat-treatment process. The synthesized product was analyzed by various methods, such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), and N2-sorption analysis. It was confirmed that the hollow silica sphere had a hexagonal structure with a Brunauer-Emmett-Teller (BET) specific area of 1623 ㎡/g.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.17-25
• /
• 2021

In this study, the mechanical properties of railway-vehicle aluminum under frame was investigated based on the metal inert gas (MIG) welding conditions. An aluminum-alloy (6005A-T6) extruded material used in the lower panel of a railway vehicle was connected through MIG welding to determine the mechanical properties of MIG welds. Argon shielding gas and filler materials, such as ER5356 and ER4043, were used as consumable welding materials. For the welding conditions of the test specimen, welding frequencies of 2.5 and 4.5 Hz were applied using the SynchroPuls function, and the root faces were 1.0 and 1.5 mm. The mechanical properties of the MIG welds were determined through tensile, bending, and fatigue tests.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.163-164
• /
• 2022

Using the limestone powder as material that can substitute the clinker, it seems to get positive effect as filler and enhance workability of cement but the substitution amount and chemical properties of it can affect mechanical properties of cement. Thus, in this study, the effect limestone powder that has other properties on cement is evaluated. As a result, the workability enhancing effect was confirmed but deterioration of compressive strength was also checked. Later, with the view of workability, the experiment that the possibility of strength compensation by decreasing unit water weight of limestone powder cement is planned when the limestone powder is used.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.105-106
• /
• 2023

Using the limestone powder as material that can alternate the clinker, it seems to get positive effect as filler and enhance workability of cement, but the amount of replacement can affect compressive strength of cement. This study was evaluated the effect of limestone mixed cement fineness and SO₃ content on cement mortar. As a result of measuring the compressive strength, it showed 93% compared to the compressive strength of Plain 28 days at fineness 4,400 and SO₃ 2.6%. It is judged that additional research is necessary to express the strength equivalent to that of Plain.