• 대한소아치과학회지
• /
• 제36권1호
• /
• pp.62-70
• /
• 2009

본 연구는 최근 시판되고 있는 4종의 복합레진 Palfique Estelite $sigma^{{R}}$ (Tokuyama Dental Corp., Tokyo, Japan), $Z-350^{{R}}$ (3M ESPE, USA), Ceram X duo $E3^{{R}}$, Ceram X duo $D3^{{R}}$ (Dentsply, Konstanz, Germany)이 3가지 액체 환경에 노출될 때 시간에 따라 필러의 용출 양상이 변하는지 알아보고 이를 비교 분석하였다. 필러의 용출량을 평가하기 위해 내경 10mm, 두께 3mm인 테프론 몰드를 이용하여 시편을 제작하였다. 각각의 시편을 5ml의 0.1N NaOH 용액, 증류수, 인공타액이 담긴 폴리에틸렌 용기에 담구고 $37{\circ}C$ 오븐에서 보관하였다. Si, Ba의 용출량을 알아보기 위해 ICP-AE 기기를 이용하여 0.1N NaOH 용액에 담군 시편은 2주 후에, 증류수와 인공타액에 담군 시편은 1개월 간격으로 5회에 걸쳐 정량 분석하여 다음과 같은 결과를 얻었다. 1. 0.1N NaOH에서 필러의 용출량은 모든 시편에 대해서 유의하게 높았다 (p<.0.001). 2. 증류수에 저장하였을 때, Si 용출량은 Z-350가 가장 적고, 인공 타액에 저장하였을 때, Si 용출량은 Estelite에서 가장적었다. 3. 저장용액에 따른 원소의 용출량에서 모두 유의한 평균차이를 보였다(p<.0.001) 4. 인공타액에 저장된 시편이 증류수에 저장된 시편보다 시간이 증가할수록 Ba와 Si의 용출량이 더 많았다. 5. 저장기간에 따른 필러의 용출량은 저장 용액 간, 재료 간에 유의한 상관관계를 보였다(p<.0001). 이상을 통해 나노필러를 함유한 복합레진이 수분환경에 노출되었을 때 필러 입자들의 지속적인 용출이 일어남을 확인할 수 있었다.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.85-91
• /
• 2003

In this study, We have investigated leaching characteristics of heavy metals for recycled plastic composites containing EAF(Electric Arc Furnace) dust & EAF slag. EAF dust & EAF slag used that is generated in the 3 steel-making compaines in domestic. The physical and chemical properties of EAF dust & slag was examined by measuring specific surface area. porosity, oil absorption test and chemical wetting analysis etc. Results of total analysis indicated that EAF dust, slag contained significant amount of hazardous metals such as Cu, Pb, Cd and Cr. But, In the leaching test of the recycled plastic composites containing EAF dust, slag by Korean Standard Leaching Procedure, composites shows much lower leaching concentration of heavy metals. It was concluded that the recycled plastic composites containing EAF dust, slag showed good physical and chemical characteristics. This means that the EAF dust, slag can be effectively used as a functional filler.

• 한국재료학회지
• /
• 제21권9호
• /
• pp.502-508
• /
• 2011

The goal of the present work was to investigate the development of a geopolymeric ceramic material from a mixture of mine residue, coal fly ash, blast furnace slag, and alkali activator solution by the geopolymer technique. The results showed that the higher compressive strength of geopolymeric ceramic material increased with an increase in active filler (blast furnace slag + coal fly ash) contents and with a reduction of mine residue contents. The geopolymeric ceramic had very high early age strength. The compressive strength of the geopolymeric ceramic depended on the added active filler content. The maximum compressive strength of the geopolymeric ceramic containing 20 wt.% mine residue was 141.2 MPa. The compressive strength of geopolymeric ceramic manufactured by adding mine residue was higher than that of portland cement mortar, which is 60 MPa, when cured for 28 days. SEM observation showed the possibility of having amorphous aluminosilicate gel within geopolymeric ceramic. XRD patterns indicate that the geopolymeric ceramic was composed of amorphous aluminosilicate, calcite, quartz, and muscovite. The Korea Standard Leaching Test (KSLT) was used to determine the leaching potential of the geopolymeric ceramic. The amounts of heavy metals were noticeably reduced after the solidification of mine residue with active filler.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.205-210
• /
• 2000

This study concerns the cement-solidification. stabilization of the electric furnace dust. Compressive strength and leaching test of heavy metals were evaluated for varing types and ratios of cements and the effect of some additives of hauyne clinker and slag were also discussed. In this cases of using cement binders more than 30%, the compressive strength showed the values over 150kgf/cm2. so it can be used as filler for concrete precastings. Type III cement and Hauyne clinker improved the compressive strength, especially early strength. Leaching amount of heavy metals was decreased when using type III cement and adding hauyne clinker and slag. The values were especially low in the case of slag addition.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.56-64
• /
• 2019

금속을 함유하고 있는 산업폐자원과 관련한 재활용 기술을 개발하기 위해 다양한 접근이 시도되고 있으며, 그 중에서 유리는 미생물로 분해되지 않기 때문에 매립은 적합하지 않아 폐유리의 재활용에 대한 관심은 증대되고 있다. 따라서 본 논문에서는 폐유리를 잔골재로 사용하고 폐유리의 중금속 용출을 억제하기 위한 킬레이트 수지를 혼입함으로써, 차폐 채움재의 강도, 건조수축, 알칼리-실리카반응, 중금속 용출 등을 평가하여 폐유리를 경제적이며 환경 친화적인 차폐 채움재로서 활용하기 위한 기초자료를 제시하고자 한다. 시험결과, 폐유리를 잔골재로 사용하였을 경우 강도 발현에 효과적이었으며, 킬레이트 수지를 혼입하였을 경우 강도 발현에 영향이 있는 것으로 나타났다. 또한 킬레이트 수지를 혼입하였을 경우 건조수축의 개선에는 효과적이었으나 알칼리-실리카반응에 영향을 미치는 것으로 나타났다. 중금속 용출 시험결과, 한국 KSLP 시험법에서는 중금속 용출 허용 기준치를 모두 만족하였으나, 납의 경우 미국 ANSI 67-2007a의 허용 기준치를 초과하여 이에 대한 추가적인 연구가 진행되어야 할 것으로 판단되었다.

• 한국건설순환자원학회논문집
• /
• 제2권4호
• /
• pp.297-306
• /
• 2014

Recently nano-materials are gaining more importance in the construction industry due to its enhanced energy efficiency, durability, economy, and sustainability. Nano-silica addition to cement based materials can control the degradation of the fundamental calcium-silicate-hydrate reaction of concrete caused by calcium leaching in water as well as block water penetration and therefore lead to improvements in durability. In this paper, the influence of synthesized nano silica from locally available rice husk on the mechanical properties and corrosion resistant properties of OPC (Ordinary Portland Cement) has been studied by conducting various experimental investigations. Micro structural properties have been assessed by conducting Scanning Electron Microscopy, Thermo gravimetry and Differential Thermal Analysis, X-Ray Diffraction analysis, and FTIR studies. The experimental results revealed that NS reacted with calcium hydroxide crystals in the cement paste and produces Calcium Silicate Hydrate gel which enhanced the strength and acts as a filler which filled the nano pores present in concrete. Hence the strength and corrosion resistant properties were enhanced than the control.

• Advances in concrete construction
• /
• 제4권2호
• /
• pp.123-143
• /
• 2016

Use of heavy fuel fly ash (HFFA) (diesel and cracked fuel) for power generation in Saudi Arabia has generated and accumulated large quantities of HFFA as a byproduct. In this research, HFFA is studied with the emphasis on the utilization of this waste material in concrete blocks and asphalt concrete mixes. Two types of mixes, one with low and other with high cement content, were studied for concrete blocks. Different mixes having varying percentages of HFFA (0% to 25%), as cement/sand replacement or as an additive, were studied. The performance of concrete blocks is evaluated in terms of compressive strength, water absorption, durability and environmental concerns. The results showed that blocks cannot be cast if more than 15% HFFA is used; also there is a marginal reduction in the strength of all the mixes before and after being exposed to the sulfate solution for a period of ten months. HFFA is studied in asphalt concrete mixes in two ways, as an asphalt modifier (3&5%) and as a filler (50%) replacement, the results showed an improvement in stiffness and fatigue life of mixes. However, the stability and indirect tensile strength loss were found to be high as compared to the control mix due to moisture damage, indicating a need of using antistripping agents. On environmental concerns, it was found that most of the concerned elements are within acceptable limits also it is observed that lower concentration of barium is leached out with the higher HFFA concentrations, which indicates that HFFA may work as an adsorbent for this leaching element.

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.249-266
• /
• 2004

The purpose of this study was to determine whether pH and time has any influence on the degradation behavior of composite restoration by analyzing the leached monomers of dental composites qualitatively and quantitatively after storage in acetate buffer solution as a function of time using high performance liquid chromatography (HPLC) / mass spectrometer. Materials and Methods：Three commercial composite restorative resin materials (Z-250, Heliomolar and Aeliteflo) with different matrix structure and filler composition were studied. Thirty specimens (7mm $diameter{\times}2mm$ thick) of each material were prepared. The cured materials were stored in acetate buffer solution at different pH (4, 7) for 1, 7 and 45days. As a reference, samples of unpolymerized composite materials of each product were treated with methanol (10mg/ml). Identification of the various compounds was achieved by comparison of their mass spectra with those of reference compound, with literature data. and by their fragmentation patterns. Data were analysed statistically using ANOVA and Duncan's test. Results：1. Amounts of leached TEGDMA in Aeliteflo were significantly larger than those of UDMA in Z-250 and Heliomolar at experimental conditions of different storage time and pH variation (p<0.001). 2. As to comparison of the amounts of leached monomers per sorage time, amounts of leached TEGDMA in Aeliteflo and UDMA in Z-250 and Heliomolar were increased in the pH 4 solution more significantly than in the pH 7 solution after 1day, 7days and 45days, respectively (p<0.001). 3. In total amounts of all the leached monomers with storage times, the overall amounts of pH 4 extracts were larger than those of pH 7 extracts for all resin groups, but there was no significant difference (p>0.05).