• Elastomers and Composites
• /
• 제41권1호
• /
• pp.10-18
• /
• 2006

Maleic anhydride로 처리된 저분자량 폴리부타디엔 (액상 PB)이 실리카로 보강된 SBR 배합물의 특성에 미치는 영향을 연구하였다. 실리카 분산은 액상 PB의 첨가에 의해 향상되었다. Maleic anhydride가 포함된 액상 PB가 maleic anhydride가 포함되지 않은 액상 PB보다 실리카 분산성 향상에 더 효과적임을 알 수 있었다. SBR 배합물의 점도는 액상 PB가 첨가됨에 따라 감소하였다. 가교밀도는 액상 PB의 함량이 증가함에 따라 감소하였고 가황 속도는 느려졌다. 실험 결과를 고려하면, 5 phr 이하의 소량으로 액상 PB를 첨가함으로써 실리카로 보강된 SBR 배합물의 특성을 향상시킬 수 있을 것으로 사료된다.

• Steel and Composite Structures
• /
• 제47권5호
• /
• pp.615-631
• /
• 2023

Steel corrosion induces structural deterioration of concrete-filled steel tubes (CFSTs), and any potential extreme action on a corroded CFST would pose a severe threat. This paper presents a comprehensive investigation on the lateral impact behaviour of CFSTs suffering from localised pitting corrosion damage. A refined finite element analysis model is developed for the simulation of locally corroded CFSTs subjected to lateral impact loads, which takes into account the strain rate effects on concrete and steel materials as well as the random nature of corrosion pits, i.e., the distribution patterns and the geometric characteristics. Full-range nonlinear analysis on the lateral impact behaviour in terms of loading and deforming time-history relations, nonlinear material stresses, composite actions, and energy dissipations are presented for CFSTs with no corrosion, uniform corrosion and pitting corrosion, respectively. Localised pitting corrosion is found to pose a more severe deterioration on the lateral impact behaviour of CFSTs due to the plastic deformation concentration, the weakened confinement and the reduction in energy absorption capacity of the steel tube. An extended parametric study is then carried out to identify the influence of the key parameters on the lateral impact behaviour of CFSTs with localised pitting corrosion. Finally, simplified design methods considering the features of pitting corrosion are proposed to predict the dynamic flexural capacity of locally pitted CFSTs subjected to lateral impact loads, and reasonable accuracy is obtained.

• 자원리싸이클링
• /
• 제25권3호
• /
• pp.37-42
• /
• 2016

폐 젤리충진 케이블로부터 고순도 구리 와이어를 높은 회수율과 생산성으로 회수할 수 있는 친환경 공정을 개발하였다. 두 롤러(roller) 사이에 폐 케이블을 공급해주고 롤러의 밀착 압력이 외피(주로 polyethylene)의 인장강도 이상이 되면 자연스럽게 구리 심선과 외피로 분리되도록 한 단순한 기계적 방법만을 적용한 친환경 공정을 개발하였으며, 연속공정을 위한 세부 요소기술을 접목하고 이를 실험적으로 검증하였다. 연속공정을 통한 구리 와이어 평균 회수율은 98% 이상, 처리속도는 55 Kg/hr이었으며, 상업화 공정을 위한 진일보된 공정으로 평가될 수 있다.

• Elastomers and Composites
• /
• 제40권1호
• /
• pp.29-36
• /
• 2005

배합 조건과 공정은 충진제 분산, 점도, 결합고무 형성 등과 같은 고무 배합물의 특성에 영향을 준다. NBR과 SBR의 분리 첨가 배합이 NBR이 함유된 실리카로 보강된 고무 배합물의 특성에 미치는 영향에 대해 연구하였다. NBR 함량이 증가할수록 가교 시간과 속도는 빨라졌다. 가교밀도는 NBR 함량이 증가할수록 증가하였다. 결합고무량도 NBR 함량이 증가할수록 증가하였다. 결합 고무 중의 NBR 함량은 배합물 고무 중의 NBR 함량보다 높았다. 결합고무량은 동시첨가 배합의 경우보다 분리 첨가 배합의 경우 더 높았다. 가교 시간과 속도는 동시 첨가 배합의 경우보다 분리 첨가 배합때 더 느렸다. 가교밀도도 동시 첨가 배합의 경우보다 분리 첨가 배합의 경우 더 낮았다.

• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.320-324
• /
• 2002

Binary cure system is composed of different two cure accelerators, which can cause a synergy effect to delay the scorch time and to increase the cure rate. In this study, binary cure systems between 1,6-bis(N,N'-dibenzylthiocarbamoyldithio)-hexane (DBTH) and benzothiazole sulfenamides were investigated using carbon black-filled natural rubber compounds. N-Cyclohexyl-2-benzothiazole sulfenamide (CBS), N-tert-butyl-2-benzothiazole sulfenamide (TBBS), and 2-(morpholinothio) benzothiazole (MOR) were employed as benzothiazole sulfenamides. The binary cure systems show scorch safty at high temperature. The binary cure systems have faster cure rate and better reversion resistance than the single cure system of the benzothiazole sulfenamides. DBTH is found to be more effective to decrease the viscosity of a compound than the benzothiazole sulfenamides. Physical properties of the vulcanizates with the binary cure system are better than those of the vulcanizates with the single one.

• 수산해양기술연구
• /
• 제51권3호
• /
• pp.454-460
• /
• 2015

The present study is undertaken to evaluate the effect of volume fraction on the results of Charpy impact test for the rubber matrix filled with nano sized silica particles composites. The Charpy impact tests are conducted in the temperature range $0^{\circ}C$ and $-10^{\circ}C$. The range of volume fraction of silica particles tested are between 11% to 25%. The critical energy release rate $G_{IC}$ of the rubber matrix composites filled with nano sized silica particles is affected by silica volume fraction and it is shown that the value of $G_{IC}$ decreases as volume fraction increases. In regions close to the initial crack tip, fracture processes such as matrix deformation, silica particle debonding and delamination, and/or pull out between particles and matrix which is ascertained by SEM photographs of Charpy impact fracture surfaces.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.561-566
• /
• 2015

In this study, the effect of temperature effect of the rubber matrix filled with nano sized silica particles composites with silica volume fraction of 19-25% was investigated by the Charpy impact test. The Charpy impact test was conducted in the temperature range from $-40^{\circ}C$ to $0^{\circ}C$. The critical energy release rate GIC of the rubber matrix composites filled with nano sized silica particles was considerably affected by temperature and it was shown that the maximum value was appeared at higher temperature between temperature tested and it was shown that the value of GIC increases as temperature tested increases. The major fracture mechanisms were matrix deformation, silica particle debonding and delamination, microcrack between particles and matrix, and/or pull out between particles and matrix which is ascertained by SEM photographs of Charpy impact surfaces fracture.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.693-703
• /
• 2018

To better understand the influence of hollow ratio on the hollow concrete-filled circular steel tubular (H-CFT) stub columns under axial compression and to propose the design formula of ultimate bearing capacity for H-CFT stub columns, 3D finite element analysis and laboratory experiments were completed to obtain the load-deformation curves and the failure modes of H-CFT stub columns. The changes of the confinement effect between core concrete and steel tube with different hollow ratios were discussed based on the finite element results. The result shows that the axial stress of concrete and hoop stress of steel tube in H-CFT stub columns are decreased with the increase of hollow ratio. AfteGr the yield of steel, the reduction rate of longitudinal stress and the increase rate of circumferential stress for the steel tube slowed down. The confinement effect from steel tube on concrete also weakened slowly with the increase of hollow ratio. Based on the limit equilibrium method, a simplified formula of ultimate bearing capacity for the axially loaded H-CFT stub columns was proposed. The predicted results showed satisfactory agreement with the experimental and numerical results.

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.25-40
• /
• 1989

This study was conducted to evaluate the influence of 5 microfilled composite resin to fibroblast cultivated from human pulp (age 13). Each composite resin was manually mixed and filled in cylinder. Resin filled cylinders were placed in dishes (35mm in diameter) containing 3 ml of ${\alpha}$-MEM. Filters (pore size 0.22 ${\mu}m$) to simulate dentin were also placed between the bottom of cylinder and the dish floor. Then stored in 5% $CO_2$ containing incubator for 1 and 2 weeks at the temperature 36.6 C. The results analysed after 1 and 2 weeks were as follows: 1. Experimental group except group 2, 2 weeks incubation cases showed the cytotoxicity compared to the control group in cell count. 2. After 2 week-incubation of group 1 and group 4, cell count was more decreased than 1 week cases and cytotoxicity seemed to be constantly influenced to the cell multiplication. 3. The cell growth rate of 1 week incubation in group 3 and group 5 was similar to the control group and recognized the cytotoxicities of these groups were mild. 4. The cell multiplication rate of 2 week incubation cases in group 2 was greater than control group.

• 생물환경조절학회지
• /
• 제8권4호
• /
• pp.265-274
• /
• 1999

본 연구는 perlite를 이용한 오이의 양액재배시 적정 배지량과 근권용적을 구명하고자 용기의 크기가 2, 4, 6, 8 및 $10{\ell}$인 플라스틱 포트에 펄라이트를 채워 오이를 양액 재배하였다. 근권용적이 증가할수록 초장, 경경, 엽수 및 엽면적이 증가하였고, 과실수와 과실중량에서는 근권용적이 큰 $8{\ell}$ 와 $10{\ell}$ 의 처리구에서 가장 양호하였으며 기형과 발생률도 낮은 경향이었다. 근권용적을 $6{\ell}$ 이상으로 하였을 때 경으로의 건물분배가 줄어들고 엽으로의 건물분배가 많았다. NAR과 CGR은 근권용적이 증가함에 따라 증가하는 경향을 보였다. 관권용적에 관계없이 본 실험 범위내에서는 LAI가 증가할수록 NAR과 CGR도 증가하는 경향을 나타내었다.