• Child Health Nursing Research
• /
• 제11권4호
• /
• pp.390-395
• /
• 2005

Purpose: To investigate the effects of a warm water-filled bag on body temperature, Oxygen demand, respiratory rate and blood sugar in high risk neonates. Method: The infants were assigned to two groups, 16 in the experimental and 20 in the control group. Infants in the experimental group was received $40{\~}42^{\circ}C$ warm water-filled bag therapy for 2 hours under radiant warmers. Infants in the control group were placed under the same kind of radiant warmers but without the warm water-filled bag. The following were measured every 30 minutes: rectal temperature, $O_2$ demand ($FiO_2$), and respiratory rate. Blood sugar was measured hourly. Result: Body temperatures increased significantly in the experimental group (P=0.0138), and there was a difference according to time (P=0.0001). Significant difference were found between the two groups fur $FiO_2$ (P=0.0180). There was no difference in respiratory rates between the two groups and rates according to time for the experimental group were also not significant (P=0.3569). No significant difference between two groups was found for blood sugar (P=0.2152), but there was a significant difference according to the times (P=0.0001). Conclusion: This results of this study indicate that a warm-filled bag is an effective means of resorting body temperature and reducing $O_2$ demand in high risk neonates.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.431-437
• /
• 2019

논문은 유전체 볼 충진 배리어 방전 리액터를 이용하여 오존 생성 및 TCE 분해 특성에 대하여 논하였다. 오존 발생량은 $Al_2O_3$ 또는 $TiO_2$ 유전체 볼을 충진한 경우가 유전체 볼을 충진하지 않은 배리어 방전리액터에 비하여 크게 증가됨을 보였으며, 이러한 방전구조는 오존 생성량을 증가시키기에 적절한 것으로 판단되었다. 또한, TCE 분해효율과 COx 전환율은 $MnO_2$ 충진 방전리액터를 사용한 경우가 높았으며, 이것은 방전공간에 위치한 촉매 표면에서 오존 분해에 따른 화학반응에 기인된 것으로 파악되었다. 촉매 표면 화학반응을 파악하기 위하여 Al2O3 유전체 볼 충진 방전리액터와 촉매 리액터를 직렬로 배치하여 TCE 분해 효율이 100[%]에 도달하였음을 확인하였으며, $MnO_2$ 촉매는 오존 분해에 매우 좋은 재료이며, 이러한 오존 분해 촉매 반응을 이용하여 TCE와 같은 VOCs 분해에 유용하게 활용될 것으로 사료된다.

• 한국치위생학회지
• /
• 제11권6호
• /
• pp.923-938
• /
• 2011

Objectives : This study was attempted in order to grasp oral health level according to socio-demographic characteristics in elders in some communities, and to evaluate oral health status and its association. Methods : The subjects in this study were performed with 235 people, who were over 65 years and resided in Daejeon Province, from June 20 to July 10, 2011. An individual interview was held, and they got a dental checkup. As for data analysis, chi-square test, t-test, one-way ANOVA, pearson correlation were utilized. Methods : The subjects in this study were performed with 235 people, who were over 65 years and resided in Daejeon Province, from June 20 to July 10, 2011. An individual interview was held, and they got a dental checkup. As for data analysis, chi-square test, t-test, one-way ANOVA, pearson correlation were utilized. Results : The older age in the whole research subjects and the lower educational level led to the less remaining teeth and the larger missing teeth index. The decayed missing filled teeth index and the decayed missing filled teeth rate were higher in more women and older age and in the lower educational level. Tooth mortality rate was higher in the older age, the lower educational level, and the group of living together with spouse. The maxillary-mandibular fixed-bridge status in the mouth was indicated to be the highest in the full-denture mounting ratio as for elders in over 80 years old. Oral Health Impact Profile(OHIP-14) average score was $56.05{\pm}11.64$ in the whole research subjects The decayed missing filled teeth index and the decayed missing filled teeth rate showed significantly positive correlation with the decayed missing filled teeth rate, tooth mortality rate and showed significantly negative correlation with OHIP-14. Tooth mortality rate showed significantly negative correlation with OHIP-14 Oral Health Impact Profile(OHIP-14) showed significantly positive correlation with its factors. Conclusions : Accordingly, the policy effort is considered to be necessary that implements in elders in order to spend active senescence, and that elders' health and oral-health behavior can be implemented continuously and preventively through classification according to elders' physical function.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.92-99
• /
• 2001

Silica-filled rubber compounds have slower cure characteristics than carbon black-filled ones due to the adsorption of curatives on the silica surface. Fatty acid was used as a cure activator along with zinc oxide in a sulfur cure system. Poly(ethylene glycol), PEG, was used in silica-filled rubber compounds to prevent adsorption of the curatives on the silica surface. In this study, influence of the size of fatty acid and PEG on properties of silica-filled NR compounds was investigated. It was found that the size of fatty acid and PEG affected the curt: characteristics and physical properties. The cure rate becomes faster as the PEG size increases. By increasing the size of fatty acid or PEG, the delta torque of the compound decreases while the Mooney viscosity increases. The modulus of the vulcanizate decreases with increasing the molecular weight of fatty acid or PEG. The experimental results were explained by the filler dispersion and by the prevention of the curative-adsorption on the silica surface.

• Journal of information and communication convergence engineering
• /
• 제20권3호
• /
• pp.153-159
• /
• 2022

Plain radiographic analysis is the initial imaging modality for suspected small bowel obstruction. Among the many features that affect the diagnosis of small bowel obstruction (SBO), the presence of gas-filled or fluid-filled small bowel loops is the most salient feature that can be automatized by computer vision algorithms. In this study, we compare three frequently applied pixel-clustering algorithms for extracting gas-filled areas without human intervention. In a comparison involving 40 suspected SBO cases, the Possibilistic C-Means and Fuzzy C-Means algorithms exhibited initialization-sensitivity problems and difficulties coping with low intensity contrast, achieving low 72.5% and 85% success rates in extraction. The Adaptive Resonance Theory 2 algorithm is the most suitable algorithm for gas-filled region detection, achieving a 100% success rate on 40 tested images, largely owing to its dynamic control of the number of clusters.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.382-392
• /
• 1990

This study investigates the behavior of fatigue crack propagating between holes of holes filled with another materials. When holes of the holes filled with another materials are located symmetrically near a center crack, it is noted that the crack propagation rate is influenced by both the bonding force of the brazing part and the elastic modulus of another material. It is experimentally and analytically confirmed that the center crack stops when its tip reaches near the center line of the holes and a small crack is initiated from the boundaries of holes of the holes filled with another materials and it propagates to final fracture.

• Journal of Radiation Protection and Research
• /
• 제34권3호
• /
• pp.144-150
• /
• 2009

This study examines how much the radiation dose rate around it varies if a crack occurs on the spent nuclear fuel rod. The spent nuclear fuel rod to be examined is that of Kori unit 3&4. The source terms are evaluated using the ORIGEN-ARP that is part of the version 5.1 of the SCALE package. The radiation dose rate is assessed using the TORT. To check if the structure of a fuel rod is appropriately modeled in the TORT calculation, the calculation results by the TORT are compared with those by the ANISN for the same case. From the code simulation, it is known that if a crack occurs on the spent nuclear fuel rod, the neutron dose rate varies depending on what material is the crack filled with, but the gamma dose rate varies irrespective of type of the material that the crack is filled with.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3135-3141
• /
• 2013

본 연구에서는 유한요소해석과 다구찌 방법을 통해 높은 토크 저항력과 결합력을 갖는 클린치 스터드를 설계할 때 이에 영향을 미치는 설계 변수들의 적합한 조건을 도출하였다. 목적함수로 최대성형하중과 소재의 충만율을 고려하였으며 설계변수로 홈 높이, 로브 직경, 로브 높이 그리고 홈 깊이를 선정하였고 이들 제어인자와 마찰을 잡음인자로 하여 직교배열표를 조합하고 실험횟수별 유한요소해석을 통해 성형하중과 충만율을 평가하였다. 그리고 다구찌 방법의 S/N비를 이용하여 시뮬레이션결과를 해석하였고, 이들 해석결과로부터 최적의 조합조건을 제안하였다. 충만율에 가장 큰 영향을 주는 인자는 로브 높이, 홈 높이, 로브 직경 그리고 홈 깊이 순 임을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.30-33
• /
• 1994

This paper studies on the effect of DSC(Differential Scanning Calorimeter) analysis condition on the glass transition temperature of silica filled epoxy network polymer used for ultra-high voltage apparatus. The effects of temperature scanning rate specimen size and gas flow rate on measured glass transition temperature have been studied in order to select optimum thermal analysis condition.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.141-144
• /
• 2006

In this study, the friction and wear characteristics of pure epoxy and silica-filled epoxy resin composites with average silica particle diameter of $6-33{\mu}m$ were investigated at ambient temperature by pin-on-disc friction test. The cumulative wear volume, friction coefficient and wear rate of these materials against SiC abrasive paper were determined experimentally. The cumulative wear volume tended to increase nonlinearly with increase of sliding distance and depended on diameter of the silica particle for all these composites. The sliding wear tests of the materials demonstrated that the friction coefficient and the wear rate of silica filled epoxy composites were lower than those of the pure epoxy. silica filled epoxy.