• 유기물자원화
• /
• 제20권3호
• /
• pp.71-82
• /
• 2012

국내에서 퇴비화 첨가제로 주로 사용되는 재료로는 톱밥과 목편(woodchip)으로서, 이들 첨가제는 주로 적정 수분함량 및 C/N비의 조절에 주안점을 주고 사용되고 있다. 하지만 톱밥과 목편(woodchip)은 서로 상이한 물리적 특성을 나타내고 있으며, 첨가제의 공기투과성에 대한 연구는 활발히 이루어지지 못하고 있다. 본 연구에서는 퇴비화 첨가제로 주로 사용되고 있는 톱밥과 목편(woodchip)의 혼합비율에 따라 용적 밀도, 수분함량, 공기공극, 입자크기, 공기유속 등이 공기투과성에 미치는 영향을 파악하였다. 모든 첨가제에서 수분함량이 증가함에 따라 공기공극율은 감소하고 입자크기는 증가하였으며, 특히 목편의 혼합비율이 높아짐에 따라 이러한 효과는 더욱 증대되는 경향을 나타내었다. 공기공극율과 수분함량은 선형의 관계로서 공기투과성에 미치는 영향은 매우 유사하게 나타났다. 건조수분함량 0.25~0.43(d.b.)(습윤수분함량으로는 20~30%) 이후의 구간에서는 공기공극율이 낮아짐에도 불구하고 압력손실이 감소함으로써 공기투과성이 개선되는 현상을 보이고 있다. 특히 입자크기가 5 mm로 커질 때까지 압력손실은 지수적으로 감소하여 공기투과성이 현저히 개선되고 있다. 이는 수분함량 증가에 따라 미세입자가 입단화됨으로써 대공극이 증가하고 이에 따라 공기이동성이 원활해 졌기 때문으로 여겨진다. 따라서 첨가제의 입자크기가 공기공극율이나 수분함량에 비하여 공기투과성에 미치는 영향이 매우 높았으며, 퇴비화시에는 초기 입자크기를 5 mm 이상으로 조절하는 것이 적합하다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권3호
• /
• pp.35-48
• /
• 2016

A micromodel was applied to estimate the effects of geological conditions and injection methods on displacement of resident porewater by injecting scCO₂ in the pore scale. Binary images from image analysis were used to distinguish scCO₂-filled-pores from other pore structure. CO₂ flooding followed by porewater displacement, fingering migration, preferential flow and bypassing were observed during scCO₂ injection experiments. Effects of pressure, temperature, salinity, flow rate, and injection methods on storage efficiency in micromodels were represented and examined in terms of areal displacement efficiency. The measurements revealed that the areal displacement efficiency at equilibrium decreases as the salinity increases, whereas it increases as the pressure and temperature increases. It may result from that the overburden pressure and porewater salinity can affect the CO₂ solubility in water and the hydrophilicity of silica surfaces, while the neighboring temperature has a significant effect on viscosity of scCO₂. Increased flow rate could create more preferential flow paths and decrease the areal displacement efficiency. Compared to the continuous injection of scCO₂, the pulse-type injection reduced the probability for occurrence of fingering, subsequently preferential flow paths, and recorded higher areal displacement efficiency. More detailed explanation may need further studies based on closer experimental observations.

• 보존과학회지
• /
• 제26권4호
• /
• pp.361-370
• /
• 2010

Gameunsaji West Stone Pagoda;Filler;Consolidation;Pore;Injection;Materials; 석조문화재의 내부공극은 강화처리만으로 효과를 보기 어렵고 고분자합성수지를 이용한 충전의 경우 재료적 이질감과 높은 강도, 저점도에 따른 유동성 향상으로 내부벽면만 접착, 강화되는 단점이 있다. 따라서 본 연구는 무기질 바탕의 다양한 충전제를 검색하여 충전효과검증을 통해 감은사지삼층석탑 공극부 충전에 효과적인 충전제를 선정, 보존처리를 실시하였다. 충전실험 결과 부재와 동일하거나 매우 유사한 물성을 지닌 KSE 500 STE + KSE Filler A KSE Filler B 조합을 사용하여 충전하였다. 서탑 전체표면적은 $252.6m^2$이며 이중 내부공극이 발달한 부분은 $17.77m^2$(7.03%)로 내부를 충전($24,885m{\ell}$)하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.143-149
• /
• 2020

본 연구에서는 금속 적층 제조로 출력한 격자 구조체의 내부 공극에 반응성 아크릴 화합물을 충진시켜, 밀도 제어가 가능한 밀실 복합 격자 구조체를 제작하는 것을 목표로 한다. 또한 본 격자 구조체를 건설분야에 적용하기 위하여 반응성 아클릴 화합물에 보통 포틀랜드 시멘트를 첨가함으로써 콘크리트와의 부착성능을 향상시킨 부착력 증진 반응성 아크릴 화합물을 검토하였다. 최종적으로 제조한 부착력 증진 반응성 아크릴 화합물을 격자 구조체 내부에 충진하여 밀도 제어형 기능성 복합 격자 구조체(Hybrid Lattice structure)의 비중, 흡수율 및 부착강도를 검토하였다. 그 결과, 밀도 제어 가능, 흡수율 1.0 % 이하 및 재령 1일 부착강도 1.78 MPa ~ 1.98 MPa의 결과물을 도출하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제26권1호
• /
• pp.1-7
• /
• 2021

Air-water interfacial area is of great importance for the analysis of contaminant mass transfer processes occurring in the soil systems. Capillary bundle model has been proposed to estimate the specific air-water interfacial areas in unsaturated soils. In this study, the measured air-water interfacial areas of a soil (loam) using the gaseous interfacial tracer technique were compared to those from capillary bundle model. The measured values converged to the specific solid surface area (7.6×104 ㎠/㎤) of the soil. However, the simulated air-water interfacial areas based on the capillary bundle model deviated significantly from those measured. The simulated values were substantially over-estimated at low end of the water content range, whereas the model under-estimated the air-water interfacial area for the most of the water content range. This under-estimation is considered to be caused by the nature of the capillary bundle model that replaces the soil pores with a bundle of glass capillaries and thus no surface roughness at the inner surface of the capillaries is taken into account for the estimation of the air-water interfacial area with the capillary bundle model. Subsequently, appropriate correction is necessary for the capillary bundle model to estimate the air-water interfacial area in soils. Since the soil-moisture release curve data is the basis of the capillary bundle model, the model can be of use due to its simplicity, while the gaseous tracer technique requires complicated experimental equipment followed by moment analysis of the breakthrough curves. The size distribution profile of the pores filled with gas estimated by the water retention curve was found to be similar to that of particle size at different size range. The shifted distribution of gas-filled pores toward smaller size side compared to the particle size distribution was also found.

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.905-911
• /
• 1992

Model equations for the gas permeation through a ceramic composite membrane were derived for examining the existence of crack, the reproducibility, and the microstructural properties of composite membranes. From the results of analyzing the nitrogen permeability data through alumina-tube supported TiO2 and SiO2 composite membranes, the extent of cracking, and the formation and structure of membrane top-layers were modelled. It was proved that the crack-free and reproducible composite membranes could be easily prepared only by the pore-filled coating within pores of the support in the sol-gel coating process.

• 한국가구학회지
• /
• 제21권5호
• /
• pp.354-366
• /
• 2010

The modern unique woodworking furniture has been made in earnest from 50 years ago. Some oil from nut such as soybean, walnut and perilla, which is usually used in our common life, has been used as finishing material for the unique woodworking furniture. Recently, woodworking studio business among the whole furniture industry has grown gradually and many woodworkers uses various kinds of imported wood finishing oil. Many woodworkers use the imported finishing oil in the old ways instead of understanding the characters of the various kind of oil and It causes some serious problems in furniture finishing process. Therefore, this study aims at taking theoretical approach in wood finishing oil and presenting correct usage in understanding the types and characters of oil. Resultingly the new method of oil finishing for wood is suggested and this suggestion is to guide woodworkers into the right usage of wood finishing oil.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.735-738
• /
• 2003

고주파용 회로기판으로 사용하는 PTFE 복합체를 woven glass fiber를 사용하여 제조하였다. 유전상수는 PTFE 분산액에 woven glass fiber를 함침하는 횟수 증가에 따라 감소하는 특성을 나타내었으며, 3회 함침 횟수부터는 변화율이 감소하였는데, 이것은 PTFE 미세분말이 woven glass fiber의 기공과 굴곡 사이를 충분히 채우기 때문이다. 또한 함침 횟수 증가에 따라 PTFE의 비율이 증가하면서 유전 상수가 감소하여 회로 기판의 전파 전송속도는 증가하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.540-543
• /
• 2003

There are many stone monuments which are weathered by natural or artificial factors in Korea. The partly weathering in stone could accelerate the rate of weathering, so it is demanded to keep them from the further weathering. Consolidation is evaluated as one of the efficient treatments which have a good effectiveness in stone monuments. But following the former researches, the effectiveness of consolidation could be different, related to the kinds of stone or consolidants. Therefore, in this study, the change of properties was monitored in the long term for the exact evaluation of the stability of the consolidated stone. It is estimated that the pore structure of consolidated stone was filled by consolidant, according to the measurements of ultrasonic velocity, and the digital image analysis of the sample was shown that the color property of stone surface has varied during the curing.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권2호
• /
• pp.175-183
• /
• 2016

A poroelastic composite material, containing different material phases and filled with fluids, serves as a model to formulate the overall ablative behaviors of such materials. This article deals with the assessment of variation in nondeterministic poroelastic properties of two-phase composite materials using micromechanical representative volume element (RVE) models. Considering the configuration and arrangement of pores in a matrix phase, various RVEs are modeled and analyzed according to their porosity. In order to quantitatively investigate the effects of microstructure, changes in effective elastic moduli and poroelastic parameters are measured via finite element (FE) analysis. The poroelastic parameters are calculated from the effective elastic moduli and the pore-pressure-induced strains. The reliability of the numerical results is verified through image-based FE models with the actual shape of pores in carbon-phenolic ablative materials. Additionally, the variation of strain energy density is measured, which can possibly be used to evaluate microstress concentrations.