• 한국지반환경공학회 논문집
• /
• 제20권1호
• /
• pp.19-25
• /
• 2019

본 연구에서는 무선 센서 네트워크 시스템을 이용한 저수지 댐 시설물 전체의 모니터링 시스템의 적용성을 평가하고자 국내의 저수지 댐을 대표할 수 있는 구간을 시범구축 현장으로 선정해, 계측과 동시에 시설물의 상태를 평가할 수 있는 시스템을 구축, 운영하였다. 무선 센서 네트워크 구축을 위해 시설물의 현재 상태를 평가하여 위험인자를 도출함과 동시에 극한상태에서의 위험인자의 한계값을 도출하였다. 위험구역, 위험인자에 적합한 측정항목을 설정하여 현장에서 측정할 센서의 종류 그리고 위치를 결정하였다. 국내의 저수지 댐을 대표할 수 있는 필댐을 대상으로 현장에서 무선 센서 네트워크 시스템을 구축하여 모니터링 함으로써 시스템의 적용성을 평가하였으며, 현재 댐의 계측관리 기술인 부분 집중방식의 계측과 직접 비교함으로써 시스템의 적용성을 검증하였다.

• 한국재료학회지
• /
• 제29권5호
• /
• pp.282-287
• /
• 2019

The photovoltaic properties of $TiO_2$ used for the electron transport layer in perovskite solar cells(PSCs) are compared according to the particle size. The PSCs are fabricated and prepared by employing 20 nm and 30 nm $TiO_2$ as well as a 1:1 mixture of these particles. To analyze the microstructure and pores of each $TiO_2$ layer, a field emission scanning electron microscope and the Brunauer-Emmett-Teller(BET) method are used. The absorbance and photovoltaic characteristic of the PSC device are examined over time using ultraviolet-visible-near-infrared spectroscopy and a solar simulator. The microstructural analysis shows that the $TiO_2$ shape and layer thicknesses are all similar, and the BET analysis results demonstrate that the size of $TiO_2$ and in surface pore size is very small. The results of the photovoltaic characterization show that the mean absorbance is similar, in a range of about 400-800 nm. However, the device employing 30 nm $TiO_2$ demonstrates the highest energy conversion efficiency(ECE) of 15.07 %. Furthermore, it is determined that all the ECEs decrease over time for the devices employing the respective types of $TiO_2$. Such differences in ECE based on particle size are due to differences in fill factor, which changes because of changes in interfacial resistance during electron movement owing to differences in the $TiO_2$ particle size, which is explained by a one-dimensional model of the electron path through various $TiO_2$ particles.

• 한국환경복원기술학회지
• /
• 제22권5호
• /
• pp.45-56
• /
• 2019

Urban green areas are generally composed of relatively small and fragmented patches, but it is a critical factor for the quality of an urban environment. They have positive effects such as increasing green connectivity, reducing runoff, and mitigating urban heat. But, there is a lack of urban greening plans that consider the comprehensive effects of green space in real urban areas. To fill this gap in this literature, this study identifies a planning model that determines the optimal locations for maximizing green areas' multiple effects(e.g., heat mitigation and enhancement of connectivity) by using unused lots. This model also considers minimizing costs using meta-heuristic optimization algorithms. As a results, we finds 50 optimal plans that considers two effects within the limited cost in Nowon-gu. The optimal plans show the trade-off effect between connectivity, heat mitigation and cost. They also show the critical unused land lots for urban greening that are commonly selected in various plans. These optimal plans can effectively inform quantitative effectiveness of green space and their trade-off. We expect that our model will contribute to the improvement of green planning processes in reality.

• 한국광학회지
• /
• 제33권6호
• /
• pp.245-251
• /
• 2022

타일형 결맞음 빔결합 연구를 위하여 시드 공유형 다채널 광섬유 레이저 및 출력단, 다중 빔 정렬 기술을 개발하였다. 광섬유 레이저는 7개의 채널을 갖고, 각각의 채널당 출력 10 W 이상으로 시드, 전치 증폭기, 광 분배기, 주 증폭기로 구성된 master oscillator power amplifier 구조이다. 레이저 빔 시준 및 정렬을 위하여 틸팅 기능이 가능한 출력단을 개발하였다. 출력단은 채움값을 높이기 위하여 원통형 구조로 제작하였으며, 광섬유 엔드캡의 결합이 가능하게 하였고, 출력단 내부에 PZT를 장착하여 틸팅 기능을 구현하였다. 다중 채널 레이저의 각 채널 빔을 표적의 한 점으로 정렬하기 위하여 stochastic parallel gradient decent (SPGD) 알고리즘을 적용하였다. SPGD 알고리즘을 이용한 PZT 제어를 통해 다중 빔 정렬을 성공적으로 구현하였다. 다중 빔 정렬 기술을 이용한 결맞음 빔결합 기술 개발이 기대된다.

• Journal of Oral Medicine and Pain
• /
• 제45권4호
• /
• pp.97-109
• /
• 2020

Purpose: Cervicogenic headache (CGH) is pain referred to the head/ face from the structures in vicinity of upper cervical spinal nerves via trigeminocervical pathway. Ponticulus Posticus (PP) and Elongated Styloid Process (ESP) are anatomical structures that cause compression of vasculature present around upper cervical nerve plexus. Recently, computational fluid dynamics (CFD) has shown to play an essential role in identification of these high-pressure zones in the brain. The aim of this research is to study the association of ESP and PP in patients with CGH and to develop a hypothesis by CFD to analyse vertebrobasilar insufficiency as a contributing factor in occurrence of CGH. Methods: Retrospective analysis of 4500 full skull CBCT scans was done for the presence of partial or complete PP and length of Styloid Process (SP). Research was divided into two phases; In first Preliminary Phase, 150 scans that showed the presence of PP and ESP were analysed, and only 134 patients gave consent to fill the questionnaire containing 96 question items pertaining to symptoms associated with CGH. In the second phase, simulation of Vertebral and Carotid Artery was done using Fluent 14.5 Software and by CFD, pressure distribution on arteries was obtained that helped to identify high pressure regions. Results: Both PP and ESP showed a statistically significant association with CGH (p<0.001). By CFD analysis, both steady and transient phases of simulation showed drop in pressure due to constriction of internal carotid and vertebral artery by ESP and PP respectively and were found to decrease the volume of blood reaching the brain, 0.12 /0.13 mL and 0.06 mL respectively. Conclusions: Our analysis proves ESP and PP as contributing factors towards CGH. Hence for proper diagnosis and management of headache disorders, clinicians should have adequate knowledge about these anatomical structures and their resulting clinical symptoms.

• Current Photovoltaic Research
• /
• 제9권1호
• /
• pp.1-5
• /
• 2021

The properties of the electron transport layer (ETL) have a great effect on perovskite solar cell performance. Depositing conformal SnO2 ETL on bottom textured silicon cells is essential to increase current density in terms of the silicon-perovskite tandem solar cells. In the recent study, the SnO2 electron transport layer deposited by the sputtering method showed an efficiency of 19.8%. Also, an electron transport layer with a sputtered TiO2 electron transport layer in a 4-terminal tandem solar cell has been reported. In this study, we synthesized SnOx ETL with a various sputtering power range of 30-60W by Radio-frequency (RF)-magnetron sputtering. The properties of SnOx thin film were characterized using ellipsometer, UV-vis spectrometer, and IV measurement. With a sputtering power of 50W, the solar cell showed the highest efficiency of 13.3%, because of the highest fill factor by the conductivity of SnOx film.

• Journal of Yeungnam Medical Science
• /
• 제39권4호
• /
• pp.322-331
• /
• 2022

Background: The combined use of biomaterials for regeneration may have great biological relevance. This study aimed to compare the regenerative potential of biphasic calcium phosphate (BCP) alone and with growth factor enamel matrix derivatives (EMDs) for the regeneration of intrabony defects at 1 year. Methods: This randomized controlled trial included 40 sites in 29 patients with stage II/III periodontitis and 2/3 wall intrabony defects that were treated with BCP alone (control group) or a combination of BCP and EMD (test group). BCP alloplastic bone grafts provide better bio-absorbability and accelerate bone formation. EMDs are commercially available amelogenins. Mean values and standard deviations were calculated for the following parameters: plaque index (PI), papillary bleeding index (PBI), vertical probing pocket depth (V-PPD), vertical clinical attachment level (V-CAL), and radiographic defect depth (RDD). Student paired and unpaired t-tests were used to compare the data from baseline to 12 months for each group and between the groups, respectively. The results were considered statistically significant at p<0.05. Results: At 12 months, the PI and PBI scores of the control and test groups were not significantly different (p>0.05). The mean V-PPD difference, V-CAL gain, and RDD difference were statistically significant in both groups at 12 months (p<0.001 for all parameters). Intergroup comparisons showed that the mean V-PPD reduction (2.13±1.35 mm), V-CAL gain (2.53±1.2 mm), and RDD fill (1.33±1.0 mm) were statistically significant between the groups at 12 months (p<0.001 for all parameters). Conclusion: BCP and EMDs combination is a promising modality for the regeneration of intrabony defects.

• Current Photovoltaic Research
• /
• 제10권2호
• /
• pp.33-38
• /
• 2022

Planner configuration thin film solar cells (TFSCs) with SnS/CdS heterojunction performed a lower short-circuit current (J_SC). In this study, we have demonstrated a path to overcome deficiency in J_SC by the incorporation of Se in the SnS absorber. We carried out the incorporation of Se in VTD grown SnS absorber by rapid thermal annealing (RTA). The diffusion of Se is mostly governed by RTA temperature (T_RTA), also it is observed that film structure changes from cube-like to plate-like structure with T_RTA. The maximum J_SC of 23.1 mA cm^-2 was observed for 400℃ with an open-circuit voltage (V_OC) of 0.140 V for the same temperature. The highest performance of 2.21% with J_SC of 18.6 mA cm^-2, V_OC of 0.290 V, and fill factor (FF) of 40.9% is observed for a T_RTA of 300℃. In the end, we compare the device performance of Se- incorporated SnS absorber with pristine SnS absorber material, increment in J_SC is approximately 80% while a loss in V_OC of about 20% has been observed.

• 한국산림과학회지
• /
• 제89권2호
• /
• pp.275-284
• /
• 2000

본 연구는 집중호우로 인하여 임도사면의 붕괴가 발생된 변성암지역 및 화성암지역의 임도를 대상으로 성토사면의 토질역학적 특성파악과 사면안정해석을 실시하였다. 그 결과는 다음과 같다. 1) 통일분류법에 의한 임도성토사면의 토질의 분류는 화성암과 변성암지역 모두 토사사면은 SW, 풍화암사면은 SP, 연암사면은 GP로 나타났으나, 호박돌 섞인 토사사면에서는 화성암지역은 SP, 변성암지역은 GW로 나다났다. 2) 화성암지역의 성토사면 흙의 건조말도는 $1.34g/cm^2{\sim}1.59g/cm^2$, 비중은 2.57~2.61, 간극비는 0.66~0.93으로 나타났고, 변성암지역의 흙의 건조밀도는 $1.35g/cm^2{\sim}1.51g/cm^2$, 비중은 2.67~2.77, 간극비는 O.78~1.01로 나타났다. 3) 흙의 강도정수인 내부마찰각과 점착력의 시험결과, 화성암지역에서의 내부마찰각은 $29.51^{\circ}{\sim}41.82^{\circ}$ 점착력은 $0.03kg/cm^2{\sim}0.38kg/cm^2$, 변성암지역에서의 내부마찰각은 $21.43^{\circ}{\sim}41.43^{\circ}$, 점착력은 $0.05kg/cm^2{\sim}0.44kg/cm^2$로 나타났다. 4) 사면안정해석을 실시한 결과 안전율은 전체적으로 화성암지역의 경우에는 풍화암사면, 변성암지역의 경우에는 토사사면과 풍화암사면이 1 이하로 붕괴발생위험이 가장 큰 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• 제44권2호
• /
• pp.179-186
• /
• 2006

$TiO_2$를 나노튜브(nanotube)와 나노입자(nanoparticle)의 두 가지 형태로 제조하여 닥터 브레이드 방법과 $450^{\circ}C$에서의 소결 공정을 통하여 다공성막으로 제조하였다. 이 다공성막을 작용물질로 사용하여 염료감응형 태양전지를 제조하고 그 특성을 조사하였다. $TiO_2$ 나노입자는 수소화 티탄염 나노튜브를 $180^{\circ}C$에서 24시간 동안 가수열분해 처리함으로써 합성하였다. 이 $TiO_2$ 나노입자를 다공성막으로 사용하여 제작한 염료감응형 태양전지의 에너지 효율(${\eta}$)은 8.07％이며, 개방전압(open-circuit potential, $V_{OC}$), 단락전류(short-circuit current, $I_{SC}$)와 fill factor(FF) 값은 각각 0.81 V, $18.29mV/cm^2$와 66.95％이었다. 나노튜브 $TiO_2$를 제조할 경우에는 NaOH 용액의 농도를 3M과 5M로 변화시켰다. 그 결과 3M NaOH 용액에서 합성된 나노튜브 $TiO_2$를 다공성막으로 사용하여 제작된 염료감응형 태양전지의 에너지 효율(${\eta}$)은 6.19％이었으며, $V_{OC}$, $IV_{SC}$와 FF 값은 각각 0.77 V, $12.41mV/cm^2$와 64.49％이었다. 반면에 5 M NaOH에서는 전자이동성이 좋지 않아 효율이 4.09％로 감소하였다. 본 연구 결과 가수열분해법에 의해 제조한 $TiO_2$ 나노입자로 제조한 염료감응형 태양전지의 효율이 가장 높았다.