• Elastomers and Composites
• /
• 제26권4호
• /
• pp.287-295
• /
• 1991

The mixing process with carbon black is important in the rubber industries. However, it is difficult to characterize the mixing mechanism of the carbon black. The mixing mechanism(distributive mixing and dispersive mixing) was discribed in this paper. The effect of fill factor on the mixing of the carbon black was studied. The dispersive mixing ability increases with increasing fill factor. However, the distributive mixing ability decreases with increasing fill factor. The effect of the carbon black content on the rheological property of the material was studied in this paper. The viscosity of the material increases with increasing the carbon black content. However, the elasticity of the matarial decreases with the carbon black content.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.235-235
• /
• 2013

We reported on the characteristics of organic solar cells (OSCs) fabricated on $HNO_3$-treated multilayer graphene (MLG) transparent electrodes. MLG electrodes were prepared using a chemical vapor deposition and a multi-transfer process. Compared to organic solar cells (OSCs) on the ITO electrodes had a fill factor of 65.97%, and a power conversion efficiency (PCE) of 3.364%, OSCs on the MLG (three-layer graphene) electrodes with sheet resistance of $274{\pm}1{\Omega}$/square and transparency of 92.1% had a fill factor of 43.46%, and a power conversion efficiency (PCE) of 2.019%. However, OSCs on the HNO3-treated MLG electrodes with lower sheet resistance of $119{\pm}1{\Omega}$/square had a fill factor of 57.54%, and a PCE of 2.861%. The results would provide a promising method to improve the performance of large-area OSCs based on MLG electrodes.

• 산업기술연구
• /
• 제32권A호
• /
• pp.109-114
• /
• 2012

In this paper, We studied LED(Light Emitted Diode) sensor lights system using PIR(Pyroelectric Infrared Ray) sensor, CdS and MCU(Micro Controller Unit). And applied the valley fill circuit to improve the power factor. We designed the amplifier for each sensor and the LED driver for constant current which is the buck converter. Also, we proposed the algorithm of LED control by each sensors using MCU. Experimental results showed that power factor is 92% with valley fill circuit.

• 대한산업공학회지
• /
• 제29권1호
• /
• pp.78-89
• /
• 2003

Ordering is performed to reduce the amount of fill-ins of the Cholesky factor of a symmetric positive definite matrix. This paper proposes a new ordering algorithm that reduces the fill-ins of the Cholesky factor iteratively by elimination tree rotations and clique separators. Elimination tree rotations have been used mainly to reorder the rows of the permuted matrix for the efficiency of storage space management or parallel processing, etc. In the proposed algorithm, however, they are repeatedly performed to reduce the fill-ins of the Cholesky factor. In addition, we presents a simple method for finding a minimal node separator between arbitrary two nodes of a chordal graph. The proposed reordering procedure using clique separators enables us to obtain another order of rows of which the number of till-ins decreases strictly.

• 한국농공학회논문집
• /
• 제47권4호
• /
• pp.53-61
• /
• 2005

A series of laboratory tests was carried out fur analyzing of seepage characteristics of two-layers embankment model which consists of gravel and earth fill layers. Gravel layers were built under the earth fill for a half and one-third width of earth fill of the model. Permeability of earth fill was ranged between $5.00\times10^{-5}\~3.00\times10^{-4}\;m/s$.. The tests were performed with hydraulic gradients(i), $0.10\~0.55$. From the test results, hydraulic head of earth fill with gravel layer was 1.6 times higher than that of earth fill without gravel layer. Seepage rate was increased up to $4\~22$ times and safety factor for piping was decreased to $13\~43\;\%$ comparing the earth fill with gravel layer to that without gravel layer. The gravel layer under the earth fill could, in general, give some serious seepage problems to seadike embankment.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.428-430
• /
• 2008

Dye-sensitized solar cell has many internal resistant components such as Pt counter electrode, $TiO_2$/dye/electrolyte, charge diffusion, sheet resistance of TCO. Among these, the resistance about the counter electrode can be reduced by increasing the roughness factor of Pt counter electrode. This causes the increase of fill factor and improvement of efficiency. And the amount of light reflection on the counter electrode also increases as the roughness factor goes up. In our experiment, we suggest a new deposition structure of Pt thin film that is a stepped-type structure. The more step lines are in the counter electrode, the more roughness factor is. As a result, we get the improvement of fill factor and efficiency by controlling the roughness factor of counter electrode.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.842-853
• /
• 2008

In the construction of dam, the key factor which decides the type of dam is security of materials resource. Because of the large scale earth work, the ability to supply the materials is essential part about economical efficiency. The research is the case study about controlling the plan to secure the material resources in the design of Buhang multipurpose dam. In case of Buhang multipurpose dam, at that time of basic design, it was planned to use a rock fill material. From the detail investigation about the river bed accumulative layer widely spread on the submerged district on the basic design, the research is accomplished to replace rock material with gravel material. After the investigation of whole reserves of gravel material, estimation of conformity as dam construction material from analysis of grain size distribution, the case study of oversea construction, and the material property comparison between rock fill material and gravel fill material, it is verified th possibility of using the gravel fill. Thereafter, the analysis of dam stability using a gravel fill material is accomplished. Finally, A gravel fill material can be used as the main construction material of CFRD, therefore the efficiency of resource recycling in the submerged area is maximized, and the established plan is more advantageous to stability, constructibility, environmentibility than the case of using a rock fill.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권6호
• /
• pp.520-526
• /
• 1994

A rectifying heterojunction consisting of polyparaphenylene(PPP) and polypyrrole(PPY) films was prepared by the electrochemical method. The photoresponse in the heterojunction of PPY and PPP is similar to the absorption spectrum of undoped PPP. This fact suggests that photoresponse depends strongly upon polyparaphenylene of semiconductor. The fill-factor was calculated from the photo current-voltage curve to be 0.19, which is relatively small compared to polyacetylene-polythiophene heterojunctions.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.6-11
• /
• 2009

VA Mode LC를 사용하는 Full-HD급 LCOS 마이크로디스플레이에서 셀 상하 간격의 변화에 따른 전기광학적 특성의 변화에 관하여 3차원 LC code를 이용하여 연구하였다. 5가지의 다른 셀 상하 간격 (1.4 ${\mu}m$, 1.8 ${\mu}m$, 2.1 ${\mu}m$, 2.4 ${\mu}m$ 그리고 2.8 ${\mu}m$)의 변화에 따라 Reflectance-Voltage 특성, 반사광 및 반사율 분포, Optical Fill Factor 그리고 명암비를 비교하였다. Surface Anchoring 효과에 의해 상하 간격이 증가하면서 반사율은 증가하였으나 Optical Fill Factor와 명암비를 고려할 경우, 중간 수준의 간격인 2.1 ${\mu}m$ 의 특성이 가장 우수함을 확인할 수 있었다. 동일한 구조를 갖고 있는 0.7 인치 LCOS 패널을 제작하여 광학적 측정을 해 본 결과 시뮬레이션 결과와 통일함을 확인할 수 있었다.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.149-156
• /
• 2013

본 논문에서는 bump 회로를 이용한 하드웨어 기반의 윤곽선 검출 회로를 제안한다. 하나의 픽셀은 빛을 전기적인 신호로 변환하는 active pixel sensor (APS)와 주변 픽셀의 밝기 차이를 비교하는 bump회로로 구성된다. 제안하는 회로는 $64{\times}64$의 이미지를 대상으로하며, 각 열(column)마다 비교기를 공유한다. 비교기는 외부에서 인가되는 기준전압을 통해 최종적으로 대상픽셀의 윤곽선 여부를 판별한다. 또한 기존의 4개 혹은 그 이상의 픽셀 데이터를 비교하는 윤곽선 검출 알고리즘을 상대적으로 간소화하여 대상픽셀을 포함하여 3개의 픽셀만으로 윤곽선 검출을 가능토록 제안하였다. 따라서 하나의 픽셀에 비교적 적은 수의 트랜지스터로 구성하였다. 따라서 제한적인 픽셀 크기에서 fill factor를 충분히 확보함으로써 수용 가능한 조도의 범위를 확장하였고, 기준전압을 외부에서 입력 받기 때문에 윤곽선 레벨을 조절 할 수 있다. Bump 회로기반의 윤곽선 검출 회로는 0.18um CMOS 공정에서 설계되었으며, 1.8V의 공급전압에서 픽셀 당 0.9uW의 전력 소모율, 34%의 fill factor을 갖는다. 이는 기존회로대비 전력 소모율을 90% 개선하였고, 기존 회로에 비하여 면적은 약 18.7%, fill factor는 약 16%를 더 확보하였다.