• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.6
• /
• pp.635-645
• /
• 2003

One of very important features that are necessarily supported by clustered parallel computer systems is a single I/O system image in which users can access both the local and remote I/O resources transparently. In this paper, we propose an efficient disk sharing technique supporting a single disk I/O system image architecture. The design separates the I/O subsystem of a cluster into the file system and a set of virtual hard disk drivers. The virtual hard disk driver deals with a hard disk in the remote node as a local hard disk. All services provided by it are performed in the device driver level without any modification of file systems. Users can, therefore, access all the disks in the cluster regardless of their locations. Our virtual hard disk driver is implemented under the linux, and also tested in a linux cluster system. We find by experiments that it can successfully support a single disk I/O space, and at the same time it shows better performance than NFS. We are sure that this paper can be a guideline for single I/O space of other devices to be easily constructed.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.399-404
• /
• 2002

Along the evolution of information and communication technologies, manufacturing embedded systems such as PDA (personal digital assistant), HPC (hand -held PC), settop box. and information appliance became realistic. And RTOS (real-time operating system) and filesystem have been played essential re]os within the embedded systems as well. For the filesystem of embedded systems, flash memory has been used extensively instead of traditional hard disk drives because of embedded system's requirements like portability, fast access time, and low power consumption. Other than these requirements, nonvolatile storage characteristic of flash memory is another reason for wide adoption in industry. However, there are some technical challenges to cope with to use the flash memory as an indispensable component of the embedded systems. These would be relatively slow cleaning time and the limited number of times to write-and-clean. In this paper, a new cleaning policy is proposed to overcome the problems mentioned above and relevant performance comparison results will be provided. Ranking cleaning policy(RCP) decides when and where to clean within the flash memory considering the cost of cleaning and the number of times of cleaning. This method will maximize not only the lifetime of flash memory but also the performance of access time and manageability. As a result of performance comparison, RCP has showed about 10 ~ 50% of performance evolution compared to traditional policies, Greedy and Cost-benefit methods, by write throughputs.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.390-397
• /
• 2006

The purpose of this study was to evaluate the accuracy and the consistency of four different electronic apex locators in an in vitro model. Fourty extracted premolars were used for the study. Four electronic apex locators (EAL) were Root ZX, Smarpex, Elements Diagnostic Unit (EDU), and E-Magic Finder Deluxe (EMF). After access preparation, the teeth were embedded in an alginate model and the length measurements were carried out at '0.5' and 'Apex' mark using four EALs. The file was cemented at the location of the manufacturers' instruction (Root ZX, EDU, EMF: 0.5 mark, SmarPex: Apex mark). The apical 4mm of the apex was exposed and the distance from the file tip to the major foramen was measured by Image ProPlus (${\times}100$). The distance from the file tip to the major foramen was calculated at 0.5 and Apex mark and the consistency of 0.5 and Apex mark was compared by SD and Quartile of Box plots. In this study, Root ZX and EMF located the apical constriction accurately within ${\pm}0.5 mm$ in 100%, whereas SmarPex and EDU located in 90% and in 70% respectively. For Root ZX and EMF, there was no significant difference between the consistency of 0.5 and Apex mark. However, for the EDU and SmarPex, Apex mark was more consistent than 0.5 mark. From the evaluation of the consistency in this study, for Root ZX and EMF, both 0.5 and Apex mark can be used as a standard mark. And for EDU and SmarPex, the Apex mark can be recommended to be used as a standard mark.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.213-221
• /
• 2022

Purpose: The efficacy of the amount of sealer in the root canal and two retreatment NiTi file systems in removing filling materials. Materials and Methods: Extracted premolars with a single root canal were selected for this study. After access opening and root canal preparation up to size #40/.06, the specimens were randomly divided into four groups. Gutta percha (GP) tapers of .06 or .04 were used for each group and filled using a single-cone filling technique with CeraSeal, a calcium silicate-based sealer. Each group was retreated either using the ProTaper Universal Retreatment System (PTUR) or the Hyflex Remover (HR). The time taken to remove the filling material, the amounts of apically extruded debris, and canal cleanliness were measured and compared. Results: The amount of sealer did not affect the efficiency when removing the filling materials. However, the filling material was removed faster in the HR group than in the PTUR group. Two types of NiTi files showed similar retreatment effects in the amounts of apically extruded debris and in the degree of canal cleanliness. Conclusion: The amount of sealer in canal filling had no significant effect on retreatability. Retreatment with HR removed filling materials is faster than PTUR. There was no difference in other removal efficiencies according to the type of retreatment NiTi file.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.1
• /
• pp.31-40
• /
• 2014

In Korea, the Public Key Infrastructure (PKI) has been introduced. For secure information transmission and identification, the electronic signature authorization system of a certificate-based is built, and then the service provide.The certificate is stored in location what users can easily access and copy. Thus, there is a risk that can be stolen by malware or web account hacking. In addition, private key passwords can be exposed by the logging tool, after keyboard security features are disabled. Each of these security weaknesses is a potential conduit for identity theft, property/asset theft, and theft of the actual certificates. The present study proposes a method to prevent the private key file access illegally. When a certificate is stored, the private key is encrypted by the dependent element of the device, and it is stored securely. If private key leakage occurs, the retrieved key could not be used on other devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1187-1193
• /
• 2002

There are POP3(Post Office Progocol 3) and IMAP4(Internet Message Access Protocol 4) for E-Mail service of wire Internet For mobile e-mail service that use wireless Internet, must use exclusive use mobile e-mail server in the case of POP3 e-mail or flow e-mail conversion and because e-mail is kept in sever side with remote file server in case of IMAP4 mail that is used by Web-Mail, utilization of mobile e-mail service is difficult by mobile client who there is no IMAP4 rules. This thesis embodying e-mail extraction engine for mobile that do to design markup language converter of XML base, and use Web-Mail of recently been generalizing IMAP4 base in mobile, presented mobile e-mail service method to do so that can use Web-Mail that is based on IMAP4 as well as POP3 mail service in mobile environment.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.54-62
• /
• 2010

Inverted index structures have become the most efficient data structure for high performance indexing of large text collections, especially online index maintenance, In-Place and merge-based index structures are the two main competing strategies for index construction in dynamic search environments. In the above-mentioned two strategies, a contiguity of posting information is the mainstay of design for online index maintenance and query time. Whereas with the emergence of new storage device(SSD, SCRAM), those do not consider a contiguity of posting information in the design of index structures because of its superiority such as low access latency and I/O throughput speeds. However, SSD(Solid State Drive) is not well suited for traditional inverted structures due to the poor random write throughput in practical systems. In this paper, we propose the new efficient online index structure(SPM) for SSD that significantly reduces the query time and improves the index maintenance performance.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.767-774
• /
• 2010

Due to advantages of NAND flash memory such as non-volatility, low access latency, low energy consumption, light weight, small size and shock resistance, it has become a better alternative over traditional magnetic disk drives, and has been widely used. Traditional DBMSs including mobile DBMSs may run on flash memory without any modification by using Flash Translation Layer (FTL), which emulates a random access block device to hide the characteristics of flash memory such as "erase-before-update". However, most existing FTLs are optimized for file systems, not for DBMSs, and traditional DBMSs are not aware of them. Also, traditional DBMSs do not consider the characteristics of flash memory. In this paper, we propose a flash-conscious storage system for DBMSs that utilizes flash memory as a main storage medium, and carefully put the characteristics of flash memory into considerations. The proposed flash-conscious storage system exploits log records to avoid costly update operations. It is shown that the proposed storage system outperforms the state.

• The Journal of Society for e-Business Studies
• /
• v.8 no.2
• /
• pp.33-48
• /
• 2003

Wireless Internet, created through the merging of mobile communication with Internet technology, provides the advantage of mobility, but the restrictions of the mobile environment are deterring it from growing into a mass public service. Of the restricting factors of the wireless environment, narrow memory space creates the disadvantage of not being able to manage resources in mobile devices efficiently Because there is a limit to obtaining sufficient memory space from hardware made with consideration of portability, future devices will need to have a platform design with storage area extended from internal storage to external storage space. In this paper, we present a mobile agent that extends the memory space from only the inside of a mobile device to an external server making it possible to use data by on-line Run-time, and can also manage internal files efficiently. We have designed and implemented a RMS(Resources Management System) as a realization. Devices using the proposed RMS will be able to apply extended processes with the 'Mobile Space Extension' and will be benefited with optimal memory space through efficient internal file management.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.99-115
• /
• 2000

A geographic information system (GIS) generally has a great deal of geographic data and has a singular storage structure individually. It is very hard to exchange geographic data between geographic information systems which store their geographic data with incompatible formats. Moreover, since it needs large amount of storage space to store geographic data and expensive cost to input them. In this paper, we designed and implemented a SDTS (Spatial Data Transfer Standard) Data Conversion System for Gothic which is an existing geographic information system. In order to convert geographic data without loss of information, we first carefully define a mapping between SDTS data and Gothic data. Especially, since SDTS data are in the format of ISO8211, the FIPS123 library is used to access them. Because the internal data format of Gothic is not open to the public, we also use the Gothic library to access Gothic data. The SDTS data conversion system developed in this paper uses an intermediate file to convert geographic data efficiently. In addition, we use UIL (User Interface Language) to implement a graphic user interface (GUI) of our system.