• 환경생물
• /
• 제37권3호
• /
• pp.285-292
• /
• 2019

Acinetospora filamentosa and Microspongium stilophorae are reported as new records from South Korea based on morphological and molecular analyses. A. filamentosa is mainly characterized by having the sparsely branched erect filaments, the scattered meristematic zones, forming crampons, plurilocular sporangia on both prostrate filaments and lower part of erect filaments, and spherical to oval unilocular sporangia formed either sessile or with a pedicel. M. stilophorae is an epiphytic thalli mostly on Stilophora sp. It is characterized by prostrate filaments with irregular cells, short erect filaments with short ramuli, phaeophycean hairs, uniseriate plurilocular sporangia on the terminal part of erect filament. Our molecular analyses of rbcL and cox1 genes reveals that A. filamentosa and M. stilophorae are nested within the clades of Acinetospora and Microspongium, respectively.

• 한국축산시설환경학회지
• /
• 제6권2호
• /
• pp.65-72
• /
• 2000

This study was conducted to investigate the effects of artificial filaments equipped in the aeration tank of aerobic·fermentation system on the removal efficiency of swine wastes which were fermented an aerobically and thus containing high nitrogen. Two aerobic fermentation system each consist4s of 4 tanks ; storage tank, 1st and 2nd aeration tank and settling tank were run before and one or three weeks after equipment of artificial filament in the aeration tanks. Total solids concentration tended to increase by aerobic fermentation in all running periods. However, decreased(P<0.05) total nitrogen concentration was shown three weeks after the equipment of artificial filament. Ammonia nitrogen concentration also largely decreased(p<0.05) in both running periods of one and three weeks after equipment of artificial filaments. These results suggest that the artificial filaments may improve the removal efficiency of nitrogen in swine wastewater containing high nitrogen during aerobic fermentation.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.326-328
• /
• 2002

In many plant cells, the positions of chloroplasts change in response to changes in light conditions. In the epidermal cells of the aquatic angiosperm Vallisneria gigantea, the avoidance response of chloroplasts is induced specifically by irradiation with blue light of high intensity. Possible roles of actin cytoskeleton in the blue-light-induced avoidance response of chloroplasts were investigated by partial irradiation and phalloidin staining. We showed that the blue-light-dependent redistribution of chloroplasts was induced only in the limited area, where exposed to blue light, even in individual cells. In addition. in the exposed area, the configuration of actin filaments strikingly changed compared with that before the irradiation. Short and thick bundles of actin filaments surrounding the chloroplasts changed to much longer and thinner bundles with a more stretched array. In contrast, in the unexposed area, neither the distribution of chloroplasts nor the configuration of actin filaments exhibited any changes. Cytochalasin D and latrunculin B inhibited the avoidance response of chloroplasts concomitantly with the fragmentation of actin filaments. These results indicate that the reorganization of actin filaments plays a crucial role in the induction of avoidance response of chloroplasts.

• Fibers and Polymers
• /
• 제3권1호
• /
• pp.38-42
• /
• 2002

Polypropylene filaments were spun from a mixture of PP chips of two different Melt Flow Index (MFI) (3 MFI and 35 MFI). A significant difference was observed in the melting characteristics of the resultant filaments from either of the individual components as observed from the DSC. The main difference being in the degree of melting achieved at any temperature in the initial stages of the melting range, which was found to be higher in case of the filaments spun from the b]end. These filaments were then thermally bonded using silicon oil bath and heated roller method. Subsequently the bond strength of the filaments was measured on the Instron Tensile Tester using the loop technique. The values of the world strengths obtained from the blend were compared with those made from the individual component. It was found that the bond strength of the bonds obtained from the blended filament at a given temperature was higher than that of the bonds made from the filaments of either of the individual components, which is also suggested by the DSC curves. The difference in the bond strength was found to be as high as 25% in case of the blend with 60:40 composition ratios of the 3 MFI and 35 MFI components respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.193-197
• /
• 2005

Influences of microstructure on high-cycle fatigue (HCF) limit of high carbon $(>0.7wt.\;\%)$ steel filaments used for tires have been investigated. A series of the fatigue tests was carried out depending on carbon content by using Hunter-type tester at a frequency of 60 Hz at a tension/compression stress of 900 to 1500 MPa. Microstructural changes of the filaments were identified in the lateral direction by using transmission electron microscopy (TEM). It was found that the mechanical properties, such as fatigue limit and tensile strength, were improved with increasing carbon content, which was mainly attributed to decreased lamellar spacing and cementite thickness. However, the fatigue ratio, which is defined as the ratio of the fatigue limit to the tensile strength, was reduced in a higher carbon range of 0.8 to $0.9\;wt.\%$, while the fatigue ratio was nearly constant in a lower carbon range of 0.7 to $0.8\;wt.\%$. Overall mechanical properties of the filaments, depending on carbon content, have been discussed in terms of the microstructural parameter change of lamellar spacing and cementite thickness. In addition, the variation of cementite morphology on the fatigue crack propagation of high carbon $(0.9wt.\;\%)$ filaments will be discussed.

• Mass Spectrometry Letters
• /
• 제1권1호
• /
• pp.17-20
• /
• 2010

As background significantly affects measurement accuracy and a detection limit in determination of the trace amounts of uranium, it is necessary to minimize the impurities in the filaments used for thermal ionization mass spectrometry (TIMS). We have varied the degassing condition such as the heating currents and duration times to reduce the backgrounds from the filaments prepared with zone-refined rhenium tape. The most efficient degassing condition of the heating current and the duration time was determined as 3.5 A and 60 min, respectively. The TIMS measurement combined with the isotope dilution mass spectrometry (IDMS) technique showed that the uranium backgrounds were determined to be in a few fg level from blank rhenium filaments. The background minimized filaments were utilized to measure the uranium isotope ratios of a U030 (NIST) standard sample. The excellent agreement of the measurement with the certified isotope ratios showed that the degassing procedure optimized in this study efficiently reduced the impurity signals of uranium from blank rhenium filaments to a negligible level.

• 천문학회보
• /
• 제40권2호
• /
• pp.47.2-47.2
• /
• 2015

We present a large scale structure consisting of eight galaxy filaments around the Virgo cluster in the window of -20 Mpc < SGX, SGZ < 20 Mpc, and 4 Mpc < SGY < 32 Mpc using the HyperLEDA database. While six of the filaments were reported in previous studies, two filaments are newly found in this study. We exploited a large number of faint ($M_B$ < -10) galaxies in comparison with previous studies, which facilitates defining filaments more clearly. The previously known filaments are all in SGY < 16 Mpc and appear to distribute in association with the Virgo cluster in galaxy distribution. Moreover, peculiar velocities of galaxies in these filaments show a distinct offset from the Hubble flow indicating their infall motion toward the Virgo cluster. All of these results confirm that these filamentary structures are under the gravitational influence of the Virgo cluster. Both of the newly discovered filaments are located beyond the 'zero-velocity surface' of the Virgo cluster. One of them is associated in the NGC5353/4 group and the other one appears to penetrates the W and M group of the Virgo cluster. The filamentary structure around the Virgo cluster consisting mainly of the dwarf galaxies allows us to achieve a better understanding of large scale structure and its influence on the build-up of the galaxy cluster at z~0.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.108-108
• /
• 2017

In this study, biocomposite filaments with agricultural by-products can be used in extrusion-based 3D (Three-dimensional) printing. Extrusion-based 3D printing stands as a promising technique owing to its versatility. We hypothesized that bio-filament composite consisted of something derived from agricultural by-products could be used as 3D printing materials that could overcome the drawbacks of PCL (poly-caprolactone). Bio-filament mixed with PCL and agricultural by-products was defined as r-PCL in this study. In order to find it out the optimal mixing ratio of filaments, we had investigated PCL, r-PCL 10%, r-PCL 20%, r-PCL 50% separately. The morphological and chemical characteristics of the filaments were analyzed by FE-SEM (Field emission scanning electron microscope) and EDX (Energy-dispersive X-Ray spectroscopy), and the mechanical properties were evaluated by stress-strain curve, water contact angle, and cytotoxicity analysis. Results of this study have been shown as a promising way to produce eco-friendly bio-filaments composite for FDM (Fused deposition modeling) method based 3D printing technology. Thus, we could establish biomimetic scaffolds based on bio-printer filaments mixed with agricultural by-product.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.230-235
• /
• 2000

The extrusion process for long-length multi-filaments of BSCCO 2223 superconductor tape has been investigated with aids of Finite Element Method and experimental inspection. Since the arrangement of filaments in matrix material has characteristic of rotational symmetry, a 2-dimensional commercial FEM package, DEFORM-2D, was adopted to simulate extrusion process with different variables such as hardness of sheath material, lengths of each filament and arrangement. From the FEM analysis, since the inner filaments move faster than the outer one, distribution of filaments is needed to be optimized. In the case of pure Ag matrix, undesirable non-uniform distribution of filament was obtained due to low hardness of sheath material. Dummy sample(brass (sheath) and talc powder(filament)), however, which has relatively high hardness of sheath material, had been produced with desirable results. Therefore, it is necessary to optimize hardness of sheath material, extrusion temperature and billet design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1521-1523
• /
• 2000

NbTi/Cu superconducting wires were jointed inserting the NbTi filaments into Cu/NbTi sleeve and pressing it. When the NbTi filaments were inserted into Cu/NbTi sleeve additional NbTi filaments were inserted together to increase the numbers of filaments in the hole of sleeve. The thickness of sleeves and dimples were changed to get optimal factor for high Ic of joint Critical current of the joint with additional NbTi Filaments and 17mm thickness of dimple was 450 A at 4.2K, 0.5T.