• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.241-241
• /
• 2008

Macrofore formation in silicon and other semiconductors using electrochemical etching processes has been, in the last years, a subject of great attention of both theory and practice. Its first reason of concern is new areas of macropore silicone applications arising from microelectromechanical systems processing (MEMS), membrane techniques, solar cells, sensors, photonic crystals, and new technologies like a silicon-on-nothing (SON) technology. Its formation mechanism with a rich variety of controllable microstructures and their many potential applications have been studied extensively recently. Porous silicon is formed by anodic etching of crystalline silicon in hydrofluoric acid. During the etching process holes are required to enable the dissolution of the silicon anode. For p-type silicon, holes are the majority charge carriers, therefore porous silicon can be formed under the action of a positive bias on the silicon anode. For n-type silicon, holes to dissolve silicon is supplied by illuminating n-type silicon with above-band-gap light which allows sufficient generation of holes. To make a desired three-dimensional nano- or micro-structures, pre-structuring the masked surface in KOH solution to form a periodic array of etch pits before electrochemical etching. Due to enhanced electric field, the holes are efficiently collected at the pore tips for etching. The depletion of holes in the space charge region prevents silicon dissolution at the sidewalls, enabling anisotropic etching for the trenches. This is correct theoretical explanation for n-type Si etching. However, there are a few experimental repors in p-type silicon, while a number of theoretical models have been worked out to explain experimental dependence observed. To perform ordered macrofore formaion for p-type silicon, various kinds of mask patterns to make initial KOH etch pits were used. In order to understand the roles played by the kinds of etching solution in the formation of pillar arrays, we have undertaken a systematic study of the solvent effects in mixtures of HF, N-dimethylformamide (DMF), iso-propanol, and mixtures of HF with water on the macrofore structure formation on monocrystalline p-type silicon with a resistivity varying between 10 ~ 0.01 $\Omega$ cm. The etching solution including the iso-propanol produced a best three dimensional pillar structures. The experimental results are discussed on the base of Lehmann's comprehensive model based on SCR width.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.8
• /
• pp.340-346
• /
• 2002

Capacitor material utilized in the downsizing passive devices and integration of passive devices requires the physical and electrical properties at given area such as capacitor thickness reduction, relative dielectric constant increase, low leakage current and thermal stability. common capacitor materials, $Al_2O_3$, $SiO_2$, $Si_3N_4$, $SiO_2$/$Si_3N_4$, TaN and et al., used until recently have reached their physical limits in their application to integration of passive devices. $Ta_2O_{5}$ is known to be a good alternative to the existing materials for the capacitor application because of its high dielectric constant (25~35), low leakage current and high breakdown strength. Despite the numerous investigations of $Ta_2O_{5}$ material, there have little been established the clear understanding of the annealing effect on capacitance characteristic and conduction mechanism. This study presents the dielectric properties $Ta_2O_{5}$ MIM capacitor structure Processed by $O_2$ RTA oxidation. X-ray diffraction patterns showed the existence of amorphous phase in $600^{\circ}C$ annealing under the $O_2$ RTA and the formation of preferentially oriented-$Ta_2O_{5}$ in 650, $700^{\circ}C$ annealing and the AES depth profile showed $O_2$ RTA oxidation effect gives rise to the $O_2$ deficientd into the new layer. The leakage current density respectively, at 3~1l$\times$$10_{-2}$(kV/cm) were $10_{-3}$~$10_{-6}$(A/$\textrm{cm}^2$). In addition, behavior is stable irrespective of applied electric field. the frequency vs capacitance characteristic enhanced stability more then $Ta_2O_{5}$ thin films obtained by $O_2$ reactive sputtering. The capacitance vs voltage measurement that, Vfb(flat-band voltage) was increase dependance on the $O_2$ RTA oxidation temperature.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.234-238
• /
• 2012

A tumor on the eyelid is often treated using a high-energy electron beam, with a metallic eye shield inserted between the eyelid and the eyeball to preserve the patient's sight. Pretreatment quality assurance of the inner eyelid dose on the metallic shield requires a very small dosimetry tool. For enhanced accuracy, a flexible device fitting the curved interface between the eyelid and the shield is also required. The radiochromic film is the best candidate for this device. To measure the doses along the curved interface and small area, a 3-mm-wide strip of EBT2 film was inserted between the phantom eyelid and the shield. After irradiation with 6 MeV electron beams, the film was evaluated for the dose profile. An acrylic eye shield of the same size as the real eye shield was machined, and CT images free from metal artifacts were obtained. Monte Carlo simulation was performed on the CT images, taking into account eye shield material, such as tungsten, aluminum, and steel. The film-based interface dose distribution agreed with the MC calculation within 2.1%. In the small (millimeter scale) and curved region, radiochromic film dosimetry promises a satisfactory result with easy handling.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.104-108
• /
• 2001

The effect of specular electron scattering on natural oxidation of free layer in NiO spin valves have been investigated. The magnetoresistance (MR) ratio and the exchange biasing field ( $H_{ex}$) of NiO(600 $\AA$)Ni$_{81}$$Fe_{19}$(50$\AA$)/Co(7 $\AA$)/Cu(20 $\AA$)/Co(7 $\AA$)Ni$_{81}$$Fe_{19}$(70 $\AA$) spin valves were increased from 4.9 % to 7.3 %, and 110 Oe to 170 Oe after natural oxidation in the atmosphere for 80 days, respectively. The sheet resistivity p decreased from 28$\mu$$\Omega$m to 17$\mu$$\Omega$m, but $\Delta$$\rho$ did not almost change after the oxidation. The spin valves enhanced by the specular electron scattering in the natural]y Co/NiFe/NiFe $O_{x}$ free layer were confirmed from the depth profiles using Auger electron spectroscopy.scopy..

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.201-205
• /
• 2004

In these several years, as many people have been attracted by the functional cosmetics, there are a lot of study to enhance the stability of active ingredients for light, heat, oxygen, etc. in the academic and industrial field. Especially, catechin is well known as strong anti-oxidant, anti-inflammatory and reducing agent for oxidative stress but it is very unstable for light, heat, oxygen. etc. In this study, the stability and skin penetration of catechin are improved by 3-dimensional method. As I-dimension, porous silica is prepared using sol-gel method, and then catechin is adsorbed in pores of silica. As 2-dimension, solid lipid nanoparticles (SLN) are obtained using non-phospholipid vesicles. Finally 3-dimension is completion through lamellar phase self-organization that combines SLN catechin with skin lipid matrix. We used laser light scattering system, cyro-SEM, chromameter, HPLC and image analyzer to analyze our 3-dimentional systems. According to chromameter date, the color stability of 3-dimensional catechin is enhanced by 5-10 times compared with general liposome systems. We also confirmed through HPLC analysis that 3-dimensional catechin is more long lasting. The effect of skin penetration and wrinkle reduction are improved, too.

• Korean Journal of Materials Research
• /
• v.30 no.11
• /
• pp.601-608
• /
• 2020

In this work, Ag₃PO₄/In₂S₃ nanocomposites with low loading of In₂S₃ (5-15 wt %) are fabricated by two step chemical precipitation approach. The microstructure, composition and improved photoelectrochemical properties of the as-prepared composites are studied by X-ray diffraction pattern (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photocurrent density, EIS and amperometric i-t curve analysis. It is found that most of In₂S₃ nanoparticles are deposited on the surfaces of Ag₃PO₄. The as-prepared Ag₃PO₄/In₂S₃ composite (10 wt%) is selected and investigated by SEM and TEM, which exhibits special morphology consisting of lager size substrate (Ag₃PO₄), particles and some nanosheets (In₂S₃). The introduction of In₂S₃ is effective at improving the charge separation and transfer efficiency of Ag₃PO₄/In₂S₃, resulting in an enhancement of photoelectric behavior. The origin of the enhanced photoelectrochemical activity of the In₂S₃-modified Ag₃PO₄ may be due to the improved charge separation, photocurrent stability and oriented electrons transport pathways in environment and energy applications.

• Korean Journal of Weed Science
• /
• v.7 no.1
• /
• pp.19-28
• /
• 1987

These experiments were conducted to recognize the germination change in relation to storage period, using 25 kinds of field-collected weed seeds stored under the dry and low temperature ($4{\pm}1^{\circ}C$), and to establish a simple germination induction methods in some kinds of them. No or weak dormancy was observed in Lepidium virginicum, Rumex japonicus, Cirsium japonicum var. ussuriense, Aeschnomene indica and Ludwigia prostrate. The germination of Digltaria sanguinalis, Portulaca oleracea, Amaranthus spp., Echinochloa crux-galli, Polygonum persicaria, Cyperus iria, and Aeschynnmene indica was enhanced by $H_2SO_4$ treatment for 20, 2, 2, 50, 40, 3 or 5 minutes, respectively. Favorable germination in Polygonum persicaria and Echinochloa crus-galli was obtained by soaking in water for 25 days and 50 days, respectively. Moisture treatment for 21 days and 14 days caused the enhancement of germination in Cyperus difformis and Aneilema keisak, respectively. Combination of various treatments in Cyperus iria was most effective when the seeds treated with $H_2SO_4$ for 3 minutes incubated in alternating temp. after soaking in 0.2% $KNO_3$, but their effect on Digitaria sanguinnlis was little.

• Korean Journal of Weed Science
• /
• v.7 no.1
• /
• pp.98-106
• /
• 1987

The effect of carbofuran (2, 3-Dihydro-2,2-dimethyl-benzofuran-7-ylmethyl carbamate) on rice growth was evaluated as a direct growth stimulant of rice. For this, several laboratory and field trials conducted from 1981 to 1986 at the Yeongnam Crop Experiment Station. Carbofuran solution affected the germination of rice seed. The growth of seminal roots was adversely affected by the increase of carbofuran concentrations while the length of single root became longer with the concentration increment up to 50 ppm. Carbofuran application (0.18g ai/$m^2$) at the rice nurserybed significantly enhanced the rice growth and recovered from the Low temperature damage. The enhancement effect was more pronounced at the plot that applied carbofuran before rice seeding as soil incorporation than top-dressing. The effect of growth enhancement further extended to transplanted lowland rice. This effect was greater at double cropping area (late of June transplanting) compared to single cropping area (May transplanting). Among important agronomic traits, the increment of panicle number was the most important direct effect for increasing rice grain yield by carbofuran application. Carbofuran application also exhibited the reducing effect against low temperature damage at reductive division stage and at rice heading stage and against submergence damage at booting stage through enhancement of fertile grain ratio, ripening ratio or photosynthetic activity.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.243-251
• /
• 1997

In this paper, we have reported two interesting flow effects arising in the TRFGE sequence using water flow phantom. First, we have shown that the TRFGE sequence is indeed not affected by "in-flow" effect from the unsaturated spins flowing into the imaging slice. Second, the enhancement of "in-plane flow" signal in the readout gradient direction was observed when the TRFGE sequence was used without flow compensation. These two results have many interesting applications in MR imaging other than fMRI. Results obtained were also compared with the results obtained by the conventional gradient echo(CGE) imaging. Experiments were performed at 4.7T MRI/S animal system (Biospec, BRUKER, Switzerland). A cylindrical phantom was made using acryl and a vinyl tube was inserted at the center(Fig. 1). The whole cylinder was filled with water doped with $MnCl_2$ and the center tube was filled with saline which flows in parallel to the main magnetic field along the tube. Tailored RF pulse was designed to have quadratic ($z^2$) phase distribution in slice direction(z). Imaging parameters were TR/TE = 55~85/10msec, flip angle = $30^{\circ}$, slice thickness = 2mm, matrix size = 256${\times}$256, and FOV= 10cm. In-flow effect : Axial images were obtained with and without flow using the CGE and TRFGE sequences, respectively. The flow direction was perpendicular to the image slice. In-plane flow : Sagittal images were obtained with and without flow using the TRGE sequence. The readout gradient was applied in parallel to the flow direction. We have observed that the "in-flow" effect did not affect the TRFGE image, while "in-plane flow" running along the readout gradient direction enhanced the signal in the TRFGE sequence when flow compensation gradient scheme was not used.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.6
• /
• pp.160-170
• /
• 2017

As a monumental building in the form of an arch, an archway has the characteristics of praise and honor. More and more historic, cultural and social connotations are given during the development of history. Four archways that are located on the middle route of the Red Gate Palace in the Mount Tai Scenic Area were chosen for research. Based on a literature review and field investigation with a visual analysis method, the physical attributes, spatial scale, perceptions and functions of the archways were discussed. The results were as follows: The archways in the research area are all made of stone. According to building location, they are classified into two types: Cultural archway and temple archway. Regarding functions, they are divided into symbolic archway, memorial archway and portal archway. From the point of view of form and scale, the Confucius Boarding Archway enjoys a higher standard than the other three. This reflects the importance of Confucian culture on Mount Tai. Regarding spatial scale, the archway becomes the focus in a restrictive linear space by an object-to-object and person-to-object comparison. Visitor experience of crossing the archways is strongly enhanced as it acts as entrance and exit, and it has the function of guiding sight since the arrangement of the archways further extend the line of sight. Couplets and inscriptions on the archways increase a sense of expectation for visitors on their way to the top of Mount Tai.