• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.281-294
• /
• 2012

The current status of the computer codes for the analysis of coupled thermal-hydrological-mechanical behavior occurred in a high-level waste repository was investigated. Based on the reported results on the comparison between the predictions using the computer codes and the experimental data from the in-situ tests, the reliability of the existing computer codes was analyzed. The presented codes simulated considerably well the coupled thermal-hydrological-mechanical behavior in the near-field rock of the repository without buffer, but the predictions for the engineered barrier system of the repository located at saturated hard rock were not satisfactory. To apply the current thermal-hydrological-mechanical models to the assessment of the performance of engineered barrier system, a major improvement on the mathematical models which analyze the distribution of water content and total pressure in the buffer is required.

• Journal of Animal Environmental Science
• /
• v.6 no.1
• /
• pp.1-14
• /
• 2000

The structural and environmental characteristics of typical pig houses in different growth phases were surveyed and analyzed. Based on the data for thirty nine selected farms in four provinces, Jeonbuk-do, Jeonnam-do, Gyeongbuk-do, and Gyeongnam-do, in the southern provinces, Korea, the goal is to eventually establish standard pig houses of sow and litter, nursery pigs, and growing-finishing pigs. The survey included farm scale, production specialization, structural dimensions of the houses and their ventilation systems, cooling and heating systems, and floor and pit systems related to manure collection. The survey showed 90∼98% of growing-finishing pig houses adopted the sidewall curtain systems. The sidewall curtain systems, although popular, is not well insulated which leads to excessive heating costs in winter. Regarding flooring and manure collection system of the house, 23∼35% of growing-finishing houses installed scraper systems with concrete-slat floors in Gyeongsang provinces while 52∼78% did in Jeolla provinces. The cause of a large variance in flooring between tow regions could not be academically pinpointed, rather it could be attributed to the advice of neighbors who leads local pig production circle. A general trend toward enlargement and enclosure of pig houses for all growth phases was gaining popularity in most regions in recent years. A steady shift to multisite operation from continuous operation was also observed to prevent a disease transfer. The structural design of a standard pig house with its environmental control systems including ventilation and heating/cooling system was suggested for further validation study. In-depth analysis of the survey data is presented in the Results and Discussion section.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.83-90
• /
• 2011

The purpose of this study is to develop a series of trend analysis models for industrial water consumption and to propose a blueprint for the integration of the developed models with GIS. For the consumption data acquisition, a real-time sensing technique was adopted. Data were transformed from the field equipments to the management server in every 5 minutes. The data acquired were substituted to a polynomial formula selected. As a result, a series of models were developed for the consumption of each day. A series of validation processes were applied to the developed models and the models were finalized. Then the finalized models were transformed to the average models representing a day's average consumption or an average daily consumption of each month. Demand pattern analyses were fulfilled through the visualization of the finally derived models. It has founded out that the demand patterns show great consistency and, therefore, it is concluded that high probability of demand forecasting for a day or for a season is available. Also proposed is the integration with GIS as an IT tool by which the developed forecasting models are utilized.

• Economic and Environmental Geology
• /
• v.26 no.2
• /
• pp.207-215
• /
• 1993

In modem petroleum reservoir engineering, the characterization of reservoir heterogeneities is very important to accurately understand and predict reservoir production performance. Formation evaluation for the description of reservoir is generally conducted by performing the analysis of well logging, core testing, and well testing. However, the measured data points by well logging or core testing are in general very sparse and hence reservoir properties should be interpolated and extrapolated from measured points to uncharacterized areas. In assigning the data for the unknown points, simple averaging technique is not feasible as optimum estimation method since this method does not account the spatial relationship between the data points. The main goal of this work is to develop PC-version of multi-purpose geostatistical model in which several stages are systematically proceeded. In the development of model, the simulator employs a automatic selection of semivariogram function such as exponential or spherical model with the best values of $R^2$. The simulator also implements a special algorithm for the fitting of semivariogram function to experimental sernivariogram. The special algorithm such as trial and error scheme is devised since this method is much more reliable and stable than Gauss-Newton method. The simulator has been tested under stringent conditions and found to be stable. Finally, the validity and the applicability of the developed model have been studied against some existing actual field data.

• Journal of Animal Environmental Science
• /
• v.5 no.1
• /
• pp.1-15
• /
• 1999

The structural and environmental characteristics of typical pig houses in different growth phases were surveyed and analyzed. Based on the data for thirty six selected farms in four provinces, Gyonggi-do, Gangwon-do, Choongnam, and Chonbook, in Central Korea, the goal is to eventually establish standard pig houses of sow and litter, nursery pigs, and growing-finishing pigs. The survey included farm scale, production specialization, structural dimensions of the houses and their ventilation systems, cooling and heating systems, and floor and pit systems related to manure collection. The survey showed 90∼99% of growing-finishing curtain installation rate was lower by 10∼20%. The sidewall curtain system, although popular, is not well insulated which leads to excessive heating costs in winter. Regarding flooring and manure collection system of the house, there was quite a lot variability among provinces, with 30∼80% of the houses installing scraper systems with concrete-slat floors in comparison with 30∼60% using a slurry system. Gangwon-do and Choongbook Chungwoo-goon are the predominant regions that installed a scraper system. A general trend toward enlargement and enclosure of pig houses for all growth phases was gaining popularity in most regions in recent years. A steady shift to three site production from a lumped system was also observed to prevent a disease transfer. The structural design of a standard pig house with its environmental control systems including ventilation and heating/cooling system was suggested for further validation study. In-depth analysis of the survey data is presented in the Results and Discussing section.

• Journal of Animal Environmental Science
• /
• v.20 no.3
• /
• pp.117-124
• /
• 2014

The objectives were to assess the use of near-infrared reflectance spectroscopy (NIRS) as a tool for estimating nutrient compositions of corn kernel, and to apply an NIRS-based indium gallium arsenide array detector to the system for collecting spectra and analyzing calibration equations using equipments designed for field application. Partial Least Squares Regression (PLSR) was employed to develop calibration equations based on representative data sets. The kennard-stone algorithm was applied to induce a calibration set and a validation set. As a result, the method for structuring a calibration set significantly affected prediction accuracy. The prediction of chemical composition of corn kernel resulted in the following (kennard-stone algorithm: relative) moisture ($R^2=0.82$, RMSEP=0.183), crude protein ($R^2=0.80$, RMSEP=0.142), crude fat ($R^2=0.84$, RMSEP=0.098), crude fiber ($R^2=0.74$, RMSEP=0.098), and crude ash ($R^2=0.81$, RMSEP=0.048). Result of this experiment showed the potential of NIRS to predict the chemical composition of corn kernel.

• Journal of Information Technology Applications and Management
• /
• v.19 no.4
• /
• pp.227-242
• /
• 2012

It is a daunting task to theorize the process effectiveness of IT convergence based service model. Despite the criticalness of investigating process enhancement impact of IT-convergence based service model, the theoretical research in this field is relatively scarce, possibly due to the too wide and comprehensiveness of research scope. In this vein, we conducted exploratory study to understand the contributional impact of IT convergence based service model on resolving service process limitations. We first identified five IT convergence based service models in the area of typical service industry, which include entertainment, learning, location based services, tourism, and healthcare. Our research model classified value creation factors of the IT convergence model in twofold. The one is defined as basic value creation factor of the IT convergence, which is treated as the second-order factor that consists of two first-order factors of mobile functionality and Internet with digital contents merging functionality. The other is defined as service process limitations resolving factor which are comprised with the two first-order factors of simultaneousity and perishability. Both the second-order factors are modeled, each respectively, with the two first-order factors in formative manner. Using PLS, empirical validation is executed to analyze each value creating factor's contribution impact on the relative advantage, as well as the mediating effect of basic value creation factor on resolving service process limitations. On the basis of the insights revealed from this paper, further theory building research could be elaborated in the area of IT convergence applications for service industry.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.1-9
• /
• 2007

Sensitivity analysis of wind resource micrositing has been performed through the application case at the Antarctic King Sejong station with the most representative micrositing softwares: WAsP, WindSim and Meteodyn WT. The wind data obtained from two met-masts separated 625m were applied as a climatology input condition of micro-scale wind mapping. A tower shading effect on the met-mast installed 20m apart from the warehouse has been assessed by the CFD software Fluent and confirmed a negligible influence on wind speed measurement. Theoretically, micro-scale wind maps generated by the two met-data located within the same wind system and strongly correlated meteor-statistically should be identical if nothing influenced on wind prediction but orography. They, however, show discrepancies due to nonlinear effects induced by surrounding complex terrain. From the comparison of sensitivity analysis, Meteodyn WT employing 1-equation turbulence model showed 68% higher RMSE error of wind speed prediction than that of WindSim using the ${\kappa}-{\epsilon}$ turbulence model, while a linear-theoretical model WAsP showed 21% higher error. Consequently, the CFD model WindSim would predict wind field over complex terrain more reliable and less sensitive to climatology input data than other micrositing models. The auto-validation method proposed in this paper and the evaluation result of the micrositing softwares would be anticipated a good reference of wind resource assessments in complex terrain.

• Journal of the Korean Dietetic Association
• /
• v.12 no.2
• /
• pp.200-215
• /
• 2006

This study carried out to assess the quality of the information presented on the internet about nutrition specifically in the field of health functional food by monitoring with 10 panels from May, 2004 to October. Four hundred seven relevant websites were initially selected from a process using 5 search engines and the keywords ‘food’ and ‘nutrition’, and 404 sites actually met all inclusion criteria. Most of the sites evaluated 219 (54.20%) were commercial sites and then distributed noncommercial organization site 93 (23.0%), individual site 92(22.8%). Assessment quality indicator was carried out using the 17 necessary requisites, which has been developed to enable users and information providers to judge the quality of food and nutrition information. The mean score for quality grade was 11.07, five site out of a maximum score of 17 and two sites with the lowest total scores for the quality of food and nutrition information. Noncommercial organization site assessed achieved the highest score in accurate and useful informations to the public. Low ranked sites had the most inaccurate or misleading information, emphasizing only the positive aspects of the information, with little or no evidence. Many commercial sites used personal testimony as the most popular ‘proof’ for the effectiveness of product. This was anecdotal rather than scientific evidence based on which the objective validation was difficult to be made. Therefore, it can be challenging for both public and health professionals, to sort out useful information from a plethora of advertisements and promotions on the web sites. Our results suggest that nutrition professionals should talk about useful information of health, food and nutrition with public and help them find the best available information when using the internet.

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.263-272
• /
• 2013

This study was conducted to look into consulting areas that can secure loyalty customers by clarifying relations between perceived quality factors, brand image and customer loyalty in terms of a multi-function printer. To accomplish the study purpose, this study carried out a validation analysis, a reliability analysis and a structural equation model analysis by setting up a study model and a hypothesis based on precedent studies and collecting data from purchase decision-makers. The findings of the study are summarized as follows. First, effects of perceived quality components of a multi-function printer on brand image were product quality, sales man's service and service quality in order of majority. Second, brand image of a multi-function printer has a positive impact on customer loyalty. This study is meaningful as it expanded the scope of study related to a multi-function printer up to the administrative field. This study is expected to help industries, who have similar business structure of a multi-function printer, establish a business strategy and support practical work and administrative consulting.