• ETRI Journal
• /
• 제27권5호
• /
• pp.525-532
• /
• 2005

In this paper, we propose and present implementation results of a high-speed turbo decoding algorithm. The latency caused by (de)interleaving and iterative decoding in a conventional maximum a posteriori turbo decoder can be dramatically reduced with the proposed design. The source of the latency reduction is from the combination of the radix-4, center to top, parallel decoding, and early-stop algorithms. This reduced latency enables the use of the turbo decoder as a forward error correction scheme in real-time wireless communication services. The proposed scheme results in a slight degradation in bit error rate performance for large block sizes because the effective interleaver size in a radix-4 implementation is reduced to half, relative to the conventional method. To prove the latency reduction, we implemented the proposed scheme on a field-programmable gate array and compared its decoding speed with that of a conventional decoder. The results show an improvement of at least five fold for a single iteration of turbo decoding.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1195-1201
• /
• 2011

Since the release of safety standard IEC 61508 which defines functional safety of electronic safety-related systems, SIL(Safety Integrity Level) certification for railway systems has gained lots of attention lately. In this paper, we propose a new design technique of the computer board for train control systems with high reliability and safety. The board is designed with TMR(Triple Modular Redundancy) using a certified SIL3 Texas Instrument(TI)'s TMS570 MCU(Micro-Controller Unit) to guarantee safety and reliability. TMR for the control device is implemented on FPGA(Field Programmable Gate Array) which integrates a comparator, a CAN(Controller Area Network) communication module, built-in self-error checking, error discriminant function to improve the reliability of the board. Even if a malfunction of a processing module occurs, the safety control function based on the proposed technique lets the system operate properly by detecting and masking the malfunction. An RTOS (Real Time Operation System) called FreeRTOS is ported on the board so that reliable and stable operation and convenient software development can be provided.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권2호
• /
• pp.136-144
• /
• 2014

The existing conventional motion controller does not perform well in the presence of nonlinear properties, uncertain factors, and servo lag phenomena of industrial actuators. Hence, a feasible and effective fuzzy self-tuning proportional integral derivative (PID) and feed-forward control scheme is introduced to overcome these problems. In this design, a fuzzy tuner is used to tune the PID parameters resulting in the rejection of the disturbance, which achieves better performance. Then, both velocity and acceleration feed-forward units are added to considerably reduce the tracking error due to servo lag. To verify the capability and effectiveness of the proposed control scheme, the hardware configuration includes digital signal processing (DSP) which plays the main role, dual-port RAM (DPRAM) to guarantee rapid and reliable communication with the host, field-programmable gate array (FPGA) to handle the task of the address decoder and receive the feed-back encoder signal, and several peripheral logic circuits. The results from the experiments show that the proposed motion controller has a smooth profile, with high tracking precision and real-time performance, which are applicable in various manufacturing fields.

• 한국정보통신학회논문지
• /
• 제15권11호
• /
• pp.2285-2291
• /
• 2011

이 논문에서는, 화면내 예측기, CAVLC(구문기반 적응가변길이 부호화기), DDR2 메모리 제어모듈을 집적화한 H.264 하이프로파일 화면내 부호화기를 제안한다. 설계된 부호화기는 한 매크로블록당 440 cycle에 동작할 수 있으며, 부호화기의 기능을 검증하기 위하여, JM13.2으로부터 참조 C 코드를 개발하고, 참조 C코드로부터 생성된 테스트벡터를 이용하여 개발된 하드웨어를 검증하였다. 개발된 부호화기는 FPGA에서 검증하였으며, DMA 는 200MHz에서, 부호화기모듈은 50MHz에서, 영상입력모듈(VIM)은 25MHz에서 동작한다. 회로의 크기는 Virtex 5XC5VLX330을 사용시에 약 20%의 LUT(43099개)를 사용하였다.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5427-5433
• /
• 2012

본 논문에서는 자동차 변속기 오일레벨을 정확하고 손쉽게 측정할 수 있는 초음파 오일레벨 측정기를 개발하고 실험을 통하여 유용성을 보였다. 초음파 프로브 구동 펄스 생성과 오일레벨 연산을 비롯한 모든 디지털 신호 처리가 하나의 FPGA에 의해서 이루어지도록 하여 측정기의 단순화와 고성능화를 이루었고, 모든 프로그램을 FPGA 프로젝트 IDE상에서 제작하여 측정기 개발 시간을 줄일 수 있었다. 또한, 저-레벨의 초음파 에코 신호를 처리하기 위한 송수신 스위치회로, 다단 능동 필터회로 및 포락선 검출회로 등을 설계하였고, 실험을 통하여 설계된 측정기가 약 1mm 이내의 측정 정확도를 가짐을 확인하였다.

• ETRI Journal
• /
• 제29권3호
• /
• pp.363-370
• /
• 2007

In this paper, we propose a flexible turbo decoding algorithm for a high order modulation scheme that uses a standard half-rate turbo decoder designed for binary quadrature phase-shift keying (B/QPSK) modulation. A transformation applied to the incoming I-channel and Q-channel symbols allows the use of an off-the-shelf B/QPSK turbo decoder without any modifications. Iterative codes such as turbo codes process the received symbols recursively to improve performance. As the number of iterations increases, the execution time and power consumption also increase. The proposed algorithm reduces the latency and power consumption by combination of the radix-4, dual-path processing, parallel decoding, and early-stop algorithms. We implement the proposed scheme on a field-programmable gate array and compare its decoding speed with that of a conventional decoder. The results show that the proposed flexible decoding algorithm is 6.4 times faster than the conventional scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1577-1580
• /
• 2004

This paper proposes a design and implementation of transversal adaptive digital filter using LMS (Least Mean Squares) adaptive algorithm. The filter structure is based on Distributed Arithmetic (DA) which is able to calculate the inner product by shifting and accumulating of partial products and storing in look-up table, also the desired adaptive digital filter will be multiplierless filter. In addition, the hardware implementation uses VHDL (Very high speed integrated circuit Hardware Description Language) and synthesis using FLEX10K Altera FPGA (Field Programmable Gate Array) as target technology and uses Leonardo Spectrum and MAX+plusII program for overall development. The results of this design are shown that the speed performance and used area of FPGA. The experimental results are presented to demonstrate the feasibility of the desired adaptive digital filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.758-761
• /
• 2004

This paper proposes a design and implementation of multiplierless digital PID (Proportional-Integral-Derivative) controller using FPGA (Field Programmable Gate Array) for controlling the speed of DC motor in digital system. The multiplierless PID structure is based on Distributed Arithmetic (DA). The DA is an efficient way to compute an inner product using partial products, each can be obtained by using look-up table. The PID controller is designed using MATLAB program to generate a set of coefficients associated with a desired controller characteristics. The controller coefficients are then included in VHDL (Very high speed integrated circuit Hardware Description Language) that implements the PID controller onto FPGA. MATLAB program is used to activate the PID controller, calculate and plot the time response of the control system. In addition, the hardware implementation uses VHDL and synthesis using FLEX10K Altera FPGA as target technology and use MAX+plusII program for overall development. Results in design are shown the speed performance and used area of FPGA. Finally, the experimental results can be shown when compared with the simulation results from MATLAB.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권2호
• /
• pp.133-139
• /
• 2017

Vehicles have increasingly evolved and become intelligent with convergence of information and communications technologies (ICT). Vehicle communications (VC) has become one of the major necessities for intelligent vehicles. However, VC suffers from serious security problems that hinder its commercialization. Hence, the IEEE 1609 Wireless Access Vehicular Environment (WAVE) protocol defines a security service for VC. This service includes Advanced Encryption Standard-Counter with CBC-MAC (AES-CCM) for data encryption in VC. A high-speed AES-CCM crypto module is necessary, because VC requires a fast communication rate between vehicles. In this study, we propose and implement an efficient AES-CCM hardware architecture for high-speed VC. First, we propose a 32-bit substitution table (S_Box) to reduce the AES module latency. Second, we employ key box register files to save key expansion results. Third, we save the input and processed data to internal register files for secure encryption and to secure data from external attacks. Finally, we design a parallel architecture for both cipher block chaining message authentication code (CBC-MAC) and the counter module in AES-CCM to improve performance. For implementation of the field programmable gate array (FPGA) hardware, we use a Xilinx Virtex-5 FPGA chip. The entire operation of the AES-CCM module is validated by timing simulations in Xilinx ISE at a speed of 166.2 MHz.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.9-17
• /
• 2017

Concept development of a real-time Field Programmable Gate Array (FPGA)-based switched Ethernet data communication network for the Man-Machine Interface System (MMIS) is presented in this paper. The proposed design discussed in this research is based on the systems engineering (SE) approach. The design methodology is effectively developed by defining the concept development stage of the life-cycle model consisting of three successive phases, which are developed and discussed: needs analysis; concept exploration; and concept definition. This life-cycle model is used to develop an FPGA-based time-triggered Ethernet (TTE) switched data communication network for the non-safety division of MMIS system to provide real-time data transfer from the safety control systems to the non-safety division of MMIS and between the non-safety systems including control, monitoring, and information display systems. The original IEEE standard 802.3 Ethernet networks were not typically designed or implemented for providing real-time data transmission, however implementing a network that provides both real-time and on-demand data transmission is achievable using the real-time Ethernet technology. To develop the design effectively, context diagrams are implied. Conformance to the stakeholders needs, system requirements, and relevant codes and standards together with utilizing the TTE technology are used to analyze, synthesize, and develop the MMIS non-safety data communication network of the APR1400 nuclear power plant.