• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.385-386
• /
• 2023

In this application study, field pilot tests were performed to evaluate the validity of a proposed formula between the exerted electrical energy and SPT N-value based on the result of the basic study. Measurement sensors and recording system were developed to obtain exerted motor current and drilling depth in a field. By using the correlation formula proposed in the basic study, the measured motor current and boring speed were applied to predict SPT N-value and the predicted N-values were compared to SPT N-value of site exploration. From the comparisons it is verified that the exerted electrical energy to bore ground might be used to predict SPT N-value and pile tip location.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.146-155
• /
• 2016

The field feasibility tests for a phytoextraction process were performed to identify the effect of citric acid as a chelate on the uranium (U) transfer into the plant for the naturally U contaminated soil in Duckpyeongri, Korea. For the feasibility tests, lettuce and Chinese cabbage were cultivated for 49 days on four testing grounds ($1m{\times}1m{\times}0.5m$ in each) in 2016. The citric acid solution was added to two testing grounds (one for lettuce and the other for Chinese cabbage) increasing the U transfer in two crop plants and their results were compared to those without the citric acid solution. When without the citric acid solution, the U concentration of plant after the cultivation was low (< $45{\mu}g/kg$ for leaves and < $450{\mu}g/kg$ for roots). However, with the addition of 50 mM citric acid solution, the U concentration of lettuce leaves and roots increased by 24 times and 1.8 times, and the U concentration of Chinese cabbage leaves and roots increased by 86.7 times and 5.4 times. The absolute accumulated U amount (${\mu}g$) in lettuce and Chinese cabbage also increased by 8.7 times and 50 times, compared to those without citric acid solution. Less than 8% of the U amount of exchangeable/carbonate phases was removed by using the lettuce and Chinese cabbage when the citric acid solution was not applied. However 52% and 66% of the U amount in exchangeable/carbonate phases were removed by the lettuce and the Chinese cabbage when the citric acid solution was added. The effect of the citric acid on the U transfer capability into the plants was quantitatively investigated by the field feasibility test, suggesting that U existing as exchangeable/carbonate phase in soil can be successfully removed by the phytoextraction process using Chinese cabbage with citric acid.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.4
• /
• pp.15-27
• /
• 2013

In order to plan out the Daegu G membrane filtration water treatment plant, water quantity, water quality and process stability were evaluated using the field pilot-scale tests, during the six months of continuous operation, including low water temperature period. The field model experiments, which were carried out according to the Installation Criteria of Ministry of Environment, consisted of two series : series 1 - water quality verification, and series 2 - membrane process evaluation. The process water quality met all drinking water standards with less than 0.03 NTU. Moreover, process operation showed a stable membrane pressure with 99% of recovery ratio. This shows that the tests were properly designed in terms of the influence of water loading and temperature. In conclusion, the purpose of this study is to establish core technology for advanced drinking water treatment, through on-going accumulation of engineering and construction know-how.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2021

In this study, a study related to laboratory and pilot test were performed to use an environmental soil stabilizer developed to induce a hardening reaction similar to that of Ordinary Portland Cement (OPC) by using industrial by-products of blast furnace slag and the combustion ash of a circulating fluidized bed boiler as the main material. For this, specimens were prepared using liquid A of sodium silicate and silica sol, and liquid B of an environmental soil stabilizer (or OPC), and laboratory tests were performed to analyze the strength and environmental characteristics. And pilot test was performed on the aging reservoir, field permeability test and electrical resistivity survey were performed in the field to analyze the applicability. As a result of the laboratory test, the homo-gel compressive strength of the chemical injection material using the environmental soil stabilizer as liquid B was about 2.88 to 3.23 times greater than that of OPC. In addition, the elution amount of most heavy metals was lower than that of OPC, and the survival rate in the fish, acute toxicity test was 100%. Therefore, when judged based on the results of the laboratory test, it was analyzed to be superior to OPC in terms of strength and environment. In the results of the pilot test in the aging reservoir, when the environmental soil stabilizer was reinforced with liquid B of the chemical injection material, the coefficient of permeability in the aging reservoir decreased to 1/50 level. In addition, as a result of the electrical resistivity survey, it was analyzed that the electrical resistivity inside the aging reservoir increased as time passed, the saturation zone disappeared, and the overall reinforcement.

• Journal of The Korean Association For Science Education
• /
• v.19 no.4
• /
• pp.645-652
• /
• 1999

The effects of number, source, and sequence of analogs on middle school students' concept recall and application were investigated. Based on the number (one/two) and source(everyday/science) of analogs, four types of learning materials were developed and pilot-tested. Prior to the treatment the field dependence/independence (FD/l) test was administered and the scores were used as a blocking variable. The learning materials were read by randomly assigned middle school students (N=88), and the concept recall and application test was administered immediately and four weeks later. In the immediate and retention tests, there were no significant main effects of number, source, and sequence of analogs. In the application problems of retention test. however, there were some significant interaction effects with students' FD/I. Field-independent students who learned with two analogs scored significantly higher than those who learned with one analog. In the case of using two analogs, field-dependent students who learned with everyday-analog first scored significantly higher than those who learned with science-analog first.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.1
• /
• pp.23-34
• /
• 2019

It is an urgent issue to manage and reduce non-point pollution sources for improving the water quality of stream and lakes in rural areas. In this study, in order to reduce non-point pollution sources in rural area, Gabion mattresses was proposed to provide protection of riverbanks with anaerobic and aerobic area. The utilization of this was assessed by lab scale model test and pilot plant test. After filling the inside of the gabion mattresses with aggregate, the filtration zone under anaerobic and aerobic conditions was formed to treat the contaminants. In addition, vegetation was deposited on the surfae of the gabion to prevent the inflow of soil and to promote purification by the plant. COD and nitrogen content (T-N, $NH_4{^+}$, -N, $NO_3{^-}N$) were monitored in model and field tests. The lab scale model test showed removal efficiency of 17% of TCOD, 35% of SCOD, 14% of TN, 62% of $NH_4{^+}$, -N, and 33% of $NO_3{^-}$ N. Also, pilot plant test showed removal efficiency of 24% of TCOD, 29% of SCOD, 47% of TN, 50% of $NH_4{^+}-N$, 33% of $NO_3{^-}$, N and 29% of TP.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.115-123
• /
• 2018

Various types of robots running on power transmission lines have been developed for the purpose of line patrol monitoring. They usually have complex mechanism to run and avoid obstacles on the power line, but nevertheless did not show satisfactory performance for going over the obstacles. Moreover, they were so heavy that they could not be easily installed on the lines. To compensate these problems, flying robots have been developed and recently, multi-copter drones with flight stability have been used in the electric power industry. The drones could be remotely controlled by human operators to monitor power distribution lines. In the case of transmission line patrol, however, transmission towers are huge and their spans are very long, and thus, it is very difficult for the pilot to control the patrol drones with the naked eye from a long distance away. This means that the risk of a drone crash onto electric power facilities always resides. In addition, there exists another danger of electromagnetic interference with the drones on autopilot waypoint tracking under ultra-high voltage environments. This paper presents a patrol monitoring plan of autopilot drones for power transmission lines and its field tests. First, the magnetic field effect on an autopilot patrol drone is investigated. Then, how to build the flight path to avoid the magnetic interference is proposed and our autopilot drone system is introduced. Finally, the effectiveness of the proposed patrol plan is confirmed through its field test results in the 154 kV, 345 kV and 765 kV transmission lines in Chungcheongnam-do.

• Journal of the Society of Disaster Information
• /
• v.3 no.2
• /
• pp.147-169
• /
• 2007

This study investigates the reinforcing effects of the Multi-bar Spring nails with respect to the conventional Soil-nails in artificial slopes. Based on wide experience related to design and construction, soil nails have been widely applied to reinforce slope in the world. Multi-bar spring nails are one of the improved soil nailing methods. These method maximizes bending, shearing, pull-out resistance for those multi-nails, not unit nail, that are inserted in the borehole using special spacer at regular intervals. In addition, because cutting plane is confined effect resulting from a pressured plate at the end of the nails with compression spring equipment, slope stability is secured using MS-nailing method. Analyzing bending, pull-out, shearing condition of MS-nail, it was examined throughly elastic region, load transfer capacity, reinforcing effect on cutting plate of MS-nails. In addition, Pilot and laboratory tests, numerical analysis were carried out to verify the superiority of MS-nailing method. In case, MS nailing method is applied to reinforce artificial slope, it was analyzed that bending, pull-out, shearing resistance was increased more than existing nailing method was applied. In this study, it was shown that surface failure was more or less prevented using MS-nailing method, confining effect on cutting plane using spring stuck to flexible equipment.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.2
• /
• pp.27-38
• /
• 2018

Purpose - This study centers on field surveys aimed at deriving the customer satisfaction factors of customer support centers that are positioned between suppliers and consumers in the supply chain. They consists of manufacturing, sales, distribution, consumption and collection, and that are in charge of core functions for suppliers' customer satisfaction management and consumers' satisfaction with consuming activities. Research design, data, and methodology - The customer satisfaction factors of customer support centers were derived through literature review and expert opinion surveys, and a questionnaire was developed through a process of the refinement of variables using pilot tests and 330 questionnaire sheets were distributed. The questionnaire sheets were collected and opinions in them were analyzed using fuzzy AHP methodology. Results - Three factors, which are turnover intentions, motivation, and job satisfaction, were derived as customer satisfaction factors of customer support centers, and the ranking relationships of these three factors were analyzed. In addition, the ranking relationships among six execution variables of turnover intentions, 10 execution variables of motivation, and 10 execution variables of job satisfaction were analyzed using fuzzy AHP methodology to obtain quite significant results. Based on the results of this study, three implications in the three strategic aspects and an implication in the academic aspects are presented. Conclusions - Motivation and job satisfaction, job satisfaction and turnover intentions, and motivation and turnover intentions are not formed by independent or different factors or environments. They are in the same context with each other (maintaining high correlations) and are in the relationships of virtuous circles in which they complement each other.

• Journal of Advanced Navigation Technology
• /
• v.3 no.2
• /
• pp.108-119
• /
• 1999

In recent, there has been remarkable progress in the field of GPS applications. In a few years, an appreciable number of aircraft will adopt GPS as a landing guidance system because GPS is more economic, more reliable and more accurate than any other aviation systems. In this respect, we have performed several helicopter landing flight tests based on the real-time DGPS system made in SNUGL (Seoul National University GPS Laboratory). From the experimental results, we found several problems Which should be fixed to adopt DGPS as a aircraft landing guidance system. In this paper, we will introduce the problems found in tests and also suggest modifications to solve the problems. Our modifications can be classified into three parts. The first is about the attitude determination with single GPS antenna. The second deals with the cockpit display module. The display was devised to integrate the Instrument Landing System(ILS) with tunnel-the-sky using virtual reality. With the display, pilot can achieve more safe landings. The last part is the digital map. We inserted digital map into our system and put direction indicator on the map using position information from GPS. It is very useful for pilot to find airports even in bad weather. Using the newly designed DGPS landing system, we conducted flight test at Kimhae International Airport, Pusan, Korea. It was successful! Our system can also satisfy Category-I criterion for aircraft landing approach and determine attitude angle with a high level of reliability. It is supported by video materials.